T Pipe Wholesale

Cartridge Heater with Fiberglass Wire, Swaged-in Mold Heating

• Place of origin:  

  China

• Supply Ability:  

  100000/month

pipe: When making heat pipe, we use stainless steel for housing, uniforms spiral heating alloy wire (nickel-chrome 8020) along the central axis of the tube, fill and compact the space with magnesium oxide sand having good insulation and thermal conductivity, seal the mouth of the pipe with liquid glue, silicone or ceramic glue(we can do moistureproof design if it is in the wet environment) and ma

[Related Keywords : Cartridge Heater, Heater, Mold Heating, Heating Element]

Belt Conveyor

• Place of origin:  

  China

The Belt Conveyor equipmen t is the necessary equipment in foundry's sand system. It is mainly used for conveying molding sand. The air conveying system mainly includes air compressor, air storage tank, air conveying cone pump, material storage hopper of air conveying and wearing resistance pipe. The molding sand conveying quantity can reach 30T per hour. It can’t be affected by molding conveyi

[Related Keywords : Belt Conveyor]

Velxun | Trimming Press Machine | Hydraulic Trim Press

• Place of origin:  

  China

pipes, flanges, and joints are engineered to prevent vibrations and leaks. The hydraulic system is mounted on top to save floor space. Both the upper slide and the worktable are equipped with T-slots for mold installation, and optional hydraulic center ejection is available. The trimming press achieves a positioning accuracy of up to 0.01mm, combined with a high-frequency hydraulic response syste

[Related Keywords : Trimming Press, Hydraulic Trim Press, Trimming Press Machine, velxun]

LJY Rebar Cold Extrusion Machine

• Place of origin:  

  China

T 80T 80T Oil Pipe Connector M24*1.5 M24*1.5 M24*1.5 Oil Pump Weight 80Kg 80Kg 85Kg Press Clamps Weight 35Kg 45Kg 50Kg The parameter of the cold extrusion coupler(No.20 steel) Size Out Diameter(mm) Wall thickness(mm) Length(mm) Weight(Kg) 16 30±0.5 4.5（+0.54/－0.45） 100±2 0.28 18 33±0.5 5（+0.6/－0.5） 110±2 0.38 20 36±0.5 5.5（+0.66/－0.55） 120±2 0.50 22 40±0.5 6（+0.72

[Related Keywords : Cold Extrusion Machine, Rebar Cold Extrusion, rebar Extrusion Machine, Rebar processing machines]

80KW-120KW, 80-200KHZ Ultra-High Frequency Induction Heating Hardening Machine (Water Cooling)

• Place of origin:  

  China

T: (NO). PHASE FAIL: this light is on shows that 3-phase has failed. If it is single phase, this light will be useless. SHORT CIRCUIT: When the light is on and the alarm is given, the IGBT module of the regulating part may be damaged, or the short circuit sensor may be damaged. Please consult our company for repair. OVER TEMP: When the temperature of these components is lower than 55 ℃, the ala

[Related Keywords : Induction Heating]

Metal Casting Foundry Resin Sand Reclamation Recycling System Molding Processing Foundry Equipment

• Min. Order:  

  1 Set

• Price:  

  US$ 2800 ~ 60000

• Place of origin:  

  China

pipes in the sand temperature regulator. The cooling water or hot water continuously flow in the heat sink which assembled with multilevel cooling pipes. Hot sand or cold sand is conveyed to from the water pipes for heating exchange. The sand will be conveyed out when reach the set temperature 8. Dust collector Dedust the workshop and operation equipment. All the equipments can is designed accor

[Related Keywords : foundry equipment, sand reclamation machine, sand recycling equipment, sand reclamation process]

S/F Double Wall Oil Storage Tank

• Min. Order:  

  1 Set

• Price:  

  US$ 2000 ~ 10000

• Place of origin:  

  China

• Supply Ability:  

  1 set per month

t produce chemical reaction with gasoline, diesel and gasoline including lead. 2.4 The installation of the leakage detector is convenient, just put the sensor into monitoring pipe. The output will be connected with monitor device and power source, and then can keep the monitoring for 24hours. 2.5 It is very convenient to check and maintain the leakage monitoring system, and protect the soil and w

[Related Keywords : Oil Storage Tank, Tank, S/F Double Wall]

Hex Nuts, Hex Head Bolts Fasteners, Strut Channel Fittings Manufacturers Exporters Suppliers in Indi

• Min. Order:  

  100 Unit

• Price:  

  US$ 100

• Place of origin:  

  India

T bracket, Angle bracket, Delta bracket, Welded Gusset bracket, Obtuse bracket, Z bracket, C bracket, Top Hat bracket, Base Plates, Internal External Connectors, Wing brackets, Strut Channels, Plain Channels, Slotted Channels, Cantilever Arms, Slotted Cantilever Arms, pipe clamps, single pipe clamp, clevis clamp and clamp accessories, Castings Strut Pipe Clamps, Clevis Hanger, channel Purlin Clam

[Related Keywords : Hex Nuts hex bolts]

2400Tons Metal Forming Hydraulic Press for New Energy Vehicle Battery Case

• Place of origin:  

  China

pipes are fitted based on advanced Taiwan technology to achieve shock-resistance. Electric Control SystemElectric box is featured with dustproof, waterproof and oil proof. Adopt Schneider electric units to ensure high quality. All units to ensure high quality. All units have labels, so it's clear to identify and easy to maintain. As a professional China 2400T Metal Forming Hydraulic Press For New

[Related Keywords : Hydraulic Press]

Rapid Prototype Machining Parts

• Min. Order:  

  1 Unit

• Price:  

  US$ 10 ~ 160

• Place of origin:  

  China

t be injection molded. - Vacuum Casting Materials - HardnessColorsApplicationsABS-LikeABS-Like is a general purpose polyurethane plastic that simulates ABS thermoplastic. This material is a great choice for most product enclosures. All colors; precise pantone color matching availableGeneral purpose, product enclosuresAcrylic-LikeAcrylic-Like is a stiff, transparent polyurethane plastic that simul

[Related Keywords : Rapid Prototype, Prototype, Machining Parts, Machining]

No-Dig FRP Sware Rehabilotation System

pipe side) Cured in Place (Heat will be provided by the equipped silicon rubber heater housed in the rubber sleeve packer to cure the epoxy- acryl resin . Check the repair condition by CCTV camera with robotic crawler and record it by VTR at the site located controller system in the vehicle on the ground. *Necessary Equipment 1. Agent Epoxy-acryl resin (Vinyl-Ester Resin) : SY-628, SY-629T, SY-6

[Related Keywords : No-Dig FRP Sware, Rehabilitation System]

Magnetic Filter

water by helix state. The part Forces +/- hydronium temporarily into cathode to exchange water molecule and mineral hydronium,makes Ca2+/Mg2+to unite electron,and has no cation function temporarily. Hence,even heating, it doesn't unite hydronium---for example So42+,The part makes water not to scale any more. Magnetic filter part makes water soft, and scale will be never produced in water pipe.

[Related Keywords : Magnetic Filter]

Profile Bending Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 100000000

• Place of origin:  

  China

• Supply Ability:  

  10000 Sets/Year

T beam 80X9 Φ700 100X12 Φ800 120X13 Φ1250 150X15 Φ1200 160X20 Φ1400 200X20 Φ1600 200X28 Φ1800 200X281 Φ1600 200X281 Φ1600 T-shaped steel bend 80X9 Φ1300 100X12 Φ1500 100X12 Φ1500 130X15 Φ1700 150X20 Φ2000 180X18 Φ2500 200X20 Φ2800 200X281 Φ2500 200X281 Φ2500 Flat steel bending 80X18 Φ800 100X25 Φ700 120X25 Φ1000 150X30 Φ1000 175X

[Related Keywords : profile bending]

Tobacco Cutting Machine, Herbs Cutting Machine

• Min. Order:  

  1

• Place of origin:  

  Poland

• Price Condition:  

  FOB

We introduce machine to cut leaves, feed and herbs. The machine is suitable for small companies. MPSS-1 is very simple in using, person working on the machine doesn't have to make any complicated operations. It is lightweight and mobile, occupies a small workspace. It can be adapted to 230V or 400V. Transport tape together with pressing roller move material forward to the knife. Material is p

[Related Keywords : Tobacco, Herbs, Cigarette]

High Speed Slitting Line

• Min. Order:  

  1 Set

• Price:  

  US$ 80000

• Place of origin:  

  China

pipe, cold bend forming, stamping as billet. At the same time, changing different material blade can slit various metal coils. Main Technical Parameter 1. Material: Hot rolled steel coil (δb≤450Mpa, δs≤260Mpa) 2. Thickness of material: 0.3—3.0mm 3. Width of material: 400-1500mm 4. Coil I.D: Ø508 (with pad for 610mm I.D.) 5. Coil O.D: ≤Ф1600mm 6. Weight of coil: 15T 7. Finished product

[Related Keywords : slitting machinery, slitting & recoiling line, slitter line, metal sheet slitting lin]

Hydrogen Oxygen Hho Brown Gas Generator Acrylic Polishing Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

• Supply Ability:  

  200 per month

pipe welding, Automobile exhaust pipe welding,Fishhook welding,Storage battery tinplate welding,lighting hardware welding and etc. 3. Heating and sealing (1) metal and nonmetal heating (2) glass tube sealing,quartz glass tube sealing (3) ampoule bottles sealing (4) water injection drawing sealing (5) mould repair, quenching, crucible heating melting metal (6) solar wafer processing, IC packagi

[Related Keywords : hho generator, brown gas generator, hydrogen oxygen generator, Acrylic Polishing Machine]

Brown Gas Generator with 400 Liter/Hour Gas Output

• Place of origin:  

  China

• Supply Ability:  

  3000 sets per month

pipes welding,fishhook welding,storage battery tinplate welding 6.carbon cleaning for car's engine Tech Datas: Model:405T Power Rating: 1200 w Gas Production Rate: 400L/H Working Medium:Distilled Water or Boiled Water Power Supply:110V-240V/50-60Hz Operating Pressure: 0.17Mpa(Normal) Water Consumption: 0.12L/H Gross Weight: 26kg External Dimensions: 77cm*30cm*54cm brown gas generat

[Related Keywords : brown gas generator, oxyhydrogen gas generator, hydrogen flame generator]

Hydraulics Forming Press Machine for SMC Material 800t

• Min. Order:  

  1 Unit

• Price:  

  US$ 200000 ~ 400000

• Place of origin:  

  China

• Supply Ability:  

  300-500 PCS/Year

Basic Info.Model NO.TT-LM800T/LSWarranty12 MonthsMachine TypeHydraulic Die Spotting PressTons800tTransport PackageWooden CaseTrademarkTAITIANOriginChinaProduction Capacity300-500 PCS/YearProduct DescriptionTAITIAN offers hydraulic die tryout press machine that can be custom built to fit the needs of high precision die spotting. Hydraulic die tryout press also called die spotting press, mould tryo

[Related Keywords : hydraulics, hydraulicpress, Forming, molding]

Hydrogen Flame Generator -405T with Hho Gases Output Ranging From 100 L/H To 600 L/H Newly

• Place of origin:  

  China

• Supply Ability:  

  5000 sets/month

pipes welding,fishhook welding,storage battery tinplate welding carbon cleaning and saving oil for cars and boats ... ... tech data of hydrogen flame generator-105T： power input: AC 220V±10% or AC 110V±10% frequency: 50HZ/60HZ gas output: ≥100L/H electrolytic cell volume: 1.8 L feeding cell volume: 1.2 L max. water adding: 2.4 L no.of electrolytic cell: 1 no.of feeding

[Related Keywords : hydrogen flame generator, micro flame welder]

Hydrogen Flame Generator-405T with 400 Liter/Hour Hho Gases Output Newly

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  2000

pipes welding,fishhook welding,storage battery tinplate welding carbon cleaning and saving oil for cars and boats ... ... tech data of hydrogen flame generator-105T power input: AC 220V±10% or AC 110V±10% frequency: 50HZ/60HZ gas output: ≥100L/H electrolytic cell volume: 1.8 L feeding cell volume: 1.2 L max. water adding: 2.4 L no.of electrolytic cell: 1 no.of feeding cel

[Related Keywords : hydrogen flame generator]