Rotate Wholesale

Gas Cylinder Shot Blasting Machine

• Min. Order:  

  100 Unit

• Price:  

  US$ 7000

• Place of origin:  

  China

Gas cylinder shot blasting machine is used to automatically clean the surface of the cylinders by blasting of the abrasive coming from the blast turbines of the machine in a confined chamber. The cylinders get shot blasted as they pass through the blasting chamber on the base of the machine. The cylinders also get rotated on the rollers as they pass through to ensure the cleaning of the complete

[Related Keywords : shot blasting machine]

Crusher XKP-450/560ZG-B, XKP-400

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

rotating joint, water cooling (11) roll space adjust: manual adjusting, the roll space range:0.2~10mm (12) electric appliance: DELIXI (13) safety device: hydraulic braking, four emergency stop button, roll rotating is not more than 1/4 circuit when emergency stop and reverse 1/4 circle. (14) reducer and roll is connected directly by coupling or universal shaft. (15) weight：~12.5ton (16)ov

[Related Keywords : grinding mill, rubber machinery, equipment]

Hydraulic Liner Hanger Polished Bore Receptacle

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

Hydraulic Polished Bore Receptacle Liner Hanger Mated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The polished bore receptacle (PRB) is a highly machined component with a polished bore. Features of Hydraulic Liner Hanger Polished Bore Receptacle High quality surface finish on the inner seal bore for optimum sealing property. The top end is ch

[Related Keywords : Non-rotating stabilizer]

Coil Upender

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

Rotation of turntable is driven by deceleration motor with brake device and chain transmission pair, so as to realize positive and negative rotation, start smoothly and achieve the purpose of turning over. Setting a plane and a plane plus V plane on the turning table can meet the requirements of different states of the coil. Operational Instructions of Coil Upender Machine Switch power supply. Tu

[Related Keywords : Coil Upender]

Bearing Heater Flywheel Ring Gear Induction Heater Shrink Fitting Interference Fit Blind Hole Rotor

• Min. Order:  

  1 Set

• Price:  

  USD 1000

• Place of origin:  

  China

• Price Condition:  

  FOB Negotiable

• Supply Ability:  

  1000sets/month

Portable Bearing Heater Induction Heating Machine for Flywheel Ring Gear Heater/ Motor case of Blind hole/Through Hole/Shrink Fitting Interference fit Assembly OLB Series Industrial induction Intelligent Bearing Heater is a strong driving force, microprocessor-controlled electric induction heater, with an axis of rotation around the heating rod, the design is consistent with the principles of erg

[Related Keywords : through hole, Motor stretching Aluminium frame, wound stator core, die-casting aluminium]

Cutting Master

• Min. Order:  

  1 Unit

• Price:  

  US$ 70000

• Place of origin:  

  Korea

• Supply Ability:  

  150 ea per month

priceDust collector (option)+additional priceFast Speed, Simple operation, trustful after service and the best CNC satisfactions for you. Specifications are: SPINDLE HSD 7.5KW CONTROLLER 3D CNC MAX.ROTATION Q-TY 24000 RPM MOTOR 750W AC SERVO MOTOR TOOL TYPE ISO 30 VACUUM BUSCH R5 (9.2kW) TOOL CHANGE POCKET TYPE (5EA) POWER 380V 3P / 60Hz or 50Hz MAX.SPEED 50000 MM/MIN CUTSIZE X5000 Y1620 Z200

[Related Keywords : Cutting Machine, Industrial Machinery, Industrial Equipment, RIVET MACHINE]

Particle Analyzing Instrument(Testing Sieve,Vibro Sieve)

This instrument is mainly applicable for sampling powder materials in lab.Features: 1. 0-30 minute time replay can be adjusted to get your analysis result; 2. Frequency of 1500 vibrations per minute makes material pass through the meshes more easily; 3. Two rotational speeds for different materials; 4. The clamp is easy to adjust. It is easy to install and remove mesh frames; 5. Rubber sprin

[Related Keywords : Testing Sieve, Particle Analyzing Instrument]

RDF Pellet Machine MSW Pellet Mill Plant Production Line

• Place of origin:  

  China

rotational speed of feeder shaft. Then the material passes the safety magnet for removing the metal impurities, then it passes the feed chute and finally enters the pellet chamber for pelleting. According to our experiences on RDF Pellet Projects, it is recommended to make Diameter 28MM Pellets. Technical data: Pellet mill typeSPM800Ring dieInside diameter mm800Capacity T/H2~2.5RollerQuantity2Di

[Related Keywords : rdf pellet mill, msw pellet mill, pellet machine, pellet plant]

Water Tank Vision and Welding Machine

• Place of origin:  

  Korea

rotate the assemblies to perform this task prior to visioning. The spot welding of the tank body to the end caps prior to final welding is a critical requirement in order to minimize heat deformation during the final weld process. Once visioning of the spot welded assemblies is completed and there is confirmation that the tolerances are within acceptable limits, the machine will then proceed with

[Related Keywords : Welding machine, Stainless steel tank welding, Brazing amchine, Vision welding machine]

3D CNC Wire Bending Machine WB-3D410R

• Min. Order:  

  1 Set

• Price:  

  US$ 43650 ~ 46350

• Place of origin:  

  China

Autolink Technology Co., Ltd is offering two models of CNC wire bending machines. These two models serve various industrial needs. In our machine, the wire takes directly from the coil, straightens it, bends it, and, then cuts it. The in-built CNC programming unit assures for all the processes to produce the output.The CNC wire bending machine’s rotating head does not rotate the thread to suppo

[Related Keywords : Wire Bending Machine, CNC Wire bending, 3 Axis bending cnc]

Blown (Inflation) Film M.F.G Line

• Place of origin:  

  Korea

layers to meet their required properties. Our multi-layer line is right for high productivity and quality it’s essential for these markets. Depending on application and system of extrusion, It’s recomme- nded two selections of Die rotating unit or Nip roll oscillating unit and three selections of winding system, Turret Touch & Gap Winder, Surface Touch Winder, Shaft Roll Winder.

[Related Keywords : masking tape making machine, Film M.F.G Line]

Induction Bearing Heater Flywheel Ring Gear Roller Heater Shrink Fitting Interference Fit Blind Hole

• Min. Order:  

  1 Set

• Price:  

  US$ 500

• Place of origin:  

  China

• Price Condition:  

  FOB Negotiable

• Supply Ability:  

  1000sets/month

Portable Bearing Heater Induction Heating Machine for Flywheel Ring Gear Heater/ Motor case of Blind hole/Through Hole/Shrink Fitting Interference fit Assembly Series Industrial induction Intelligent Bearing Heater is a strong driving force, microprocessor-controlled electric induction heater, with an axis of rotation around the heating rod, the design is consistent with the principles of ergono

[Related Keywords : bearing induction heater, motor aluminium shell housing, induction heater factory manufacturer, crankshaft axis stator winding]

Medium-speed Granulator

• Min. Order:  

  1 set

• Place of origin:  

  China

• Price Condition:  

  FOB ningbo

rotation knife design adopting shear principle,made of high contented chromium steel,shred the various plastic easily. 4.The gap between fixed blades and roating blades is adjustable,the knives can be dismounted when unsharped,to be used repeatedly,long time working life. 5.Weigh-loading bearings and dust- protection device, the noise-proof board can prevent vibration and noise effectively. 6.T

[Related Keywords : middle speed granulator, plastic crusher, granulators, plastic machine]

Automatically Interchangeable Steel Forming Machine

• Place of origin:  

  China

• Supply Ability:  

  40 sets/month

rotate, re-tighten the screws. Nothing need to be removed or changed. It is simple and quick. The whole line adopted automatic controlling system which controls cutting equipment and roll forming processing according to operator's order on the PLC, such as length, quantity etc. This line roll forming speed can reach 8-15m/min. B. Technical parameters: 1. Material thickness: 1.2-2.5mm steel strip,

[Related Keywords : Steel Roll Forming Machine]

Exhaust Fan's Temperature Variable- Frequency Governor

• Place of origin:  

  China

• Price Condition:  

  FOB

Yuyun Sanhe Exhaust Fan’s Temperature Variable-frequency Governor keyword： Features: 1). This Governor can automatically change fans’ rotational speed to achieve the adjustment of air speed and air volume according to the house temperature. 2). By automatically adjust the exhaust fans’ air speed and air volume, This Governor can keep the house at a stable temperature,Which a

[Related Keywords : Variable-frequency governor]

Hookah Cutter, Shisha Cutter, Tobacco Cutter

• Min. Order:  

  1

• Place of origin:  

  Poland

• Price Condition:  

  FOB

We offer machine to CUT TOBACCO FOR HOOKAH, SHISHA SC200 !!! Machine cut tobacco leaves into squares. It is designed for making chewing tobacco, shisha tobacco, hookah tobacco. It is very simple to use. Machine is equipped in 6 knives: 4 rotate and 2 fix. It has special nets with different size of holes. It allows to achieve different size of final product. In kit with machine there is 3 nets siz

[Related Keywords : hookah, shisha, cutter, tobacco]

Vessel Jetty Collision Alarm System

• Place of origin:  

  Korea

Vessel jetty Collision Alarm System ASK_CAS is collision alarm system between vessel and jetty which is communicated by IoT blutooth 5 mesh. That system is installed on jetty where hazardous material is treated and over 5o,ooo dwt vessel docked. The datum are collision by vibration sensor and position by terrestrial magnetism sensor and inclination and rotation by gyro sensor. All datum is displa

[Related Keywords : Collision alarm system, Jetty]

Decanter Centrifuge

• Min. Order:  

  1 unit

• Place of origin:  

  China

• Price Condition:  

  FOB Shanghai

• Supply Ability:  

  50 units/month

rotation rate detection over, vibration protection, motor overload and overheat protection, protection for scroll when zero differential speed occurs. 6. For the highly sticky materials, it can add the hydraulic differential gear to stabilize. models Basket Dia (mm) Length-Diameter Ratio Rotation rate of basket (r/min) Relative Centrifugal force Power of motor (w) Weight (kg) Overall Dimensions (

[Related Keywords : centrifuge, sludge centrifuge, decanter centrifuge, decanter]

Metal Spinning

• Min. Order:  

  100 Piece

• Price:  

  US$ 100

• Place of origin:  

  China

The shape that can be spinning can only be a rotating body, mainly barrel-shaped, conical-shaped, curved generatrix, and combined during spinning sheet metal forming. Customized Metal Spinning Parts If you want to know more types of manufacturing services , please visit our website. There are many machining manufacturing companies in China, but we are one of the best choices for you.

[Related Keywords : Metal Spinning]

Nov Varco TDS 11&11SA GYLD RING ROTARY 11.50 ROD 30119143

• Min. Order:  

  1 Piece

• Price:  

  US$ 1

• Place of origin:  

  China

56506-16-16-S ELBOW, 90 EXT/37 53406 CAP, PLASTIC PIPE CLOSURE 9/16 SAE 53415 CAP, PLASTIC PIPE 1-1/16 SAE 50908-S WASHER, LOCK-REGULAR, SS 50008-12-SD SCREW, CAP-HEX HEAD 50904-S WASHER, LOCK-REGULAR 50004-5-SD SCREW, CAP-HEX HEAD (UNC-2A) 50004-10-SD SCREW, CAP-HEX HEAD (UNC-2A) 30177314-500 STEM 30177594-500 STEM 30173159 ROTATING LINK ADAPTER 30173157 GEAR, ROTATING LINK ADAPTER (500 TON

[Related Keywords : Seal wiper, TDS]