Spring Mechanism Wholesale

Spring Hinges Refrigerator Parts

• Min. Order:  

  1000 Piece

• Price:  

  US$ 2

• Place of origin:  

  China

Refrigerator Parts, Chest freezer hinge Diameter of spring: 3.5 mm Cycles of spring: 10 Material: Cold rolled steel Cover/Cap Material : Plastic ABS Finished: Galvanized Opening angle: 80~90 degree Mechanism : Support open up the door of equipment . Completely avoid the noise from the door during door closing. Close softly and slowly automatically under 80 degree. 60pcs/ctn.

[Related Keywords : spring hinge, hinge, Refrigerator Parts]

Gear Type Liquid Level Transmitter (SGL)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Introduction: This is designed to measure the level of liquid such as water, diesel oil, bunker-c, etc. by using the buoyancy of float and spring force. When the float rises and falls, the gear mechanism connected to float through spring works to display the level on the front scale and an analog signal is also produced. Principle: When the tank is filling or emptying, the float rises and falls u

[Related Keywords : Transmitter, Magnetostric Type Liner Level]

Robot Dress Pack System

• Place of origin:  

  Korea

• Price Condition:  

  FOB

spring return. 2. Flexible Tube is directly connected to the end effecter (R axis) without any support so that robot can be operated in a limited space and any interference will be minimized. 3. Easy to install and move in directional change via use of clamping type attached to end effect(R-Axis) of robot. 3. Easy to move in different directions. Through adjustable mechanism at angle, any direct

[Related Keywords : Welding Robot, Welding Dress Pack]

Robot Dress Pack System

• Place of origin:  

  Korea

• Price Condition:  

  FOB

mechanism, any direct contact is eliminated in installatoin so that robot teaching can be easily implemented. 2. Prevents the hose and cables inside dressing pack from twisting while turning on the R-axis. 3. The simple main base is designed for easy installation 3. Cables are terminated with plug type connectors for quick installation. Full Length 6m Flexible Tube Length 2m Flexible Tube Spec.

[Related Keywords : Welding Robot, Welding System]

Fatigue Tester

Features In general, if machinery and structure except some specificate are influenced by repeated load at any rate, even though size of load if under yielding point. There are frequent occasion of break down by repeated and accumulated fatigues. This device adapted Hydraulic Servo Mechanism by Closed loop System is fatigue testing device which is possible naturally to examine Data Acquisition an

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

CNC Machining

• Place of origin:  

  China

• Supply Ability:  

  www.chinacncmachining.net

Spring Machine Metal Process: CNC turning, milling, drilling, planning, grinding, welding. Surface Treat: Zn (Cr3 RoHS free or Cr6 ) plated, Cr /Ni plated, hot-dip galvanizing, paint,anodize, powder coating, brush, Polish Technical: Dedicated mechanical designer, experienced worker 3D design service inclusive of modeling, analysis and detailed drawing at normal cost Quality: ISO 9001: 2008 Contr

[Related Keywords : CNC Machining, CNC Milling, CNC Turning]

Gas Spring

Spring also ensures stability compared to plate spring and coil spring. KOBA provides customized industrial gas spring for size, stroke, material, etc. KOBA industrial gas spring can be used to Semiconductor equipment, Machine cover, Manhole cover, Auxiliary power, vibrator cover, Mechanical equipment, Medical equipment, etc. Push Type Industrial Gas Spring KG Series (Push Type Industrial Gas Sp

[Related Keywords : gas spring, industrial gas spring, pull type gas spring, free lock gas spring]

Auto Ring Making and Welding Integrated Machine

• Min. Order:  

  1 case

• Price:  

  USD 1

• Place of origin:  

  China

• Price Condition:  

  FOB Shanghai

• Supply Ability:  

  50 Piece/Pieces per Year

mechanical or hydraulic ring making machines. 2. Advanced and reliable wire feeding: the feeding unit includes a high-end servo motor and a planetary reducer, works on the basis of "dual-drive". 3. Automatic ring making: sizes can be adjusted automatically, worker attendance is not required during machine running 4. Compatible welding: capable of welding low, medium and high carbon steel, spring

[Related Keywords : cage welder, Ring Making, Welding, Filter cage bag]

ZG-SF Series 16KW To 320KW /6-50KHZ Super-Audio High Frequency Solid State Induction Heating Quenchi

• Place of origin:  

  China

springs, shift forks, valves, rocker arms, ball studs and other auto parts. 4. High frequency quenching of various internal combustion engine parts and deceleration surface parts.   5. High frequency hardening of various pliers, scissors, axes, hammers and other hand tools. 6. High frequency hardening for all kinds of picks, drill bits, drill pipes, coal drill bits, air drill bits and other min

[Related Keywords : Induction Heater]

Control Butterfly Valves

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut-off. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Control butterfly valves with double offset design and triple o

[Related Keywords : Control Butterfly Valves]

W43B Leveling Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 100000000

• Place of origin:  

  China

• Supply Ability:  

  10000 Sets/Year

mechanism and the corner mechanism are combined together, using group technology, using two sets of the same power system, using YEJ type motor drive, so that the movable beam can accurately and automatically position and quickly swing angle; Working Principle Of W43B Leveling Machine The upper and lower support digs are multi-row diameter supports, arranged with the working spokes in an up and d

[Related Keywords : sheet leveler]

Power Tube Crimping Machine

• Place of origin:  

  China

mechanical type press, PLC type press, CNC type press. 1. The operation principle of the double hydraulic circuit is adopted, that is, the advance and retreat of the piston and the opening and shrinking movement of the mold are all generated by the hydraulic power source. It not only moves smoothly and returns quickly, but also does not occur like spring back position, so that the mold does not o

[Related Keywords : Power Tube Crimping Machi]

Lever Hoist, Lever Block

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Mechanical Load Brake : Brake can hold a full capacity load stationary in any position. Load is not transferred back to handle advancement Hook : All hooks are drop forged, heat treated steel with spring type latches. Both hook rotates 360° for easy rigging Load Chain : Electric welded G80 alloy steel chain is heat treated for wear resistance and strength. Accurately and uniformly sized to se

[Related Keywords : Lever Block, Lever hoist, Other Manufacturing, lifting]

Chain Block

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Mechanical Load Brake : Can hold a capacity load stationary at any position Hook : All hooks are drop forged hear treated steel with spring type latches. Both hook rotated 360° for easy rigging Chain Guide : Allows smooth operation of load chain Load sheaves : Deep cast pockets precisely fit the load chain. Load shafts are supported by prelubricated bearings for smooth operation Load Chain :

[Related Keywords : Chain Block, Other Manufacturing, material handling, lifting]

Wire Forming Machine, Spring Machine, Spring Coiling Machine, Spring Expression Machine HT-Y5120

• Place of origin:  

  China

• Supply Ability:  

  10 sets/month

mechanisms, ensuring high accuracy and strong power, minimizing load of motor and reducer, and enhancing the force. 6. Be equipped with precision detection and tracking system, achieving the automatic stop of the machine in case of any unqualified product, thus improving product quality while ensuring the qualification. 7. It is able to modify parameters such as outer diameter and angle of produc

[Related Keywords : SPRING MACHINE, SPRING M/C, COMPRESSION MACHINE, COILING MACHINE]