Min. Order:
1 Unit
Price:
US$ 300
Place of origin:
China
Supply Ability:
3000units/thper mon
components 1 Year Core Components PLC, Pump, Compressor, Evaporator, Condenser Place of Origin Guangdong, China Weight 175 KG Warranty 1 Year Key Selling Points Excellent Cooling Condition New Type Air-cooled Brand Name xinbang Voltage 3PH-380V/50HZ (200V/220V/415V 50HZ/60HZ) Dimension(L*W*H) 1280x680x1225 mm Power 3750 Working Temperature Range 3°C ~ 50°C Cooling Capacity 12814 Kcal/h Compress
[Related Keywords : water cooled chiller, industry chiller, air cooled chiller]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1000 ~ 6000
Place of origin:
China
Supply Ability:
60 sets per month
Impeller is the key component of mechanical mixing equipment.In the mechanical engineering design of mixing equipment, the selection of the impeller type is very important.When selecting the type of the impeller,it is necessaryto make a comprehensive evaluation of the process,equipment,mixing requirements,economy,etc.and find out the main control factors of the operation,combine the performance c
[Related Keywords : impeller, agitator, direct agitator]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
world’s leading chain manufacturers. Induction tempering is widely employed in the automotive industry to temper surface-hardened components such as shafts, bars and joints. The process is also used in the tube and pipe industry to temper through-hardened workpieces. Induction tempering is sometimes performed in the hardening station, other times in one or several separate temper stations .
[Related Keywords : Induction Chain Hardening, Hardening Tempering]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
components and features of an industrial induction heater include: Power Supply: The induction heater is equipped with a high-frequency power supply that converts input electrical power into high-frequency alternating current (AC). The power supply can be designed for different power levels and frequency ranges, depending on the heating requirements. Induction Coil: The induction coil, also known
[Related Keywords : Induction Heater]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
https://www.ty-induction.com/recommend-products/induction-hardening-machine-manufacturers-china.html Induction Hardening Machine Manufacturer An induction hardening machine is a type of equipment used in the heat treatment process to enhance the hardness and durability of metal components. It employs the principle of electromagnetic induction to heat specific areas of a metal part, followed by ra
[Related Keywords : Hardening Machine]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
20 sets/month
Induction Annealing Machine Product Description Induction annealing is a process used to heat metal components using an electromagnetic field. An induction coil surrounds the metal, and an alternating current is passed through the coil. This creates an electromagnetic field that induces an electrical current in the metal component, which in turn generates heat. The metal is then heated to a speci
[Related Keywords : induction annealing machi]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
The H. F. Preheating process is widely applied for Thermo-set plastic molding such as for electric components, mechanical parts, melamine tablewares, and packaging of IC, transistors and other micro-electronic components, In the FRP pultruction and SMC/BMC molding process, H. F. Pre-heaters are also developingly used. Flat Electrode type A variety of electrode is available for rectangle preform a
[Related Keywords : preheater, pre-heater, preheating, phenoli]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 3850
Place of origin:
China
The device is mainly applied for the pre-heating processing for thermo-set resin material such as melamine, epoxy molding compound, bakelite and urea formaldehyde molding powder, etc., including preformed project such as compressed molding, transfer molding and extrusion molding, etc. The H. F. Preheating process is widely applied for Thermo-set plastic molding such as for electric components, me
[Related Keywords : high frequency preheater, RF preheater, radio frequency, preheater]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
The device is mainly applied for the pre-heating processing for thermo-set resin material such as melamine, epoxy molding compound, bakelite and urea formaldehyde molding powder, etc., including preformed project such as compressed molding, transfer molding and extrusion molding, etc. The H. F. Preheating process is widely applied for Thermo-set plastic molding such as for electric components, me
[Related Keywords : RF Preheaters, Preheating, Thermatrons, Molding]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
The H.F.Preheating process is widely applied for Thermo-set plastic molding such as for electric components, mechanical parts, melamine tablewares, and packaging of IC, transistors and other micro-electronic components, In the FRP pultruction and SMC/BMC molding process, H.F.Pre-heaters are also developingly used. (1)Roller Electrode typeThis type uses special rotating electrode, achieving highly
[Related Keywords : H.F Pre-Heater, Bakelite, Semiconductor, Molding Powder]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
The device is mainly applied for the pre-heating processing for thermo-set resin material such as melamine, epoxy, bakelite and urea plastic, etc., including preformed project such as compressed molding, transfer molding and extrusion molding, etc. The H. F. Preheating process is widely applied for Thermo-set plastic molding such as for electric components, mechanical parts, bakelite products, ur
[Related Keywords : Commutator Machinery, Bakelite, Phenolic Molding Compound, Epoxy Resin]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
The H. F. Preheating process is widely applied for Thermo-set plastic molding such as for electric components, mechanical parts, melamine tablewares, and packaging of IC, transistors and other micro-electronic components, In the FRP pultruction and SMC/BMC molding process, H. F. Pre-heaters are also developingly used. (1) Roller Electrode typeThis type uses special rotating electrode, achieving h
[Related Keywords : Preform Pre-Heater, Melamine, Urea Formaldehyde Plastics, Phenolic Molding Compound]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 30000
Place of origin:
China
component needle detection, pin shaft length detection, riveting, thrust detection, roller flexibility detection, roller parallelism detection, card assembly, laser engraving, product oil spraying, column assembly, column detection, and product cutting. The rocker arm is the valve distribution mechanism in the engine, responsible for opening and closing the valves. The camshaft drives the rocker
[Related Keywords : Automotive Rocker Arms, Automatic Assembly Line, Automated Assembly Line]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 30000
Place of origin:
China
Supply Ability:
30 set/month
Hongxin Torsion Spring Automatic Assembly Line Hongxin Torsion Spring Automatic Assembly LineOperation process: Torsion spring feeding → Torsion spring detection presence or absence → Torsion spring pressing in → Fixture cleaning → Contact support component feeding and contact support component presence or absence detection → Torsion spring pressing in → Torsion spring pressing in sh
[Related Keywords : Torsion Spring, Automatic Assembly Line, Automated Assembly Line, Torsion Spring Assembly]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
30 set/month
Hongxin Copper-Based Automatic Welding Machine Product Introduction: Application: for various kind of copper-based products assembly Operation process: static contact→ Copper Dot →visual inspection→welding Related parameters: Production effeciency: 30 pieces/Min, can replace 5 workers station Programmable logic controller (PLC) is OMRON brand + pneumatic components is SMC brand + vibratio
[Related Keywords : Copper Based, Automatic Welding Machine, Welding Machine]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
100 Set
Price:
US$ 300
Place of origin:
China
processes are in compliance with the ISO quality management system, all our production links are carefully controlled and monitored, and various inspections are performed to ensure the quality of the products.At the customer’s request, GreensTone always sources components/parts from suppliers recommended by the client. We do not replace components or use a supplier that is not approved by the c
[Related Keywords : printed circuit assembly]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
100 Set
Price:
US$ 300
Place of origin:
China
components, including inspection with spectrophotometers. Customers often rely on GreensTone’s expert engineering services, which provide design assistance as well as quality oversight. From molding structure, plastic material selection to detailed processes, the GreensTone team works to ensure our plastic molded parts provide reliable performance in the final application. If you are looking fo
[Related Keywords : Box Build Assembly]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
1.Widely used at cabinets/electrical panel,lighting, auto parts,electronics,fileter, battery... 2.The glue strip has the function of sealing, anti-seismic, shock absorption, waterproof and dustproof. 3.Beckhoff system has the function of remote monitor and service function. 4.The two components materials weight mixing ratio error is ± 0.3%. 5.The processing speed can be up to 6 ~ 30 m / min depe
[Related Keywords : Gasket Sealing Equipment]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
1.Widely used at cabinets/electrical panel,lighting, auto parts,electronics,fileter, battery... 2.The glue strip has the function of sealing, anti-seismic, shock absorption, waterproof and dustproof. 3.Beckhoff system has the function of remote monitor and service function. 4.The two components materials weight mixing ratio error is ± 0.3%. 5.The processing speed can be up to 6 ~ 30 m / min depe
[Related Keywords : Spreading Machine for Sealing]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
Supply Ability:
10 sets per month
1.Widely used at cabinets/electrical panel,lighting, auto parts,electronics,fileter, battery... 2.The glue strip has the function of sealing, anti-seismic, shock absorption, waterproof and dustproof. 3.Beckhoff system has the function of remote monitor and service function. 4.The two components materials weight mixing ratio error is ± 0.3%. 5.The processing speed can be up to 6 ~ 30 m / min depe
[Related Keywords : PU sealing equipment]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Competitive components processing products from various components processing manufacturers and components processing suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
