Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
system ( so that it will not need a water source), a flexible heating cable for different sizes/shapes workpieces, and exact control of the preheat temperature for welding and the heating time. Hence, the induction heating equipment produced by JKZ Electronic is a very suitable heating power source in the pre-weld heat treatment process, especially for oil/gas pipes welding, chemical tank repair
[Related Keywords : induction heating power s]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 155
Place of origin:
China
Product description USBCAN-II Pro adapter is a debug or analysis tool with two CAN-Bus channel.Using this adapter,PC can quickly connect to CAN-Bus network through USB interface,and become a intelligent node of CAN-Bus to transmit/receive CAN-Bus data. A dapter comes with isolation,and can be used in different windows systems.Device driver,software and programming interfaces(VC,VB,Net,Delphi,Labv
[Related Keywords : industrial control, can bus adapter, dupline profibus]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
system and other modules in the secondary or backup system. The main module controls all the remote I/O operations. The secondary module is available to take over the control if something goes wrong on the primary module. The backup scanner has the ability to switch between 2 communication channels. The first channel can be configured as RIO or DH +. The second channel is used to replace the RS-2
[Related Keywords : servo drive]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
product formed by adopting the most advanced power electronic power devices and unique converter control technology in the world with reasonable structure design. 1.This equipment uses the digital signal processing (DSP) digital real-time high-speed signal processor and DDS (Direct Digital Synthesizer) direct digital frequency synthesizer. Infieneon IGBT type. 2. Using advanced digital control te
[Related Keywords : Industrial Induction Heat]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
controlled pattern characteristics. Dolphmicrowave ESA's provide maximum durability with minimal maintenance. The hot-dipped galvanized steel ground mount assembly ensures extended product life. Galvanized and stainless steel hardware maximize corrosion resistance. For cost-effective system expansion, available modular equipment options include anti-icing equipment and pressurization systems. Mic
[Related Keywords : Earth Station Antenna]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Place of origin:
Korea
Price Condition:
FOB
product as an integral type, it can be used as a wall-hanging type in the narrow space. Slim&stylish design has been applied so that it can be installed easily and simply anywhere such like sink, shelf etc. Fully automated system As a digital control system for users, easy to operate. All the work from the selection of concentration up to the flow rate adjustment can be conveniently proceeded at
[Related Keywords : Sterilized Water Manufacturing, Sterilized Water, Water Manufacturing]
Business Type
Manufacturer
Location
Incheon, Korea
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
100 Kilogram
Price:
US$ 22~25
Place of origin:
China
Supply Ability:
200kg
systems .In nuclear power plants, it is used in steam generator pipelines.This alloy is commonly used in the electric thermal element sheath of household appliances.In pulp production, the liquid heater is usually made of alloy 800.In oil processing, alloys are used as heat exchangers for the air cooling process flow。Why choose us?Engaged in import and export trade for twenty yearsProducts are
[Related Keywords : Nickel Alloy Plate, Nickel Alloy Sheet, Monel 400, Nickel Alloy]
Business Type
Manufacturer
Location
辽宁, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 8950
Place of origin:
China
control system: 7-inch touch screen + Panasonic PLC. The dust blower, dust vibration and total test time can be controlled separately. This controller has the following various arbitrary setting control functions:1. Dust blowing time (stop, blowing): can arbitrarily choose any of continuous and periodic dust blowing time to setting;2. Vibration time: vibration and stop vibration time are automati
[Related Keywords : Dustproof Testing Machine]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
Production Line of Diamond Tools•Other Products Meanwhile, SHMOUNTAIN undertakes the customization of various kinds of non-standard equipment. In the business philosophy of Quality First, Customer Supreme, SHMOUNTAIN constantly introduces advanced technologies and production management philosophy at home and abroad by virtue of exquisite technologies in the automation field of diamond tools, an
[Related Keywords : diamond tools equipment, machine of diamond tools, diamond tools braze equipment, welding M/C diamond tool]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
overseas friends to visit. Angle steel round rolling machine is a small machine, the weight is 350, and the dimension of angle steel round rolling machine is: length is: 760mm, width is: 780mm and height are: 1150mm, so this machine can move to anywhere easy. Angle Steel Round Rolling Machine Basic Configuration: One motor One electronic box One control electric system One set mold One cylinder
[Related Keywords : angle shearing machine]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
Above 1000
Annual Revenue
USD 5,000,001 - 10,000,0000
Video
Min. Order:
1 Unit
Price:
US$ 6000 ~ 10000
Place of origin:
China
Supply Ability:
100 units per month
controlled according to the theoretical calculation which ensures the physical and chemical index of the of final starch after drying. 2.The parts in contact with material of this cassava starch drying machine is made of stainless steel which ensures high standards of final product. 3.The negative press in the whole system effectively controls the loss of starch and purifies the working enviro
[Related Keywords : cassava processing machin, flour drying machine, cassava machine]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
products such as iron and steel smelting, electric power production, and ocean purification, etc. to domestic drinking water treatment, domestic garbage utilization, automobile burning filtration, bicycle lubricating oil filtration, etc. Therefore, cartridge filter elements are used in clean technologies in our lives. The hydraulic system is divided into an oil suction filter, pipeline filter, a
[Related Keywords : Filter Cartridge For Sale]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Place of origin:
China
Production Description YS-350A/450A Automatic Die Cutting Label Machine Additional functions: 1. hot stamping 2.hole punching 3.lamination Standard functions: unwinding-die cutting-waste discharging-cutting into pieces-rewinding The paper adhesive label, nylon membrane trademark and the radium anti-fake trademark.this machine is matching with different printing machine and slitting machine, such
[Related Keywords : Label Die Cutting Machine]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
product form to ensure product quality. The vacuum negative pressure system can ensure low water content, fast forming, and short drying time (or no drying). EPS Foam Shape Molding Machine Features By steam heating and air cooling, the eps foam bead becomes a large foam board. The PLC English touch screen is adopted to realize the fully automatic production of various shapes of foam boxes for fee
[Related Keywords : EPS Shape Molding Machine]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 9999 ~ 10000
Place of origin:
China
Supply Ability:
20 sets per month
product. Suitable for high temperature, high solids, high viscosity, and other difficult working conditions. This equipment is closed design, can be used with a vacuum system to realize vacuum mixing. Mixing tank can be designed with a heating jacket, matching mold temperature controller, to realize thermostatic mixing function. It's the first choice of dispersing and mixing equipment for the
[Related Keywords : planetary mixer machine, sealant mixing machine, silicone sealant mixing machine, planetary mixing machine]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
production of drugs, spices, dyes and other organic crystal substances.Corresponding enterprises (pharmaceutical related enterprises, chemical enterprises) 2.Universities and Research Institutes (chemical and pharmaceutical related schools and research institutes) 3.Government supervision departments (Entry-Exit Inspection and Quarantine Food and Drug Administration, Grain Administration, etc.) 5
[Related Keywords : Melting Point Meter]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for 18 Years Factory China GM Type Low Speed High Torque Sai Radial Piston Saw Crane Hydraulic Motor for Winch, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact u
[Related Keywords : Radial Piston Motor]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
system to solve the heat problem of spindle. 5, Automatic feeding and unloading device can be selected to achieve higher automation production, improve productivity, greatly reduce production costs and professional and technical requirements for operators. 6, Wet-cut cooling or air-cooled Micro-lubrication cooling can be selected to meet the requirements of various processing schemes of users. 7,
[Related Keywords : 6-Hobbing Machine, gear hobbing machine, gear cutting machine, spline milling machine]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1set
Place of origin:
China
Price Condition:
FOB Tianjin or others
Supply Ability:
250sets/year
system makes the quality stable and even-distribution. Also the advantages including: heat receiving is even, production rate is high, easy-stripping. 2.Heat recycling is the principle of the oven let the temperature inside the oven even. The insulation is well by good heat insulation material. In order to raise the heat efficiency, the auto-temperature control system alone with the control switc
[Related Keywords : PVC Production Line, glove making machine, Gloves Equipment]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Box
Price:
US$ 1
Place of origin:
China
https://www.udomachinery.com/txe-series-embedded-truck-washing-system/txe-series-embedded-truck-washing-system.html Product Introduction TXE Embedded Truck Washing System is specially developed by UDO for compact batching plants. The system adopts a gantry structure and is installed at the entrance of the unloading port without occupying additional space in the plant. The side of the system adop
[Related Keywords : Concrete Truck Wash]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Competitive production control system products from various production control system manufacturers and production control system suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
