Continuous Light Wholesale

30-160KW 10-30Khz Induction Heating Machine

• Place of origin:  

  China

Ultrasonic induction heating equipment IGBT inverter used, high efficiency and low energy consumption Can work continuously with 100% duty cycle and set up 100% at any load Can replace convention heating method such as heating by flame coal salt bath gas and oil Work frequency 10-30Khz, power 30-250KW Digital display and compact design, light weight, easy for installation and operation Soft switc

[Related Keywords : Induction Heating Machine]

Vacuum Brazing Furnace

• Place of origin:  

  China

light alarm prompts and corresponding interlocking, interlocking protection functions. Maximum temperature 1300°C Maximum continuous operating temperature ≤1250°C Temperature uniformity ±5°C(empty, room temperature furnace) Maximum heating rate From room temperature to 1200°C≤60 minutes, empty furnace Limiting vacuum 10 -4 PA Vacuum chamber pressure rise rate 0.4 Pa / h(empty, room

[Related Keywords : Vacuum furnace]

Suitable for Electrical Equipment PU Polyurethane Foam Pad Dispensing Sealing Machine

• Min. Order:  

  1 Piece

• Price:  

  US$ 38500

• Place of origin:  

  China

lighting, lifting jack, Mitsubishi water-proof box, Percolator filter, plastic cabinet, Plastic water-proof box, Lamp cover, Locks shell, Purification room door, Refrigerator door, Transformer protect cover, Street lighting, Water－proof cabinet, Water-proof cabinet, Waterproof box, Transparent box, Air cleaning filter, ABS Enclosure Junction Box, ventilation cover, Explosion-proof light, Outdoo

[Related Keywords : pu dispesning machine, pu gasket machine, pu foam machine, foam machine]

Trimble 5600 Total Station

• Min. Order:  

  1 Piece

• Price:  

  US$ 1299 ~ 1499

• Place of origin:  

  United States

standard (FSTD):Fast tracking (TRK):0.1 mm (0.0005 ft)1 mm (0.005 ft)1 mm (0.005 ft)10 mm (0.01 ft)Measuring time:Arithmetic mean value (D-bar):Standard measurement (STD):Fast standard (FSTD):Fast tracking (TRK):Users decision3.5 sec.1.3 sec.0.4 sec.Light source: Infrared GaAs diodeBeam divergence:1.6 mrad (16 cm/100 m)(0.52 ft/328 ft)Atmospheric correction:-60 to 195 ppm continuously

[Related Keywords : Trimble 5601, Total Station, GPS System, Surveying]

Hot Runner Heating Oil Mold Temperature Controller for Injection Mold

• Min. Order:  

  1 Unit

• Price:  

  US$ 500

• Place of origin:  

  China

• Supply Ability:  

  3000sets per month

continuity and high efficiency. ▪ Digital timing for 24 hours a week to realize automatic operation. 02 Siemens Electric SIEMENS electrical parts ensures stable running and liability of the machine. 03 Water Pump Adopted with high efficiency water pump. It can keep accurate temperature level and it is adaptable for production with precise molding. 04 Heating Wire Using SUS304 seamless heating

[Related Keywords : oily temperature control, temperature controller]

1500W LightWelder Portable Laser Welding Machine

• Place of origin:  

  Korea

Lightwelder handheld laser welding machine wire diameter support 0.8mm 1.0mm 1.2mm 1.6mm wire Wire send and back speed adjust through touch panel. If two weld metal gap more than 0.2mm that need filler wire. Weld method Flat position weld Horizontal position weld Vertical position weld Overhead position weld TECHNICAL PARAMETERS Model number: HS-HW1500 HS-CH1530 Working Area Continuous light o

[Related Keywords : laser welding machine]

GRP Water Tank(Grp Panel Tank)

continuous strand fibreglass, adding resin and then submitting the mixture to pressure before the final moulding process. The SMC method used by all other panel tank manufacturers mixes short-chopped strand fibreglass and resin in a "clay-like" mixture. In terms of product characteristic, this means that panels manufactured under our GRP method are not only thinner and lighter, but the long conti

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

Semiconductor Plastic Packaging Equipment / Photoelectric Semiconductor Packaging System

• Place of origin:  

  China

• Supply Ability:  

  negotiation

lights, tail lights, turn signals, fog lights, etc., which improves the brightness and energy efficiency of automotive lighting. Other fields: LED semiconductor plastic packaging equipment is also used to produce LED products in various fields such as LED signal lights, LED night lights, LED flashlights, LED street lights, and LED billboards. With the continuous development of LED technology and

[Related Keywords : LED Molding Equipment, Molding Equipment]

Induction Heating Equipment/Forging Machine/Brazing Machine

• Place of origin:  

  China

• Price Condition:  

  FOB

make your usage more freely; 5. Induction heating equipment is with special cooling cycle system, make sure the machine work continuously; 6. Various models,including Medium frequency,high frequency, Ultrahigh frequency, double frequency and so on. Power from 18 to 500KVA are all available. Please contact us for more details of Induction heating equipment(Forging Machine/Brazing Machine).

[Related Keywords : Indution Heating Equipment, Heat Treatment, Soldering, Anneal]

MOSI2 Heating Elements

• Min. Order:  

  10 Piece

• Price:  

  US$ 10

• Place of origin:  

  China

• Price Condition:  

  EXW DALIAN

• Supply Ability:  

  50000

continuously oxidizing .When he element temperature is higher than 1700 degree . the sio2 protective film will be fused because its fusing point is 1710 degree and the sio2 is fused nto molten dropa owing to the action of its surface extension ,whic cause losing its protective ability . In the oxidizing atmosphere, when the element is continuously used , the protective film forms again . It shou

[Related Keywords : mosi2 heater, mosi2 super heating element, kanthal super, ceramic heater]

Gypsum Wall Panel Production Line

• Place of origin:  

  China

continuously promote technological innovation and development. Summarize: Gypsum wall board production line is a mechanical and equipment with high efficiency, accuracy, stability, time -saving, multi -functional, multi -functional, energy -saving and environmental protection, wide range of scope, high accuracy, easy operation, convenient maintenance, safe and reliable, and high degree of automat

[Related Keywords : Panel Production Line]

Fully Automatic Solar Laminator

• Min. Order:  

  1 Unit

• Price:  

  US$ 200000

• Place of origin:  

  China

• Supply Ability:  

  Monthly production capacity of more than 40 units

continuously without interruption, which improves production efficiency and reduces downtime. Solar module lamination can also laminate multiple sheets simultaneously, further enhancing their efficiency. Consistent Quality: Fully automatic laminator can produce consistent results, ensuring that the laminated solar modules meet the required specifications and are of the highest quality. Reduced La

[Related Keywords : vacuum laminator]

Metal Baler Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

metal baler machine https://www.scrapcrusher.com/metal-baler/metal-baler.html QIANSEN Metal Baler Metal baler is mainly used for a variety of light and thin plastic black and non-ferrous metal waste cold beam block packaging, so that it forms a tight rectangular package, easy storage and transportation, is the ideal equipment for steel mills, non-ferrous metal plant, smelter metal waste treatment

[Related Keywords : metal baler machine, scrap metal baler]

Customized Industrial 6 Axis Robot Arm Collaborative Cobot for Automatic with Simple Programming Ope

• Min. Order:  

  1 Set

• Price:  

  US$ 6500

• Place of origin:  

  China

• Supply Ability:  

  2000

light and compact with characters of easy installation, visual recognition, and excellent equipment compatibility. Good versatility and flexibility make IlMT Cobots achieve plug and play. rapid deployment in many production lines. For small batch. multi-batch customization, short cycle and other production needs perform excellent application. DRAG AND GRAPHIC PROGRAMMING Manually drag the robot t

[Related Keywords : cobot, cobot arm, 6 axis robotic robot]

Cutting Aluminum Extrusion

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

uses a continuous band blade to cut the aluminum extrusion. Band saws are ideal for cutting long lengths of extrusion and are often used in production environments. CNC cutting: This method uses computer numerical control (CNC) technology to precisely cut aluminum extrusion to the desired length. CNC cutting is ideal for complex shapes and profiles and provides high accuracy and repeatability.

[Related Keywords : cutting aluminum extrusio]