Place of origin:
Korea
sensors check the height variation of the joints to be welded and the vision sensors check the width variation of the joints to be welded and all of these measurements are displayed on the machine's Vision Scanning Monitor. The machine will not weld if the tolerances exceed the maximum allowable. If the tank assemblies are loaded onto the machine without the end caps having been spot welded to th
[Related Keywords : Welding machine, Stainless steel tank welding, Brazing amchine, Vision welding machine]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
loading valve (φ65mm) and manually 3-way valve (φ65mm) ,with top and bottom level senor B. Heating system: disconnecting valve、pressure regulator valve 、pneumatic disconnecting valve、heating coil(φ25mm pipe)、bleeder C. Temperature controlling system: temperature sensor and temperature controlling unit. D．Pneumatic system: pneumatic valve and pneumatic control system. E．Impeller pum
[Related Keywords : Dissolving System]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
Korea
sensor inputs of voltage, electric current, resistance, PNP, and NPN. Possible to print the sensor data measured independently on the Manual Mode into graphic LCD of the DAQ Controller The operation program is composed of a Lab VIEW application S/W making it possible to save the data and provide PDF files of sensor theories and practical training results. All kinds of sensors, signal conversion
[Related Keywords : Robotics, Sensor Trainer, Electronics, Trainer]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 68
Place of origin:
China
Introduction NT6800WNR has 6 relays, 8 isolated input. Communicate by rj45 network or Wi-Fi, supports Modbus-TCP. ( NT6800WNDSR: with one DS18B20 temperature sensor in addition ) It can be controlled by PLC / computer / android, suitable for industrial automation, data acquisition systems, environmental monitoring and local control of an electrical and non-electrical parameter, building automatio
Business Type
Supplier
Location
Zhejiang, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 500000 ~ 600000
Place of origin:
China
Supply Ability:
2LINES PER MONTH
sensor and so on,to achieve a series of auto working procedure,for instance to welding cell,auto set type,auto loading of the glass,auto soldering stringer and bussing,auto cut and lay of EVA,auto lamination,trimming deflashing,auto framing with gluing,curing,auto testing. Module type: 156*60, 156*72,glass-backsheet solar panel,it can to use 5BB,6BB is upgraded with charge. Module size: Length 15
[Related Keywords : solar panel assembly line, PV module machines, solar panel machines]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
50 Combo
Price:
US$ 100
Place of origin:
China
AG-27 series magnetic sensor The AG-27 series is suitable for all 4φC-slot cylinders on the market. The unique rotor screw enhances the tightness of the combination with the cylinder, and can withstand 5kgF tension without loosening; the installation method directly placed above the groove can be used. saves a lot of loading and unloading time. Specification of AG-27 Magnetic Cylinder Sensor Mod
[Related Keywords : sensor cylinder]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 100000000
Place of origin:
China
Supply Ability:
10000 Sets/Year
loaded at one time, and the plate end pre-bending and the roll forming of the workpiece can be completed without turning the head. - NC control, the upper roller lifting and lowering adopts displacement sensor detection, LED display can directly observe the working displacement of the upper roller. - All work rolls are forged from high-quality steel and are heat treated and induction hardened. -
[Related Keywords : second hand hydraulic]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
100 Set
Price:
US$ 100
Place of origin:
China
sensor. Precision control speed, high performance, and high and low-speed performance. Thrust can be maintained at any position. High dynamic response time, and high acceleration. High rigidity and impact resistance. Super long service life, easy operation and maintenance, and low noise. Low maintenance cost. In the complex environment, the servo electric cylinder only needs regular grease lubric
[Related Keywords : TYD TURN-BACK SERIES SERV]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 100000
Place of origin:
China
load 1000kg, 7×24h full time running. Intelligent, safe, easy to operate: Comprehensive self-detection capability. Safe sensors + dual control system protection, 360°anti-collision, Light&Sound alarm protects. Sustainable iteration, remote upgrading, friendly HMI. MW-T10 automated pallet truck is mainly used for horizontal handling and cargo handling in warehouses and workshops, with a rated lo
[Related Keywords : robotic pallet jack]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Video
Min. Order:
1 Set
Price:
US$ 16000 ~ 21000
Place of origin:
China
Supply Ability:
10
sensor Multiple R angles formed SPECIFICATIONS Model : WB-2D208 Hard Wire (MM) : 3.0-4.5 Soft Wire(MM) : 3.0-8.0 Axis : 2 Bending Motor : 2KW Wire Feeding Motor : 3.5 Air Compressor : 5-6kg/cm Dimension : 2.3*1.1*1.3 Weight : 1200kg FAQ Q:What information should customer provide to get wire bending machine offer from Autolink? A: Please you usually share below info to check suitable machine. *
[Related Keywords : Wire Bending Machine, CNC Machines, Bending Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 10000 ~ 50000
Place of origin:
China
sensors to protect the machine against over loading and jamming. Double Shaft Shredder Technical data: Model D2840 D2860 D2880 D3260 D3280 Overal Size (mm) 1590x1060x1850 2560x1060x1850 2820x1060x1850 2658x1366x1911 2930x1385x1927 Cutting Chamber size (mm) 400x470 600x480 800x480 610x580 890x580 Rotor Blade Diameter (mm) Φ280 Φ280 Φ280 Φ320 Φ320 Rotor Ratate Speed (r/min) 14.2
[Related Keywords : double shaft shredder, two rotor crusher, wood shredder, tire shredder]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
1 - 5
Annual Revenue
Less than USD 100,000
Competitive load sensors products from various load sensors manufacturers and load sensors suppliers are listed above, please select quality and cheap items for you.
Besides, we also provide you with related products such as load transducer, load cell for your choice.
 |
Recommended Content
