C Section Wholesale

Hangao Bright Annealing Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 29800

• Place of origin:  

  China

• Supply Ability:  

  20sets per year

C, the time is about 15min, the insulation section after reaching 1050 insulation temperature only needs 5-8A current to maintain the temperature, will not increase the actual output power because of the size of the steel pipe and the increase of the production line speed. • More humanized: the insulation section only needs to set the insulation temperature once, and it will not need to be manu

[Related Keywords : bright annealing machine]

GRP Water Tank(Grp Panel Tank)

C -20°C -30°C 16ton single layer type 35 20 13.5 insulation type 164 81 58.5 1ton single layer type 11 6 4 insulation type 37.5 23 13.5 Optional Water Inspection Window Developed for easy water condition check from outside of Sectional GRP water tank by not using ladder. Physical Properties GRP Panel's Physical Properties/Basis on KS F 4811 Tensile Strength - 850kg/cm2 Flexural Strength -

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

MPA Flowmeter (MPA)

Operating Principle The 12∼24 pressure sensing holes placed widely across the entire cross-sectional area of the pipe responds correctly to any velocity distribution and naturally accommodate Reynolds Number Effect, and produce differential pressures that represent highly accurate average velocity. urn down Ratio 12 : 1 (RD) Process temperature Max. 450°C Process pressure Max. 100

[Related Keywords : Flowmeter]

HDPE Chemical Pump

• Place of origin:  

  Korea

• Price Condition:  

  FOB

C Revolution 1750, 3500rpm 1450, 2900rpm Rotation CW(Clockwise viewed from coupling end) Shaft sealing Mechanical SealSIC/Carbon, Unbalance, Rubber:Bellows Type Flange KS 10kgf/cm2(JIS, 10kgf/cm2), FF Type Bearing Lubrication Oil bath Type Bore 32~150mm Selection Chart Section Drawing-1 Sectional Drawing-2 Outline Dimensions Deal Drawing Precautions before using : Warning Please fix pump and moto

[Related Keywords : pump, chemical pump, acid fine chemical, industries petrochemical pollution control]

Waste Tires Pyrolysis Incinerating Plant

section differs according to the type of wasted materials used. Estimates are shown below, Below 200°C in drying section Below 700°C in pyrolysis section Below 1,000°C in gasification section Above 1,000°C in combustion section It would be advisable that oil and gas produced by pyrolysis process in the absence of oxygen are good fuel with high calories, while pyrolysis gas has

[Related Keywords : Incinerating Plant, Waste Tires Pyrolysis]

Professional Manufacturer for High Temperature Nitrogen Protective Metal Wire Electricity Annealing

• Place of origin:  

  China

High temperature Nitrogen protective metal wire electricity Annealing Furnace Model: RJ-90-9N Ф900 x 1200mm Specification: Power 90KW Rated temperature 900ºC Voltage 380V 3Phase 50/60HZ Effective Linner size Ф900´1200mm Machine size Ф1800´2000mm Linner material: Stainless steel 0Cr21Al6Nb Control system PID control Temperature area 2 area Temperature accuracy ≤ ±1ºC Temperature to

[Related Keywords : furnaces, Oven, anneal furnace, heat treatment furnace]

Irish Moss Chondrus Crispus Sea Moss Buk 100 Natural Organic Wild Grows Roks

• Min. Order:  

  1 Ton

• Price:  

  US$ 70

• Place of origin:  

  Peru

• Supply Ability:  

  10 TON PER MONTH

C, total ascorbicacid 3,000 mg crude fat 27,000 gr Thiamine 0.015 mg – – Riboflavin 0.466 mg – – Niacin 0.593mg Pantothenic acid 0.176m Vitamin C 3.000 Mg Vitamin B - 6 0.069 mg – – Folate, total 182,000 mcg Folic acid 0.02 mg colbate 00.07 Mg Folate, food 182,000 mcg Folate, DFE 182,000 mcg_DFE – – Choline, total 12,900 mg – Vitamin k 5,000 g. B12 vitamin . 13.mg Vitamin B - 12

[Related Keywords : seamoss chondrus crispus, irish moss]

Cast Rolls Hot Strip Continuous Mill & Plate Mill Work Roll (HiCr Cast Roll, ICDP Rolls,HSS Rolls)

• Place of origin:  

  China

• Supply Ability:  

  20000 tons/year

C and MC carbides homogeneously distributed and a certain amount of free graphite fine and also well distributed in the matrix.the rolls are double tempered to avoid retained Austenite and to obtain the right hardness level and the optimum residual stress level. Core material: Nodular Iron or Grey Iron depending on the mill or customer's requirementsApplication: Late finishing stands (F4 - F7) of

[Related Keywords : cast rolls strip mill, high chrome cast rolls, icdp rolls hot rolling, HSS rolls for mills]

C Purlin Roll Forming Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

c purlin machine manufacturers in China, this C purlin machine series ;possess both stable performance and reliable quality! Features and Advantages of C Purlin Roll Forming Machine Fully automatic continuous C profile purlin roll forming machine for both heavy and light-duty use. Adopts changing spacers to make multi sizes profiles sections. Inline flexible punching system integrated Pre-cutting

[Related Keywords : C Purlin Roll Forming]

Digital Thermostatic Lab Vacuum Drying Oven for Sale

• Min. Order:  

  1 Set

• Price:  

  US$ 417~648

• Place of origin:  

  China

• Supply Ability:  

  1000sets/Month

sections (up to 10 sections) intelligent programmable LCD controller 7."LC"series vacuum oven are vacuum degree LCD screen controller. Parameter of vacuum drying oven Model DZF-6021 DZF-6020 DZF-6020D DZF-6030A DZF-6030AD DZF-6020B DZF-6030B DZF-6050B Voltage 220v 50HZ 220v 50HZ 220v 50HZ 220v 50HZ Power 450w 450w 450w 350w/450w Temp. range +10-200ºC +10-250ºC +10-250ºC +5-

[Related Keywords : Drying Oven, Vacuum Drying Oven, Lab Vacuum Drying Oven, Digital Vacuum Drying Oven]

CNC Machining Nylon

• Min. Order:  

  1 Piece

• Price:  

  US$ 20 ~ 999

• Place of origin:  

  China

section, AMT gear selection and shift actuator worm gear, power steering, shock absorber drive Wait. 4. Ships: Nylon plastic stern bearings have been widely used in ships, and the ship stern bearings are mainly made of synthetic materials such as nylon. In ship propulsion systems, water-lubricated bearings that use water as the working medium instead of mineral oil have the characteristics of str

[Related Keywords : nylon machining]

0.3-2 1600MM Steel Cut To Length Line

• Place of origin:  

  China

C ut To L ength Line No Component Name Number 1 Coil Loading Car 1 Unit 2 Hydraulic Decoiler 1 Unit 3 Loop 2 Units 4 Side Guide Device 1 Unit 5 Straightener Machine 2 Unit 6 High Precision Shearing Machine 1 Unit 7 Transportation Table 1 Unit 8 Pneumatic Stack 1 Unit 9 Hydraulic Control System 1 Set (The parts list is for reference only and needs to be customized according to the customer's needs

[Related Keywords : Steel Cut Length Line]

Type SG Silicon Carbide Heating Elements

• Place of origin:  

  China

• Supply Ability:  

  15000 sets per month

The spiral silicon carbide are made of special high-density reaction-bonded silicon carbide. A spiral slot in the hot zone reduces the cross sectional area. This provides the electrical resistance ratio to make the ends cool and the hot zone hot. Special cold ends may be welded to further enhance the resistance ratio. To provide a low resistance contact surface the extremities are metallized with

[Related Keywords : SiC, Heating Element, Rod, Refracroty]