Strength. Wholesale

High Strength Steel Products (P6-20A)

• Place of origin:  

  Korea

Introduction Project : P6-20A Press line : 1000Ton Delivery : 14Weeks Customer : PHN[MALAYSIA] Material : DP600[590Mpa]

[Related Keywords : Pressing tool, Strength Steel]

Spring Mount (Deflection : 25mm, 50mm)

• Place of origin:  

  Korea

It is a closed-spring mount with excellent anti-vibration effects. Because the spring is not exposed to the outside, it is corrosion-resistant and it has a gauge at the center to help check deflection. The top and bottom housings are made of P O LYCA R B O N AT E plastic, w hich is st able regardless of load and strength, and anti-friction inside the housing reduces structure-borne noise. Plus, t

[Related Keywords : vibration control]

Fiber Laser Cutting Machine HS-CG2560 Series

• Place of origin:  

  Korea

strength and quality Overseas big machine suppliers, such as Bystronic, LVD, etc., also are using IPG laser source. 4)Low failure rate, only 3%, such low failure rate can make sure that your production can not be affected very much . 5)Light power can be seen in real time 6) IPG has been in laser industry for very long time, it has very good after-sale service support all over the world, problems

[Related Keywords : laser cutting]

Welding Coupler

• Place of origin:  

  Korea

strength. This company’s welding coupler performs melting and bonding rebar at 1800A and for less than 1 second. This way ensures nearly ‘zero’ formation of bubbles like shown in a relevant image as above. Meanwhile, the melting and bonding process decreases the tensile strength of SD600 rebar from 780~840N/mm2(Newton) by 50~ 80N/mm2 to 720~760N/mm2 because the process is naturally followed

[Related Keywords : welding coupler, rebar, Seismic-risistant rebar, coupler]

Precision Leveller

Weight (kg) 100 150 200 100 150 200 300 Coil Thickness (mm) 0.1~1.0 0.1~1.0 01~0.7 0.2~2.0 0.2~2.0 0.2~2.0 0.2~1.6 Roll DiA (mm) Ø12 Ø12 Ø12 Ø19 Ø19 Ø19 Ø19 Roll Quantity (mm) 19 19 19 19 19 19 19 Line Speed (M/mm) 0~30M/min Design can be changed for quality upgrade. (Figures on column are based on tensile strength 40kg/mm2)

[Related Keywords : Precision Leveller, Processing Machinery]

Concrete Curing Autoclaves

• Place of origin:  

  Korea

strength of joint in concrete or bond stress with reinforcing bar can be reduced. If concrete is overloaded before hardening, it results in deformation or cracking. There are many methods to accelerate concrete hardening, such as chemical admixtures, steam curing, autoclave curing, pressure curing, electric curing and heat curing. The Manufacturing Process of ALC (Autoclaved Lightweight Concrete)

[Related Keywords : Concrete Curing Autoclaves]

Polyester Strap,Pat Band

• Place of origin:  

  Korea

Dear Sirs, Polyester strap is a innovative strap which have a strong point and solve a week point of PP and steel strap,made through manufacturing process with Polyethylene terephthalate(PET) as row material. It is used for wide appication from light to heavy packaging, is working with hand tools,hand welding machine and auto welding machine, has high breaking strength and effective elasticity

[Related Keywords : Polyester strap, pat band, binder, banding machine]

GRP Water Tank(Grp Panel Tank)

Strength - 850kg/cm2 Flexural Strength - BS 2782 Part 10 Method Flexural Modulus - 12.0GPa Water Absorption Rate - <0.20% Barcol Hardness - Over 40 Glass Fiber Content - >30% Material Characteristics and Specification Specific Gravity - 1.39-1.7 Impact Strength - 50kg/cm2 Shore Hardness - D90 Shear Strength - 830kg/cm2 Thermal Expansion - 2.1 x 105 ASTM D 696-79 Thermal Conductivity - 0.15 cal/m.

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

Brazing Filler Metal

strength Density JIS NO Ag Cu Zn Cd etc °C ㎏/ ㎡ g/ ㎤ SBA45 45 15 16 24 - 605~620 45~50 9.0 BAG-1 SBA50 50 15.5 16.5 28 - 625~635 50~60 9.1 BAG-1A SBA35 35 26 21 28 - 605~700 35~40 8.8 BAG-2 SBA50N 50 15.5 15.5 16 Ni3 630~690 45~55 9.2 BAG-3 SBA40N 40 30 28 - Ni2 670~780 45~50 8.8 BAG-4 SBA45S 45 30 25 - -

[Related Keywords : brazing filler metal, silver filter]

Ultrasonic Plastic Welding Machine

bad welding quality on the LCD screen. 2 Steps amplitude function Contributing to precise welding operation and improving the welding strength for non-crystalline materials such as ABS and Acryl. Application for additional pneumatic jig and transfer jig. Equipping the control device for external pneumatic equipment (fixing clamp, transfer jig and soundproof door) in the control unit.

[Related Keywords : welder, engineering, machine]

Aluninum Coil Brazing Machine

• Place of origin:  

  Korea

We have very special design to avoid an orange peel phenomenon crack and an erosion on brazing of aluminum u-bends coils. We have built several types of gas flame brazing/soldering machines for brazing of aluminum u-bends for heat exchangers. This machine has three stage flame control functions and memory control of flame strength, conveyor speed, burner height, burner width & degree, as options.

[Related Keywords : Brazing machine, U-bend brazing machine, Heat exchanger brazing machine, Brazing equipment]

Fatigue Tester

a data against interruption electric power source Specifications Fatifue( & Endurance) test high cycle Fatigue-low cycle/ fatigue-variety Fatigue-low cycle/ Fatigue-variety Kind of simulations Tensile & compression test Crook test Capability test at the high temp-high temp tensile strength test-high temp crook test High temp & fatigue test Low temp fatigue test Formal spring constant test

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Transfer Robot

Model YTR-1000 YTR-1200 YTR-1500 Feed Stroke Stroke 750-1000mm 950-1200mm 1150-1500mm Up/Down 30-60 40-75 60-100 YPL-121920 Clamp Method Vacuum or Magnet YPL-191910 Max size 350 x 300mm 400 x 500mm 700 x 500mm YPL-191915 Weight 3kg x 2 4kg x 2 5kg x 2 Tack Time(with out press) Feed accuracy 1.7sec 2.0sec 2.5sec ？0.2mm ？0.2mm ？0.3mm(Figures on column are based on tensile strength 40kg/mm2)

[Related Keywords : transfer robot]

Sandwich Panel Production Line

• Place of origin:  

  Korea

strength. Also, this material safe from fire because it doesn’t make any toxic gas. This sandwich panel production line is a fully automation equipment system which can produce various shapes of sandwich panels. Especially, this machine uses mineral-wool and rock-wool as a core material. Our CE qualified mineral-wool and rock-wool sandwich panel production line already has been recognized

[Related Keywords : sandwich panel production line, PU PIR sandwich panel, EPS sandwich panel, Mineral wool panel line]

Homo-reactron

• Place of origin:  

  Korea

strength of the vacuum, the vacuum pump can be selected and Depending on the temperature of the heating or the cooling must be Decide the specifications of the circulating device Specification Min. mixing volume : 450 ml, Min. emulsifying volume : 1,100 ml Max. working volume : 2,000 ml Max. temperature on product/sealing : 90~230° C Max. vacuum/pressure : 2kPa/ on request Speed range/stirre

[Related Keywords : Homogenizing, Reactor, Vacuum, Laboratory Reactor]

Polylink

POLYLINK Crosslinkable polyethylene(XLPE) compound that gives excellent heat & pressure resistance and superior impact strength with grafted silane to polymer chain.

[Related Keywords : POLYLINK]

Vacuum Brazing Machine of CVD Diamond

• Place of origin:  

  Korea

• Price Condition:  

  FOB

- Brazing of CVD polycrystal / single crystal diamond - High speed - No Oxidation (Diamond never burn) - Improvement of work environment - Enhancement of strength - Reduction of distortion - Easy control of temperature

[Related Keywords : Vacuum brazing machine, CVD diamond]

Spring

• Place of origin:  

  Korea

• Price Condition:  

  FOB Busan, Korea

strength efficiently. The shape of hook is changeable according to various purpose and tension springs make use of the coil in general like compression springs. Processing scope is Dia.0.05mm~10.0mm Tolerance by characteristics can be controlled within 5% 2. Compression coil springs *Compression springs make the best use of the coil in general. It is easy to design and manufacture and its cost is

[Related Keywords : Coil, spring, compression, damper]

Gas Spring

strength to open/close covers on machines/tanks that operate horizontally, on semiconductor equipment, and where the general gas spring can not apply. Pull Type Gas Spring KGP Series (Pull Type Gas Spring) has various strengths, including small Spring Constant, Long Stroke, speed control at compression, and stable strength compared to general Plate Spring or Coil Spring and is widely used across

[Related Keywords : gas spring, industrial gas spring, pull type gas spring, free lock gas spring]

Special Adhesive Binder for Making Iron Ore Slime Briquette

• Place of origin:  

  Korea

Application: Iron Ore Slime 1. Recycling iron ore slime 2. Effective waste management 3. Cost-Saving by recycling by-product 1. Powder type binder for Iron ore slimes 2. Reasonable price compared to other binders 3. Excellent early-age strength Compressive strength: 100kgf/cm2 min. 4. Natural drying or hot air dry are available 5. Excellent heat-resistant strength at 1000℃ min. We are also sel

[Related Keywords : binder, iron ore slime, briquette]