Resistor. Wholesale

Solid Insulated Pole Mount Load Break Switch

Resistor - RTU Built-In/Separable type, Digital control RATINGS Item Rating Item Rating Rated Voltage(kV) 15/27 Basic Impulse withstand voltage (kV 1.2x50㎲) 110/150 Rated Current(A) 400/630 Control cubicle Operation voltage AC 1Ф 110/ 220V Frequency 50/60 Control power DC24V Short time withstand current (kA) 12.5(R.M.S.) Permeable Voltage 85~110% Making current capacity (kA)

[Related Keywords : load break switch, solid load break switch, solid pole mount switch, solid switch]

PIR & Microwave Motion Detector(Dual)

resistors LED INDICATOR Yellow LED is blinking during warm up period and self testing Red LED:ON during alarm. Green LED:PIR CHANNEL. Yellow LED: MW CHANNEL TAMPER SWITCH N.C 28Vdc 0.1A with 10Ohm series protection resistor – open when cover is removed OPERATING TEMP -10°C/+55°C CERTIFICATED TEMP +5°C/+40°C WARM UP PERIOD 1 min DETECTION ANGLE 130 ~ 150 degree DETECTION RANG

[Related Keywords : microwave, detector, sensor, security]

Float Type Level Transmitter

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Product introduction Providing electric voltage of DC 24V to the sensor, it makes output of 4~20mA current which is converted by resistors in the sensor.The continuous fluctuation of the current is caused by the up-and-down movement of the float which has permanent magnet in it.Finally, the current output is transmitted to the controller. Product Specification and Features For indicating liquid

[Related Keywords : sensor, controller, level switch transmitter, level sensor]

Float Type Level Transmitter (ST-600)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Principle: Reed switches which are built in the sensor are operated by the magnet float which moves up and down on stem according to the material level. At this time, resistance value from the resistors which are connected side by side with reed switches is changed between R1 and R10 according to the location of operating reed switch and this output value is transmitted to convertor and it is cha

[Related Keywords : Transmitter, Float Type Level Transmitter]

Brake Controller

resistor. Generated voltage, brakin speed and discharge resistance are proportioned to each other, therefore, high speed brakin needs the high tenstion devices and resistance. As this products had used 2.8 times high tension devices and enlarged discharge resistor than traditional products, the brakin speed has been improved appoximately over twice. Main fuctions of SH-BSS-100 Strong magnetized c

[Related Keywords : Seshin Electric, Conveyor Controller Protecting Switches, Industrial Barkes Controller]

Tabular / Flat / Radial Type

resistor. Its production with the capacity of 10-40KVDC (100-60000pF)is possible. Depending on requirement, the shape and special ratings can flexibly be made to cope with the needs. The change in electrostatic capacity to temperature characteristic is positive whit less change and stable performance. Specification (The capacitor under test shall be completely molded onto resin) 1. Operating

[Related Keywords : Tabular, Flat, Radial]

Energy Conversion Trainer

• Place of origin:  

  Korea

port for charging battery Load Port for connect to DC Load or inverter Curve Tracer I-V Curve Characteristics Built-in Load AC Power Supply 1Ø 6V/ 9V/ 12V/ 15V/ 18V/ 21V/ 24V AC output 3Ø 6V/ 12V/ 18V/ 24V AC output Others Loader (LED/Resistor) : LED Loader (3 color) Resistor loader (3.4Ω ~ 300Ω) DC Electro Loader Start and Reset button DC Input port

[Related Keywords : Energy Conversion Trainer, Conversion Trainer, renewable, pv]

PCB Ink

• Min. Order:  

  50-100kg

• Place of origin:  

  Taiwan

• Price Condition:  

  FOB

Resistor (Roller Coating) Blue [PCB etching resist] Screen LPI LP-460S LP-460 S series is a screen printing contact exposure type photo-imaginable plating resist designed for printed circuit fabrication. It has sharp pattern, high resolution and excellent properties with fine line defined. Also has fast curing speed, excellent coating properties and forming a tough protective film after curing, w

[Related Keywords : pcb ink, fpcb ink, ink, chemical]

Fuel - Water Sensor

• Place of origin:  

  Korea

Pressure sensor elements from First Sensor utilize the „Sensor Technology for Advanced Resistors“ (STARe). This technology is based on the development of suitable materials, layouts and electrical shielding and enables pressure measurement with highest accuracy and stability. We offer product lines for highest precision (High Stability Line) as well as for aggressive media and fluids

[Related Keywords : f, Fuel sensor, map sensor]

The PRIME Lead Acid Digital Battery Discharger (For 12V~96V Group Connected Batteries)_RPT-D10K

• Place of origin:  

  Korea

Resistor and high-frequency pulse, Maximum Limited Discharge Current Rates: Nominal Voltage 9V~20.0V : 50A, 20.1V~26.0V : 100A, 26.1V~38.0V : 150A, 38.1V~50.0V : 200A and 50.1V~110.0V : 100A It supports a monitoring data sheet to be printed, after connecting by a USB between Discharger and PC. Net Weight 42.10kgs Gross Weight: 56.2kgs(Air-Freight) 840 x 530 x 680 mm RPT-D10K can be communicated w

[Related Keywords : Battery Discharger, Regenerator, Battery recycle, Renewable energy]