Compression Spring Wholesale

Spring Mount

• Place of origin:  

  Korea

- As a type of FSL series, it uses SMA2 type (static deflection of 50mm) and prevents damage and distortion of the equipment and pipe. The upper housing (compression plate) has a restrain bolt and level bolt, while the CR-type acoustical non skid pad on the bottom is to prevent the transfer of high-frequency vibration). - Though it has same features as FSL2 type, it uses a spring with the static

[Related Keywords : vibration control]

Grid Coupling

• Min. Order:  

  20 Set

• Price:  

  US$ 30 ~ 60000

• Place of origin:  

  Korea

spring hardness. Shot peening, a high-precision operation, is the surface molecules compressed by high-velocity steel micro beads. The compression of the molecules results in a dramatic increase in strength rating. Also, it provides reserve strength for a longer part of life. The tapered grids are accessible through the unit's removable cover. It is extremely easy to fit the trapezoidal grids int

[Related Keywords : grid coupling, coupling, industrial shaft coupling]

Reducing Leaded Brass Valve - Noise Prevention Function

• Min. Order:  

  100 Piece

• Price:  

  US$ 36

• Place of origin:  

  Korea

under the condition of 15-25kgf/cm²thanks to supplementary elasticity effect made by pressure-adjusting spring and compressing spring. ● Water can be supplied smoothly under comparatively low set pressure (3-5􀀃kgf/cm²) even in low-rise and high-rise building. ● Strainer filtering foreign substance at inlet or backflow preventive value preventing backflow can be attached optionally.

[Related Keywords : Water Meter, Water Supply, Water Gauge]

KCP Taper Grid Coupling

• Min. Order:  

  10 Set

• Price:  

  US$ 10 ~ 100000

• Place of origin:  

  Korea

spring hardness. Through a high-precision operation called shot peening, the surface molecules are compressed by high-velocity steel micro beads. The compression of the molecules results in dramatic increase in strength rating and provides reserve strength for a longer part life. The tapered grids are accessible through the unit's removable cover. It is extremely easy to fit the trapezoidal grids

[Related Keywords : grid coupling, coupling, shaft coupling, KCP]

HIFLUX - High Pressure Relief Valve - Field Adjustable 1000psi - 20000psi

• Min. Order:  

  1

• Price:  

  USD 1

• Place of origin:  

  Korea

• Price Condition:  

  EXW INCHEON

• Supply Ability:  

  100000 / Month

Spring compression Length(mm) 1,000~10,000psi RV10FAS04 2,500 2.58 5,000 5.15 7,500 7.73 10,000 10.31 10,000~20,000psi RV20FAS04 12,500 6.96 15,000 8.35 17,500 9.74 20,000 11.13 - The pressure of inlet port effects set pressure. - Turn right to increase set pressure. - Turn left to decrease set pressure. - a tolerance value : ± 8% * Other product High pressure needle valve High pressure pipe nee

[Related Keywords : Relief Vave, needle valve, check valve, regulator]

Pouch Rotary Packing M/C [ST-9A1W]

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Pouch Rotary Packing M/C [ST-9A1W] Introduction - As a high-speed rotary packaging machine (50-90pouch/min), the gripper structure of the product made by STS precision casting, has built in compression spring inside to enhance hygiene and safety. Operating in high speed with less noise, the product is truly a labor-saving packaging machine Features - In the method of grooved cam type, driving p

[Related Keywords : Rotary, packing machine, premade bags, Pre-Made]

Pneumatic Fender(YPF)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Compression Test Note 1. The above compression test according to JIS K6301-1994. And about the same size, in the case of identifying the test method above the two kinds, below two methods are adopted. -hardness test : Spring type hardness test(A type) -aging test : air heating aging test/ttest temperature -70±1°C/test time -96hours 2. Above detail performance of components can be changed depen

[Related Keywords : pneumatic fender, rubber fender, marine fender]

Rope Gripper

springs, providing a constant force on the elevator ropes, even with the spring extended to less than half their original compressed value. Open Position (Normal Status) When the " Rope GripperTM " is in its open position, the springs are fully compressed and prevented from extending by an electric solenoid trigger mechanism. When the electric solenoid is de-energized, the springs will extend fo

[Related Keywords : Auto Lighting System, Rope Gripper]

Fatigue Tester

a data against interruption electric power source Specifications Fatifue( & Endurance) test high cycle Fatigue-low cycle/ fatigue-variety Fatigue-low cycle/ Fatigue-variety Kind of simulations Tensile & compression test Crook test Capability test at the high temp-high temp tensile strength test-high temp crook test High temp & fatigue test Low temp fatigue test Formal spring constant test

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Spring

• Place of origin:  

  Korea

• Price Condition:  

  FOB Busan, Korea

spring according to the customer's specified requirements. 1. Tension coil springs * Tension springs make use of any spaces and its initial strength efficiently. The shape of hook is changeable according to various purpose and tension springs make use of the coil in general like compression springs. Processing scope is Dia.0.05mm~10.0mm Tolerance by characteristics can be controlled within 5% 2.

[Related Keywords : Coil, spring, compression, damper]

Gas Spring

Industrial Gas Spring Industrial Gas Spring that uses nitrogen gas has general specific characters of spring, long stroke, small repulsive force, lifts big loads with small units, allow speed control in compression and can be used in a variety of application. Industrial Gas Spring also ensures stability compared to plate spring and coil spring. KOBA provides customized industrial gas spring for s

[Related Keywords : gas spring, industrial gas spring, pull type gas spring, free lock gas spring]