Temperature Controls Wholesale

3000*4000mm Cutting Size 420mpa High Speed High Pressure Glass CNC Water Jet Cutting Machine

• Min. Order:  

  1 SET

• Price:  

  USD 55000

• Place of origin:  

  China

• Price Condition:  

  FOB QINGDAO

• Supply Ability:  

  10 SETS MONTH

Controller Displace Can be fit to suitable place at own will Automitic Abrasive Feeder Item Parameter Founction Sand storage and sand delivery Operating No need electrocnic control,sample operation Capacity 200 kg for 8 -10hours Pressure 0.3-0.6Mpa compresses gas pressure Color White Deionization System Item Parameter Water pressure 0.15Mpa~0.6Mpa Water temperature 5°C~50°C Environment

[Related Keywords : high pressure, high speed, cnc water jet cutting, 420mpa water jet cutting]

IFT 458 Ignition Controller

• Min. Order:  

  50-100

• Place of origin:  

  China

• Price Condition:  

  FOB

voltage ignition cable is better less than 1 meter; Reset only after alarm lights; Output Current: The maximum current for every output is 2A; Maximum total current is 2.5A; Fuse: 2A, Slow Melt H-Line with IEC127-2/5; Work Life: 1X106 Times, 270000 Times for Single-electrode; Ambient Temperature: -10°C~+60°C; any condensation is not allowed; Protection Level: IP40 meets IEC529.

[Related Keywords : Ignition Controller]

1. CNC Cut-to-length Slitting

• Min. Order:  

  1 Set

• Price:  

  US$ 360000

• Place of origin:  

  China

China Quan Yue CNC Machinery Co., Ltd. Provide worldwide primarily for rolling bearing inner and outer rings, gear ring, pipe flanges, wheel hub, slewing, lifting conveyor rotating wheels, large containers strengthened circle, aircraft engine shell and other casing forgings, rolling carbon steel, stainless steel, titanium, copper alloys, aluminum alloys and high temperature alloys and other mater

[Related Keywords : Slitting, Machinery, production lines, hydraulic valve]

Wall Controller with Touch Buttons

• Min. Order:  

  100 PCS

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  100000pcs/month

KF-600E Intelligent Air Controller (VOC + PM2.5) 1. Introduction: KF-600E intelligent air controller uses touch button technology, easy operation. Built-in sensors can monitor real-time indoor temperature, VOC concentration, PM2.5 concentration; Controller output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial appl

[Related Keywords : Wall controller, Air quality, Touch buttons, Ventilator control]

NT6800WNR 6 Relay DO 8 Isolated Input DI Communicate by RJ45 Network or Wi-Fi Support Modbus-TCP

• Min. Order:  

  1 Piece

• Price:  

  US$ 68

• Place of origin:  

  China

Introduction NT6800WNR has 6 relays, 8 isolated input. Communicate by rj45 network or Wi-Fi, supports Modbus-TCP. ( NT6800WNDSR: with one DS18B20 temperature sensor in addition ) It can be controlled by PLC / computer / android, suitable for industrial automation, data acquisition systems, environmental monitoring and local control of an electrical and non-electrical parameter, building automatio

[Related Keywords : Modbus, Relay, DO, DI]

Oil purifier

temperature, and oil leak detection functions) Option Starter Automation system / emergency shut-down system for oil feed Discharge detection function (multi-monitor system) Butterfly valve Cleaning table Oil heater (electric/steam) Accessories Manifold type solenoid valve unit for operating water Automation system Multi-monitor system (Oil flow, discharge pressure, oil flow tempe

[Related Keywords : Oil purifier]

Hot Air Gun+Soldering Iron SMD Rework Soldering Station 2 in 1

• Min. Order:  

  100pcs

• Price:  

  USD 38.83

• Place of origin:  

  China

• Price Condition:  

  FOB Shenzhen

• Supply Ability:  

  1000 pieces per week

Output: 550W±10% Temperature range: 100°C~450°C the air current measures 120L/min (max) Establishes the way: Pressed key adjustment Display mode: Control Knob Obviously warm way: Digital calibration Temperature Locking way: Control knob Fuse:250V/5A Control Station: Output Voltage:200V Temperature Range:100~450 °C Temperature Display:Imirate Wind Velocity:120L/Min(max)

[Related Keywords : Hot Air Gun, Soldering Iron, SMD Rework Soldering Station, Rework Soldering Station]

Oil-water Separator with Patents for the Sale

• Min. Order:  

  1 Set

• Price:  

  US$ 540

• Place of origin:  

  China

• Supply Ability:  

  300 sets per Month

Temperature:0℃-65℃ Oil Tank Capacity: 4L Input Voltage: AC 110V/220V 50/60Hz Input Power: 25W Work Period Setting: 16 Periods per Day Revolving Speed of Pump motor: 0-80rpm(Stepless Adjustable) Revolving Speed of Oil Scraper: 0-30rpm(Stepless Adjustable) Advantages 1 hour running everyday! Depose once a week! 1kWh each month! Independently design the floating inlet position floating oil la

[Related Keywords : oil-water separator, oil skimmer, oil scraper, oil remover]

Externally Heat Furnace Nitrate Salt Bath Furnace

• Min. Order:  

  1 Set

• Price:  

  US$ 36000

• Place of origin:  

  China

• Supply Ability:  

  ex) 20 Set per Month

temperature control cabinet composition, the use of nitrate were parts quenching, tempering heating temperature quenching and other processes, liquid chemical heat treatment furnace body welded from steel and steel plate, cold-rolled sheet steel stove surface, lining using energy-saving ultra-light high-intensity firebrick, dissecting home silicate fiber, filled with insulation, insulation powder

[Related Keywords : nitrate salt bath furnace, salt bath furnace, furnace, Externally heat furnace]

Extruder (PP Danline, HDPE)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

- Extruder for making synthetic ropes PP Danline extruder line HDPE mono filament extruder line Our extruder system consist of following units basically. A. EXTRUDER B. AUTOMATIC TEMPERATURE CONTROL PANEL C. DIE & NOZZLE D. QUENCHING BATH E. NO. 1 STRETCHING MACHINE F. STRETCHING BATH G. NO. 2 STRETCHING MACHINE H. TAKE-UP WINDER Please click here for full informations of Extruder.

[Related Keywords : Extruder PP Danline, HDPE yarns]

Quenching and Aging Furnace for Aluminum Alloy

• Min. Order:  

  one set

• Place of origin:  

  China

• Price Condition:  

  FOB SHANGHAI

Temperature control precision ±1℃ Temperature uniformity ±5℃ Control mode Temp, PID, automatic + manual, total intellectual computer control Scope of application Wire & cable field, wheel hub of automotive industry, solid solution heat treatment o aluminum alloy accessories like engine cylinder block and cover, aircraft industry, aluminum alloy annealing of war industry and othe

[Related Keywords : Quenching, Aging, Furnace, Aluminum Alloy]

JT6313A Electronic Load Tester

• Price:  

  USD 700

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  100SETS/MONTH

temperature, polarity reversed protection. Automatic test alone Press one button to complete load effect, ripple, dynamic, OCP and Short circuit test. Show complete test report and support step test. Multi load synchronous control Support up to 16 loads Sync. loading & dynamic test, fit for testing multi-output power supply. Support up to 16 loads parallel mode for high power. High rising speed

[Related Keywords : electronic load, dc electronic load]

Industrial Quality YT50 C-type Wire Rope Swaging Machine

• Min. Order:  

  1set

• Price:  

  USD 2800

• Place of origin:  

  China

• Price Condition:  

  FOB Tianjin

• Supply Ability:  

  20set per month

temperature, quenching, tempering and other processes, becoming sturdy and durable. ♦The body adopts C-type design, making the operation simpler and more convenient. ♦It follows microcomputer intelligent control to control equipment automatic unload according to the pressing force required by the wire rope, making the operation more user-friendly. Machine model YT50 YT150 YT350 YT600

[Related Keywords : wire rope press machine, pressing machine, hydraulic press machine, machine made in china]

CIGS Solar Panel Laminator Thin Film Solar Panel PV Laminator Mini PV Laminator for R&D 400*500mm

• Min. Order:  

  1 Set

• Price:  

  US$ 9000 ~ 18000

• Place of origin:  

  China

• Supply Ability:  

  5sets

Control modeAutomatic/ ManualUltimate vacuum20 PaHeating modeElectrical heating systemTemperature control modePID ControlMaximum temperature170ºCTemperature uniformity±3ºC Multi-point temperature controlWork temperature100ºC~160ºCControllable temperature precise≤±3ºC (at the regulated set temperature valueUnevenness of the worktable Unevenness≤300 μm/m²Air discharge speedCan adjust c

[Related Keywords : solar panel laminator, solar laminating machince, Lab solar laminator, PV module laminator]

Phoenix HT

Auto Contact Angle Analyzer Model : Phoenix HT Feature The Phoenix-HT is designed for applications such as adhesion of metal pastes and alloys at high temperatures and can measure the contact angles at high temperature up to 1200 °C The thermal system of the Phoenix-HT can control the inert gas or vacuum for preventing the sample from being oxidized. The easy operation and handling of thi

[Related Keywords : Auto, Contact, Angle, Analyzer]