Temperature Control Wholesale

2000*4000mm Cutting Size Factory Price Water Jet Cutting Machine Save Your 10%-30% Cutting Cost

• Min. Order:  

  1 Set

• Price:  

  US$ 55000

• Place of origin:  

  China

• Price Condition:  

  FOB QINGDAO

• Supply Ability:  

  10 sets per month

Controller Displace Can be fit to suitable place at own will Automitic Abrasive Feeder Founction Sand storage and sand delivery Operating No need electrocnic control,sample operation Capacity 200 kg for 8 -10hours Pressure 0.3-0.6Mpa compresses gas pressure Color White Deionization System Water pressure 0.15Mpa~0.6Mpa Water temperature 5°C~50°C Environment temperature 5°C~50°C

[Related Keywords : cheap water cutting machine, water cutting machine, waterjet cutting machine, stone cutting machine]

IFT 458 Ignition Controller

• Min. Order:  

  50-100

• Place of origin:  

  China

• Price Condition:  

  FOB

voltage ignition cable is better less than 1 meter; Reset only after alarm lights; Output Current: The maximum current for every output is 2A; Maximum total current is 2.5A; Fuse: 2A, Slow Melt H-Line with IEC127-2/5; Work Life: 1X106 Times, 270000 Times for Single-electrode; Ambient Temperature: -10°C~+60°C; any condensation is not allowed; Protection Level: IP40 meets IEC529.

[Related Keywords : Ignition Controller]

1. CNC Cut-to-length Slitting

• Min. Order:  

  1 Set

• Price:  

  US$ 360000

• Place of origin:  

  China

China Quan Yue CNC Machinery Co., Ltd. Provide worldwide primarily for rolling bearing inner and outer rings, gear ring, pipe flanges, wheel hub, slewing, lifting conveyor rotating wheels, large containers strengthened circle, aircraft engine shell and other casing forgings, rolling carbon steel, stainless steel, titanium, copper alloys, aluminum alloys and high temperature alloys and other mater

[Related Keywords : Slitting, Machinery, production lines, hydraulic valve]

Wall Controller with Touch Buttons

• Min. Order:  

  100 PCS

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  100000pcs/month

KF-600E Intelligent Air Controller (VOC + PM2.5) 1. Introduction: KF-600E intelligent air controller uses touch button technology, easy operation. Built-in sensors can monitor real-time indoor temperature, VOC concentration, PM2.5 concentration; Controller output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial appl

[Related Keywords : Wall controller, Air quality, Touch buttons, Ventilator control]

NT6800WNR 6 Relay DO 8 Isolated Input DI Communicate by RJ45 Network or Wi-Fi Support Modbus-TCP

• Min. Order:  

  1 Piece

• Price:  

  US$ 68

• Place of origin:  

  China

Introduction NT6800WNR has 6 relays, 8 isolated input. Communicate by rj45 network or Wi-Fi, supports Modbus-TCP. ( NT6800WNDSR: with one DS18B20 temperature sensor in addition ) It can be controlled by PLC / computer / android, suitable for industrial automation, data acquisition systems, environmental monitoring and local control of an electrical and non-electrical parameter, building automatio

[Related Keywords : Modbus, Relay, DO, DI]

Oil purifier

temperature, and oil leak detection functions) Option Starter Automation system / emergency shut-down system for oil feed Discharge detection function (multi-monitor system) Butterfly valve Cleaning table Oil heater (electric/steam) Accessories Manifold type solenoid valve unit for operating water Automation system Multi-monitor system (Oil flow, discharge pressure, oil flow tempe

[Related Keywords : Oil purifier]

The Future of Visual Technology

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

to occupy a favorable market position. Large-size, high-definition multi-function integrated vehicle touch panels will become a standard configuration. At the same time, the vehicle panel needs to be able to be affected by the driving environment, outdoor strong light and high temperature, and the vehicle navigator with resistive or capacitive touch screen has strong anti-interference ability.

[Related Keywords : Visual Technology]

Hot Air Gun+Soldering Iron SMD Rework Soldering Station 2 in 1

• Min. Order:  

  100pcs

• Price:  

  USD 38.83

• Place of origin:  

  China

• Price Condition:  

  FOB Shenzhen

• Supply Ability:  

  1000 pieces per week

Output: 550W±10% Temperature range: 100°C~450°C the air current measures 120L/min (max) Establishes the way: Pressed key adjustment Display mode: Control Knob Obviously warm way: Digital calibration Temperature Locking way: Control knob Fuse:250V/5A Control Station: Output Voltage:200V Temperature Range:100~450 °C Temperature Display:Imirate Wind Velocity:120L/Min(max)

[Related Keywords : Hot Air Gun, Soldering Iron, SMD Rework Soldering Station, Rework Soldering Station]

Connector Assembly Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 2000 ~ 5000

• Place of origin:  

  China

temperatures and mechanical stresses. The machine may have electronic parts such as microcontrollers and touchscreens, which require PCB boards, wires, and cables for their functioning. The materials used to manufacture connector assemble machines should have high durability, heat resistance, and conductivity to meet the requirements of the electrical and electronic industries. HOW TO USE CONNEC

[Related Keywords : connector assembly machin]

Bule Color Reci DY13 100Watt CO2 Laser Power Supply for RECI 100Watt W4 1.4meter CO2 Laser Tube

• Min. Order:  

  50 Piece

• Price:  

  US$ 101 ~ 121

• Place of origin:  

  China

• Supply Ability:  

  4000PCS each month

Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistan

[Related Keywords : Dy-13 Co2 Power Supply, Reci 100w power supply, DY13 LASER POWER SUPPLY, 100W RECI POWER SOURCE]

Automatic CNC Thread Rolling Machine

• Place of origin:  

  China

control can eliminate tooth bias to achieve high precision rolling; ● Non-hydraulic feed ball screw, reduce the influence of hydraulic temperature change on machining accuracy; ● With radial rolling, axial rolling, rerolling, reciprocating rolling 4 processing methods, can be the same workpiece for multi-station rolling in turn; ● This Automatic CNC Thread Rolling Machine is Equipped with s

[Related Keywords : Automatic thread rolling]

Oil-water Separator with Patents for the Sale

• Min. Order:  

  1 Set

• Price:  

  US$ 540

• Place of origin:  

  China

• Supply Ability:  

  300 sets per Month

Temperature:0℃-65℃ Oil Tank Capacity: 4L Input Voltage: AC 110V/220V 50/60Hz Input Power: 25W Work Period Setting: 16 Periods per Day Revolving Speed of Pump motor: 0-80rpm(Stepless Adjustable) Revolving Speed of Oil Scraper: 0-30rpm(Stepless Adjustable) Advantages 1 hour running everyday! Depose once a week! 1kWh each month! Independently design the floating inlet position floating oil la

[Related Keywords : oil-water separator, oil skimmer, oil scraper, oil remover]

Pit Aluminum Solid Solution Heat Treatment Furnace

• Min. Order:  

  1 set

• Price:  

  RMB 36000

• Place of origin:  

  China

• Price Condition:  

  FOB HeFei

• Supply Ability:  

  ex) 20 Set per Month

Pit aluminum solid solution heat treatment furnace Pit solid aluminum electric furnace cycle mode of operation is to improve from the RJ2 Series Pit Furnace, based on the built-in stainless steel draft tube. By improving air circulation, improve temperature uniformity and temperature control precision, designed for aluminum solution quenching and aging heat treatment purposes, aluminum frame, al

[Related Keywords : heat treatment furnace, Furnace, Pit furnace, aluminum furnace]

Extruder (PP Danline, HDPE)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

- Extruder for making synthetic ropes PP Danline extruder line HDPE mono filament extruder line Our extruder system consist of following units basically. A. EXTRUDER B. AUTOMATIC TEMPERATURE CONTROL PANEL C. DIE & NOZZLE D. QUENCHING BATH E. NO. 1 STRETCHING MACHINE F. STRETCHING BATH G. NO. 2 STRETCHING MACHINE H. TAKE-UP WINDER Please click here for full informations of Extruder.

[Related Keywords : Extruder PP Danline, HDPE yarns]

Quenching and Aging Furnace for Aluminum Alloy

• Min. Order:  

  one set

• Place of origin:  

  China

• Price Condition:  

  FOB SHANGHAI

Temperature control precision ±1℃ Temperature uniformity ±5℃ Control mode Temp, PID, automatic + manual, total intellectual computer control Scope of application Wire & cable field, wheel hub of automotive industry, solid solution heat treatment o aluminum alloy accessories like engine cylinder block and cover, aircraft industry, aluminum alloy annealing of war industry and othe

[Related Keywords : Quenching, Aging, Furnace, Aluminum Alloy]