Min. Order:
500pcs
Place of origin:
China
Supply Ability:
120000/month
according to our clients? order?s request CFZA (Fused Zirconia-alumina) Bore Density (PPI) 8----20 Porosity (%) 80---90 Max. Factory Tem. (=c) 1250 Bending Strength (Mpa)(Normal Tem.) 0.6 Compression Strengh(Mpa)( Normal Tem.) 0.8 Thermal Shock Resistance(time/1100=c) 6 Suitable for aluminum alloy casting and other non-ferrous Casting We are changeable according to our clients? order?s request
[Related Keywords : ceramic foam filter, ceramic filter, filter, casting filter]
Business Type
Manufacturer
Location
Chongqing, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
fuse and achieve a seamless bond. Unlike brazing, which uses a solder as an intermediate medium to fuse the two alloys, brazing makes it difficult to achieve a complete connection. This leads to insufficient strength, and under the immense pressure and high temperature inside the gun body, uneven heat conduction and cracking can easily occur. F4 Plasma Power Generation Electrode Models Part Model
[Related Keywords : f4 plasma spray, anode]
Business Type
Manufacturer
Location
湖南, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Fuse, Power input. SPECIFICATIONS 3-20LPM oxygen generator Model Unit QJ-OX3L QJ-OX5L QJ-OX10L QJ-OX15L QJ-OX20L Oxygen flow rate LPM 3 5 10 15 20 Oxygen purity % 92+-3 Dimension cm 55*40*73 55*40*80 55*40*116 55*45*135 55*45*135 Output oxygen pressure Mpa (Bar) 0.1(1) Voltage V 220/110 Air Input / Inner air compressor Inner air compressor Inner air compressor External air compressor External air
[Related Keywords : Oxygen Generator]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Piece
Price:
US$ 409
Place of origin:
China
If output current exceeds its rated value,the controller will stop its output to protect itself and the load. Restorable Short Circuit Protection: If output of the controller isshort-circuited, the controller will shut down its output to protect itselload. But the fuse inside will not be blown So when there is no short circuit at the outputside, the controller will work again after power on.
[Related Keywords : feeder, controller, Vibratory Feeder]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Place of origin:
China
fuse the pieces of foam together. The EPE foam bonding machine typically consists of a heating element and a set of pressing plates. The foam pieces are placed between the pressing plates, and the heating element is activated to heat the foam to a temperature at which it becomes pliable. The pressing plates are then closed, applying pressure to the foam and causing it to bond together. EPE Foam S
[Related Keywords : Thickening Machine]
Business Type
Supplier
Location
Guangdong, China
Employees Total
1 - 5
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Supply Ability:
100000/month
fuses and other structures. 3. Property, application and life of heat pipe: Heat pipe is made by placing heating elements in a metal tube and filling crystalline magnesium oxide powder with good heat resistance, thermal conductivity and insulating in the gap closely and then managed by other treatments. Heat pipe is heating element designed specially to convert electrical energy into heat energy.
[Related Keywords : Cartridge Heater, Heater, Mold Heating, Heating Element]
Business Type
Manufacturer
Location
Shanghai, Hong Kong
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
4 Barrel
Price:
US$ 585
Place of origin:
China
Fused output ? 15-60 V DC input Note: Supporting this terminal component and the configuration options described on page 6 of new fault protection requires firmware version 1.40N or later Redundant operation fault detection ? Output contact monitor reads back and detects high coverage faults in internal FBM, allowing redundant partners to automatically continue driving discrete output
[Related Keywords : PFSK160A 3BSE009514R1]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Piece
Price:
US$ 10
Place of origin:
China
Fused Deposition Modeling (FDM):production-quality ABS, ABS-M30 Polycarbonate PC-ABS PC-ISOULTEM, & PPSF +/- 0.002"Short run production (Silicone Mould /vacuum casting): ABS,PP,PC,PMMA,POM,Nylon ,PU and so on+/- 0.003" Metal prototypes (CNC,EDM,Drilling, Milling):Aluminum, Stainless Steel, Carbon Steel, 17-7 PH, Brass, Phosphor Bronze, Copper, Nickel Alloys, Beryllium Copper,etc+/-0.002"Sheet met
[Related Keywords : CNC Machining parts, sheet metal parts, Rapid Prototype, auto machining parts]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1 ~ 2
Place of origin:
United States
fuse together at the molecular level. The result is a seamless and strong joint that retains the original properties of the metal wires without the need for additional materials such as solder or adhesives. Cold welding is commonly used in industries such as electronics, jewelry making, and wire manufacturing, where precision and reliability are paramount. Wire cold welders come in various sizes
[Related Keywords : Wire Cold Welder]
Business Type
Manufacturer
Location
Shanghai, Hong Kong
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Case
Price:
US$ 60
Place of origin:
China
USE: Medical/Dental/Household/Laboratory/Beauty FEATURE: 1.Have an ON/OFF switch button, no need unplug the power code for stop the machine, easy and safety. 2.Have an Fuse Holder with 2XF10A, it will be safety when short-ciruirt.comply with the European Electrical Safety Standard. 3.Have an Manual-type 110 degree Thermostat from USA Emerson Electric Co.this kind of thermostat are precisely t
[Related Keywords : Distilled Water]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Blade
Price:
US$ 1000
Place of origin:
China
Dry cabinet for electronic components are: wire, ceramic capacitor, connector, relay, safety capacitor, circuit board, secondary wafer, tertiary wafer, fusible wire, circuit breaker, fuse, resistor, capacitor, coil, etc These dry boxes for electronic components are easy to absorb the humidity, especially in the relative humidity of 60%RH above, Due to the poor storage environment, various accesso
[Related Keywords : room thermometer hygr]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
10 Kilogram
Price:
US$ 260
Place of origin:
China
Supply Ability:
99999
Mokume Gane (Mow-koo-may Gone-ay) is a laminated metal made from non-ferrous metals (without iron). It is laminated together by a high temperature and high pressure process in which the layers fuse together. Bar and slab are processed by twisting, straightening, cutting, polishing and other processes. Under carefully controlled conditions, the combination of heat, pressure and protective atmosphe
[Related Keywords : Mokume Gane]
Business Type
Manufacturer
Location
山西, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
2000
fuses, making them the best choice for SPD backup protection. The SCB (SSD) is connected in series on the SPD circuit and has the ability to resist high surges. The T1 level can reach up to 25KA (10/350μs), and the residual voltage is low. The surge protector main breaker can intelligently identify lightning current and power frequency current. When the power distribution system fails, it can tr
[Related Keywords : spd circuit breaker]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
India
Spiral wound cylindrical Brush is applied wherever a continuous and wide face brushing is required. It is manufactured by winding strip brush onto a shaft or core, which is made up of stainless steel, galvanised Iron, or zinc steel backing. It is also made by fusing a strip brush and creating into a one piece fused spiral wound cylinder brush. Fill materials include Wire, Synthetic and Natural fi
[Related Keywords : Spiral Cylinder Brush]
Business Type
Manufacturer
Location
Delhi, India
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
2 Roll
Price:
US$ 2
Place of origin:
China
Supply Ability:
6000000000000 rolls
Features: 1. Lightweight and energy efficiency for economical operation 2. Outstanding temperature resistance (-170oC + 260oC) 3. Controlled porosity 4. Superior non-stick surface, easy to clean 5. Exceptional strength and dimensional stability 6. Superior tracking Our fusing machine belt features: 1. High temperature resistance and adherence resistance; 2. Good tensile strength, preventing def
[Related Keywords : teflon fabric, teflon tape, tape]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1000 Piece
Price:
US$ 1
Place of origin:
China
Supply Ability:
15 Million Meters
Sucker Rod Coupling Class T Our company produced Class T Coupling ,sub coupling and spray coupling , they are design according to API Spec 11 B standard.Using the high quality carbon steel or alloy steel (the equivalent of AISI 1045 and AISI 4135) and plating metal is a kind of surface hardening technology, is the nickel, chromium, boron and silicon powder coated on the substrate metal and fused
[Related Keywords : Sucker Rod Coupling, spray coupling, Class T Coupling]
Business Type
Manufacturer
Location
Neimengguzizhiqu, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 100
Place of origin:
China
when temperature overshoot. 3. The temperature has reached the timing and shutdown alarm function. 4. Leakage protection function. 5. Vacuum pump overcurrent protection 6. Heater mechanical protection 7. Temperature sensor disconnection alarm function 7. No fuse control loop protection switch. As one of test chamber manufacturers , we will do our best to meet all the needs of customers.
[Related Keywords : Laboratory industrial]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
Less than USD 100,000
fuse (500) Indication lamp: Main power, stop, starting, high temperature, preheating, automatic, manual, low oil pressure, over speed, starting fail, Control parts: MC, HTR, ECU, ABC Others: Lamp test, buzzer 3. Structure Size: 500mm x 300mm x 250mm(width, length, height) Color: Front: Red color Cover: 2.5y 7/2 4. Feature Controls engine stop, oil pressure, over speed, over temperature Controls
[Related Keywords : engine control panel]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Piece
Price:
US$ 1250
Place of origin:
United States
Supply Ability:
50
fuse 180512 NOV 206256+71 THYRISTOR, 200 to 480 VAC, 25A 20042934 OBS, REPLACED BY 206256+71 NOV 20042966+74 COIL, LOW CONSUMPTION 24VDC, 18AMP AC3 20042966 OBS, REPLACED BY 20042966+74 NOV 20043551+74 RELAY, NET MONITORING, 3~ 208-480VAC 20043551 OBS, REPLACED BY 20043551+74 NOV C.103260+74 RELAY, 24VDC COIL, PLC-RSC-24DC/21-21 C.103260 OBS, REPLACED BY C.103260+74 NOV 20043565+74 HEATER TEMP
[Related Keywords : VARCO 122627-46]
Business Type
Supplier
Location
Texas, United States
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 18000
Place of origin:
China
Supply Ability:
100 Set/ Sets per Month
fuse specification: 10AAir pump5.5-9KW, frequency conversion control standard configurationCon.A: 4 axis, Oscillating knife + pen Con.B: 4 axis, Oscillating knife+ (synchronous rotation) presser+ pen Con.C: 6 axis, Oscillating knife + V cut + independent presser +pen + half cut head Con.D: 7 axis,Oscillating knife + V cut and independent presser + spindle + pen + half-cutting head)(The actual cut
[Related Keywords : Cutting Machine, Oscillating cutter, Gasket cutter, cutter]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Competitive fuse. products from various fuse. manufacturers and fuse. suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
