Min. Order:
1 Carton
Price:
US$ 100
Place of origin:
China
Air Skates are also referred to as air casters, air sleds, air skids and air cushions by various manufacturers around the world. They are usually one and the same. Air Skates or Air Cushion have many advantages. Firstly,heavy loads can be moved in any horizontal direction, safely and accurately. Secondly,ability to transfer heavy objects between halls where cranes cannot gain access. Finally,no u
[Related Keywords : air casters, Air Bearing Casters, air moving skates]
Business Type
Supplier
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Carat
Price:
US$ 100
Place of origin:
China
Air rigging systems works floor just need flat and level is workable. Concrete floor with no water is available. Air rigging systems capacity from ten tons to forty-eight tons, more or less capacity can be customized as demand. Air rigging systems manual instruction. Air rigging systems is powered by compressed air, friendly to environment. Air caster system is the machinery moving and loading,
[Related Keywords : air casters, Air Bearing Casters, air moving skates, air rigging systems]
Business Type
Supplier
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Carton
Price:
US$ 100
Place of origin:
China
Air load skates can circumvent floor or load damage. Floating your load on a cushion of air distributes the weight over a wider surface area, decreasing floor loading. Air load moving systems normally used in four or six air skates, works powered by air bearings powered by compressed air which is free, easy movement of heavy loads. Air load carriers provide the max versatility for transporting l
[Related Keywords : air casters, Air Bearing Casters, air moving skates, air rigging systems]
Business Type
Supplier
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Carton
Price:
US$ 100
Place of origin:
China
load floats on this nearly frictionless layer and can be moved in any direction. The size and weight of the load will determine the number and size of air casters needed. Air casters also know as air skids, air bearings, air skates, air rigging systems, air movers, air film transporters. Shan Dong Finer Lifting Tools co.,LTD have been produced air bearing casters professionally for more than 2
[Related Keywords : air casters, Air Bearing Casters, air moving skates, air rigging systems]
Business Type
Supplier
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Carton
Price:
US$ 100
Place of origin:
China
Air caster do not Damage to flooring. Air casters are remarkably easy to maintain. They have no moving parts, require no lubrication and have no maintenance schedule. If they get dirty, they can be cleaned with mild soap and water. Air load moving systems normally used in four or six air skates, works powered by air bearings powered by compressed air which is griction free, easy movement of he
[Related Keywords : air casters, Air Bearing Casters, air moving skates, air rigging systems]
Business Type
Supplier
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
1 Set
Price:
US$ 200000
Place of origin:
Korea
Supply Ability:
1 set/4 month
- Heavy cutting and fast grinding work - High durability of the spindle adn sliding surface suitable for heavy cutting structure - Maximum convenience by adopting two door cover(Option) - Capacity : Swing in Splash guard 1,150mm, Working piece inlet diameter 1,000mm, Vertical range of wheel head 300mm - Magnetic Table : Loading weight of Table 500kg, Table diameter 800mm, Rotation 15(5~15) rpm -
[Related Keywords : Rotary surface grinders, rotary grinding machine, grinding machine, grinders]
Business Type
Supplier
Location
Daegu, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
·Model: 1107A ·Max Pipe Capacity:12" ·Height Adjustable Capacity:71-131 CM ·Max Load-bearing Weight:1130KGS ·Gross/Net Weight:14.3/13.3 KGS ·Packing Size:80*25*20 CM
[Related Keywords : pipe support, pipe fixture tool, steel pipe stander]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 100000 ~ 180000
Place of origin:
China
I. Main Parameters of Latest 6 axis CNC drilling EDM machine Model TD430N Worktable size φ200mm Table travel(X×Y*Z) 400×300*400mm W axis travel 400 mm B axis rotation Angle ±110° C axis rotation Angle 0-360° C axis rotation table load 20kg Max distance between worktable to electrode chuck 400mm Max workpiece dimension φ200×250mm Electrode diameter 0.3-3.0 mm Best roughness 1.6um Reca
[Related Keywords : CNC Drilling EDM Machine, CNC EDM Machines, wire EDM, sinker EDM]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
2 Set
Price:
US$ 5000 ~ 30000
Place of origin:
China
Detailed description I. Specification ModelTD703AD 1 Worktable Dimension 550×360㎜ 2 Travels X×Y×Z 350×250×（380+300）㎜ 3 Max Load on Work Table 350kg 4 Max Pressure of Working Water 14Mpa 5 Flume dimension 800*450mm 6 Max Work Current 30A 7 Electrode Diameter Ф0.15-Ф3mm 8 Max Process Deep 400mm 9 Max Processing Speed 30-60mm(Ф1.0) 10 Max Diameter to Deep Ratio ≥300 11 Workpiece
[Related Keywords : wire EDM, drilling EDM, milling tools, CNC EDM Machine]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
https://www.zoloformwork.com/bridge-formwork/form-traveller.html Form Traveller The form traveler is a load-bearing frame that moves by sliding or rolling along the top of the bridge deck. It is anchored and suspended on the completed beam section and is used for various operations, including formwork installation, reinforcement, placement of pre-stressed pipes, concrete pouring, pre-stress tensi
[Related Keywords : Form Traveler]
Business Type
Manufacturer
Location
Newfoundland, Australia
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 30000
Place of origin:
China
Three Axis Rigid Rail Vertical Machining Center Equipment advantages: 1、Three axle hard rail structure, good torsion resistance, good rigidity, bearing heavy load cutting. 2、High rigid body structure design ensures the high efficiency and strong cutting requirements of the machine tool. 3、Internationalized, high standard and fine sheet metal design of the outer cover ensure the sealing of t
[Related Keywords : Vertical Machining Center]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
100 Piece
Price:
US$ 30000
Place of origin:
China
Supply Ability:
10 sets per month
high precision. 2.The use of post-chip structure, clean up waste residue, easy to leak. 3.Three-axis full -stroke design, to ensure dynamic accuracy of the machine to improve life expectancy. 4.Withe the disc magazine, open the knife function, improve the tool change speed. 5.Integral molded castings provide a strong load-bearing capacity. 6.High-speed roller linear guide, fast, good rigidity.
[Related Keywords : Vertical Machining Center]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 100000 ~ 500000
Place of origin:
China
loading of the servo motor, there are the weight balance parts connected with the device of the steel electrode by a roller chain inside of the upright columns. The limited switches are installed on the device of the motorized electrode. And there is a traveling ruler near to the device for the operator to check the travel during working. 2、The system of working liquid The working liquid is ta
[Related Keywords : wire EDM drilling EDM, sinker EDM ECM, drilling tools, milling tools]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
CNC ControllerInstructionISO G codeMPG hand wheel4 axisSpindle motor1.5KW(2.2KW optional)Spindle speed100-3500r/min(24000r/min optional)The max moving speed8000mm/minThe max feeding speed4000mm/minPower of X/Y750WPower of Z1200WTransmissionball screwMax. load40kgTable structureFull cast ironPower230/120VWeight(NW/GW)500/550kgOverall dimension1360*990*1800mmPacking size1400*1050*2000mm
[Related Keywords : CNC Milling, China Micro CNC Mill, China CNC Mill]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
CNY 288000 ~ 990000
Place of origin:
China
Supply Ability:
15 Set/ Sets per Month
Load Capacity: 300Kg Spindle Face to Worktable Height: 170--590mm Positioning Accuracy: ±0.005/300mm Repeatability: ±0.003/300mm Tool Magazine Capacity: 24 Spindle Speed: 12000--40000Rpm Moving Speed: 15m--48m/min Cutting Speed: 10m--20m/min Tool Change Time: 2 seconds Machine Tool Dimensions: 2350*2300*2650mm Machine Tool Weight: 4000Kg Control Method: Fully closed--loop control Can it be cust
[Related Keywords : metal cutting machine, Graphite cnc, CNC Mill Graphite S-1100V, CNC Mill Graphite]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 100000 ~ 300000
Place of origin:
China
I. Main Specification Model TD406CNC Work table size 550×360mm Table travel(X×Y*Z) 400×300*370mm S axis travel 400 mm B axis rotation Angle ±90° C axis rotation Angle 0-360° C axis rotation table diameter 250mm C axis rotation table load ≤30kg Max distance between worktable to electrode chuck 400mm Electrode diameter 0.15-3.0 mm Electrode chuck Pneumatic spring chuck Max moving speed of s
[Related Keywords : wire EDM, drilling EDM, sinker EDM, CNC EDM Machine]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
load. (4) Sealing ring. The movable sealing elements of the chuck rotary hydraulic cylinder and the movable top hydraulic cylinder adopt the grid ring and the seal assembly. The dynamic and static sealing effects are good; the performance is good when there is lubrication and no lubrication; it has the characteristics of low friction resistance, simple groove structure, no creep phenomenon and no
[Related Keywords : new hydraulic chuck]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
CNY 288000 ~ 990000
Place of origin:
China
Supply Ability:
15 Set/ Sets per Month
Load Capacity: 200Kg Spindle Face to Worktable Height: 130--530mm Positioning Accuracy: ±0.005/300mm Repeatability: ±0.003/300mm Tool Magazine Capacity: 24 Spindle Speed: 12000--40000Rpm Moving Speed: 15m--48m/min Cutting Speed: 10m--20m/min Tool Change Time: 2 seconds Machine Tool Dimensions: 2100*2180*2450mm Machine Tool Weight: 3600Kg Control Method: Fully closed--loop control Can it be cust
[Related Keywords : CNC metal processing, CNC metal, CNC, CNC Mill Graphite]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
CNY 288000 ~ 990000
Place of origin:
China
Supply Ability:
15 Set/ Sets per Month
Load Capacity: 2000Kg Spindle Face to Worktable Height: 70--770mm Positioning Accuracy: ±0.005/300mm Repeatability: ±0.003/300mm Tool Magazine Capacity: 24 Spindle Speed: 12000--40000Rpm Moving Speed: 15m--48m/min Cutting Speed: 10m--20m/min Tool Change Time: 2 seconds Machine Tool Dimensions: 3500*7200*4250mm Machine Tool Weight: 20000Kg Control Method: Fully closed--loop control Can it be cus
[Related Keywords : CNC Router for Metal, CNC Router, CNC, cnc milling]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
CNY 288000 ~ 990000
Place of origin:
China
Supply Ability:
15 Set/ Sets per Month
Load Capacity: 800Kg Spindle Face to Worktable Height: 85--445mm Positioning Accuracy: ±0.005/300mm Repeatability: ±0.003/300mm Tool Magazine Capacity: 24 Spindle Speed: 12000--40000Rpm Moving Speed: 15m--48m/min Cutting Speed: 10m--20m/min Tool Change Time: 2 seconds Machine Tool Dimensions: 3000*2300*2600mm Machine Tool Weight: 5500Kg Control Method: Fully closed--loop control Can it be custo
[Related Keywords : Precision CNC Metal, CNC Metal Machining, CNC, CNC Metal]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Competitive loading products from various loading manufacturers and loading suppliers are listed above, please select quality and cheap items for you.
Besides, we also provide you with related products such as ramp, ladder, inspection, hydraulic, unloading and machine for your choice.
 |
Recommended Content
