Source Wholesale

Metal Recycling Equipment

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

https://www.scrapcrusher.com/psx-series-steel-scrap-production-line/ Metal Recycling Equipment Metal recycling equipment refers to machinery and tools used in the process of collecting, processing, and reusing metal materials from various sources. Metal recycling is an important aspect of sustainable waste management and resource conservation, as it helps reduce the environmental impact of metal

[Related Keywords : metal recycling equipment]

Oil Thrustor Brake

base plate Input : AC440/380/220V,3￠,50/60Hz Allowable Power Source Fluctuation : Voltage : -15~+10% : Frequency : ±5% Max. Duty Frequency : 400 Times/HR Duty Cycle : 40%ED, 60%ED, Continuous Insulation Class : Class F Paint Color : Munsell No 7.5BG6/1.5 Thrustor Oil : KSC 2301, OT4 Option Automatic Gap Adjuster LIMIT S/W Manual Releasing Device Brake cover : For Outdoor use only

[Related Keywords : TH Elema Eng, AC Magnetic Brake, Oil Thrustor Brake, Clipper Brake]

Trustor DIsc Brake

can be evaded. Specification Installation Method : Horizontal base plate Enclosure : Dust proof, Water proof (IP 65) Input : AC 440V/380/220V, 3Φ, 50/60 Hz Allowable Power Source Fluctuation : Voltage -15% ~ +10% Frequency: ±5%~10% Max. Duty Frequency : 600 Times/HR Insulation Class : Class F Ambient Temperature : -15 ~ + 40℃ Paint Color : MUNSELL NO. 7.5BG 6/1.5

[Related Keywords : TH Elema Eng, AC Magnetic Brake, Oil Thrustor Brake, Clipper Brake]

DC Inverter Thawing Machine

Input voltage 220V Input current 12A Output current range 10~230A Frequency 50Hz Duty cycle 60% Cooling method Forced air cooling Dimension(mm) 155W x 270H x 410L Thawing Machine Operation Possible by sources of electricity for home use Use 3.5mm2 input power cable Put up input power switch Adjust thawing current Set up thawing time Begin working by push the start button At time of abnormal over

[Related Keywords : DC, Inverter, Thawing, Machine]

XYZ Axis Desktop Screwing Machine/Screw Assembly Machine

• Place of origin:  

  China

source : 0.4Mpa Total Weight : 60kg Advantages 1. can be set through the touch screen coordinate value and the product of the screw , can be applied to a variety of common products . If the screw on the product specification is basically the same , you only need to replace the fixtures they can use the product . 3. monitor the entire quality of the equipment lock screw , in the event of bad touch

[Related Keywords : Desktop Screwing Machine, screw assembly machine, screwing machine, install screw machine]

Automatic Screwdriver Machine/Screw Fitting Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 8000 ~ 15000

• Place of origin:  

  China

• Supply Ability:  

  10sets/month

Auto screwdriver machine, Auto screwing machine Technical Parameters Efficiency: one product / 4 seconds Power supply : 220V AC Using air source :0.5-0 .8 Mp Screwdriver : Taiwan Kilews ( automatic clutch type ) Discharge : Robot unloading Description : 1. This machine is 8 -position turntable 4-axis locking screw machine , install eight clamps on the turntable . Each time turning the dial to com

[Related Keywords : Automatic screwdriver machine, screw fitting machine, automatic screwing machine, screwdriver machine]

SF6 Recovery and Gas Refilling Device

• Place of origin:  

  China

• Price Condition:  

  FOB Shengzheng

• Supply Ability:  

  10 sets/month

source: 380v, 50Hz, 3Phases III. SF6 retrieving equipment specifications A. HC series of high voltage retrieving Application: electric switch, retrieving in small quantity Particularity: high voltage and liquefaction Model Liquid store volume Retrieving rate Vacuum pump speed HC-30 30kg 4 M3/h 14 M3/h HC-50 50kg 4 M3/h 14M3/h B. LC series of low pressure retrieving Application: GIS elect

[Related Keywords : sf6 gas reclamation, sf6 vacuum evacuating, sf6 gas refilling, sf6 recovery]

Digital Temperature Controller

• Place of origin:  

  Korea

Source tolerable resistance Thermocouple : Max. 250Ω, Voltage : Max. 2 kΩ Lead wire tolerable resistance R.T.D : Max. 150Ω / wire (notice : Identical conductor resistance between 3wires) Input tolerable voltage ±10V (T/C, R.T.D, Voltage : mV DC), ±20V(Voltage : V DC) Noise removal rate NMRR(Nomal mode) : 40dB min. / CMRR(Common mode) : 120dB min.(50/60Hz ±1%) Standard T

[Related Keywords : Temperature Controller, Temperature regulator, PID Temperature controller, Controller]

INH/Inert

source : 200 V, Three phases Cooling water : 2 L/min Model INH-9CD INH-15CD INH-18CD Heat up time RT-600 deg.-C(Minutes) Less than 120 Less than 90 Less than 90 Exterior dimensionW x H x D(mm) 1105 x 1650 x 840 1255 x 1700 x 1020 1255 x 1800 x 1020 Inside dimensionW x H x D(mm) 450 x 450 x 450 600 x 500 x 500 600 x 600 x 500 Power requirement(kW) 8.1 12.6 12.6 Weight(kg) 300 650 680

[Related Keywords : Passive Component, INH/Inert]

Clean Ovens

source(V�hases) 100�1 200�3 200�3 Weight(kg) 1400 3300 5400 Flat zone length(mm) 50 180 250 Cooling water(L/min) None/None None/ 2 None/ 2 Model CLO-30C / CLO-30CH CLO-51C / CLO-51CH Stack Floor Floor Exterior dimensionW x H x D(mm) 860 x 1560 x 1170 860 x 2105 x 1210 Inside dimensionW x H x D(mm) 660 x 660 x 600 660 x 1320 x 650 Power source(V�hases) 200�3 200�3 Weight(kg) 5600

[Related Keywords : Clean Ovens]

Auto Announcing

Specification Out-put Channel : 8 ch(MAX) Interface Port : 2 Port Date Communication : RS-232C, RS-422 Speed : 9600bps Display : LCD Loop sensor : 8 Port(Contact) Memory IC : Flash Type System control : Microprocessor Sampling frequency : 15.6Khz Out put level : 0dbm Power Source : AC 220V, DC 24V Weight : 8kg Dimension : 483(W) x 133(H) x 320(D)

[Related Keywords : Auto Announcing]

Rheo Meter

Features This latest tester is used to test the treatments and the characteristics of unvulcanized rubber according to KSM 6687. This tester is newly developed to make easy check of the data on monitor. All tested data can be stored at PC and it can be printed out whenever you need. Specifications Electric Source : AC220V 60Hz 2Kw Torque Range : 25, 50, 100 Lb-in Temp Range : 100~200℃ Test

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Box Clamping Tester

Features This tester is used to test the clamping strength of various kind of packaging boxes and test result is stored in the pc also it printer output is possible. Specifications Max load : 2000kgf Size of Clamp : 48" x 48" Clamping system : Hydraulic cylinder Height of Upper Clamp : Max 500mm Distance of Clamp : 250~2,000mm Electric Power Source : AC220V 3 Θ3.5KW

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Fatigue Tester

a data against interruption electric power source Specifications Fatifue( & Endurance) test high cycle Fatigue-low cycle/ fatigue-variety Fatigue-low cycle/ Fatigue-variety Kind of simulations Tensile & compression test Crook test Capability test at the high temp-high temp tensile strength test-high temp crook test High temp & fatigue test Low temp fatigue test Formal spring constant test

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Medium-speed Granulator

• Min. Order:  

  1 set

• Place of origin:  

  China

• Price Condition:  

  FOB ningbo

source, double protection for the safety of human being and motor. 7.Separable design,the bunker, main body, mesh frame are dismounted easily, convenient for bunker cleaning. 8.special rubber belt ，the rotating efficency（0.92-0.97）of this special rubber belt is higher than “V”type belt’s（0.87-0.95). 9.With feet wheel,convenient for moving Technical Specifications: Model Power (kw)

[Related Keywords : middle speed granulator, plastic crusher, granulators, plastic machine]