Min. Order:
1 Set
Price:
US$ 20000
Place of origin:
China
Supply Ability:
100 sets per year
conversion efficiency; Energy saving 15%-30% , compared to SCR/KGPS technology 2.Much more efficient than gas-fired and coal-fired method 3.100% start-up success rate; power factor > 95% 4.Perfect and complete protection functions, increasing machine's reliability & stability 5.No special foundations required, Low operating cost, Easy operation. 6.Modular design, ease of maintaining and repai
[Related Keywords : steel bar heat treatment, long bar heat treatment, rebar heat treatment line]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
conversion efficiency more than 97.5%: IGBT(Insulated Gate Bipolar Transistor)inversion technology. 7. Energy saving up to 15%-30% compared with SCR technology induction machine: LC series resonance circuit and voltage feedback design, low energy comsumption. 8. Cooper & stainless steel fasteners and radiator, better cooling and anti-electrolysis. 9. Integrated design with water cooler, inductor,
[Related Keywords : Heating Machine]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
conversion speed regulating motor: 3KW Transformer capacity 220KVA*3 Machine weight: 2.2t or 2.8t3.2t Welding speed 25~35 (row/min) Auxiliary equipment: two straightening and cutting machines, straightening steel bars with diameters of 3.5mm~6.5mm or 4-8mm. Coal mine support mesh welding machine wholesale Special specifications according to customer requirements customized! More information: http
[Related Keywords : Automatic net winding machine, Wire Mesh Machine, mesh welding machine]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
15 Bag
Price:
US$ 85
Place of origin:
China
Conversion GmbH, Berlin, Germany, formerly known as AEG, AEG Daimler Benz, and AEG Cegelec. In order to use the ibaLink-SM-128V-i-2O board in this system, a modified version with a 16 bit VME backplane connector is required. The backplane of the lower system has a PMB bus in the rack. The engineering instructions for SM128V and ALSPA CP80/A800 (Logidyn D) can be found on the next page. You will f
[Related Keywords : SYN5201A, 3BHB006714R0217, SYN5201A-Z V217 3BHB00671]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
and wood board, etc. Low investment, suitable to small sized processing enterprise. Features: Rectifying feeding, speed adjustable, coating, laminating, conveying and sizing. It’s easy to operate and convenient to maintain. Lamination width 0-1300 Thickness of the sheet 5---30 Machanical speed : 15m/min Speed Regulation Frequency conversion synchronous speed regulating installed power: 4KW
[Related Keywords : single side laminating machine, double side lamination machine]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
conversion. After three stages of catalyst reaction, the conversion rate is 95%; the primary conversion gas is cooled down by heat exchange and then put into the dry absorption section absorption tower for absorption. The gas heat exchange equipment is scaled tube high efficiency heat exchanger. In order to regulate the inlet temperature of the catalyst layer in each section, necessary sub-lines
[Related Keywords : Acid Production System]
Business Type
Manufacturer
Location
Hunan, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
Korea
conversion rate. Wobble welding heads are designed to provide the highest laser power handling capability in the industry in a completely sealed and lightweight package. These process heads provide effortless integration with HS lasers and offers improved weld quality and better visual finish. Available in multiple configurations with the broadest focus and collimator lens options, the Wobblersar
[Related Keywords : LASER WELDING]
Business Type
Manufacturer
Location
Chungcheongbuk-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
conversion relationship between the rolling bending machine, that is, the conversion relationship of the machine's working capacity, is provided to the user in the random manual so that the user can use and select the roll plate bending machine more reasonably. How do you use a plate roll bending machine?? Sheet bending roller machine operation: standard use process. This machine is a three-rolle
[Related Keywords : Plate Bending Machine]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
conversion controls the feeding amount and speed, and the patented technology does a good job in the protection of the furnace head and tail, effectively preventing the phenomenon of blockage and leakage. According to the annual processing capacity of a single line from several thousand tons to 15,000 tons, it mainly includes feeding, drying, regeneration, tail gas incineration, desulfurization a
[Related Keywords : Activated carbon, Activation Furnace, Regeneration Equipment, Activated Carbon Recovery]
Business Type
Supplier
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Unit
Price:
US$ 200000
Place of origin:
China
Supply Ability:
Monthly production capacity of more than 40 units
line silicon solar cells have a photoelectric conversion efficiency of about 17%, the highest up to 24%, which is the highest in all kinds of solar cells, but the production cost is so high that it is not widely used in large numbers. Most solar panel equipment suppliers offer a 25-year warranty on mono-crystalline silicon because it is typically packaged in toughened glass and waterproof resin.
[Related Keywords : vacuum laminator]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 6500
Place of origin:
China
Supply Ability:
2000
lines. For small batch. multi-batch customization, short cycle and other production needs perform excellent application. DRAG AND GRAPHIC PROGRAMMING Manually drag the robot terminal to the corresponding points, the robot arm learns and remembers autonomously to complete programming. Even the zero-based users can easily demonstrated with the free-drag programming.New program can be timely turned
[Related Keywords : cobot, cobot arm, 6 axis robotic robot]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Video
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
Italy
Price Condition:
FOB
line for automatically tracing the outline of images, Autopunch for automatic conversion of images into embroideries, Photo Embroidery for automatic transformation of photographs into embroideries, AtEmbroidery for publication of embroideries on Web pages, Archive for the creation of paper catalogs, Stitch Outline for determining the outlines of any embroidery, Name Drop to repeat the same embroi
[Related Keywords : embroidery software, embroidery punching, true type lettering embroidery, free trial embroidery software]
Business Type
Manufacturer
Location
Udine, Italy
Employees Total
6 - 10
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
line can be fully automatic and semi-automatic conversion, scientific and reasonable design, compact, high degree of automation. 2. The system adopts "OMFO" system PLC to control the whole process of the production line, the control system with Lc as the main controller, using the human-machine interface for parameter setting and the control system is based on PLC as the main controller, using th
[Related Keywords : Anodizing Machine]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
US$ 2425 ~ 4245
Place of origin:
China
Supply Ability:
300
line with the requirements of the customers. 3. High adaptability of power: Can be used in 3-phase 260V-450V, suitable for field operation 4. High coherence, and function stability: Adopting the best apparatus and components, the set of welding parameter and control to welding are both realized over the software, avoid the aberrance, distortion of simulation signal, reduce the interference of oth
[Related Keywords : All-Digital, Welding Machine, CO2 Welding, MAG]
Business Type
Manufacturer
Location
四川, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
conversion. Hydraulic pump: 4Kw. For materials weighing up to 12 tons, KINGREAL has created an uncoiling trolley that can finish the rewinding process. 2. High-speed slitter component The most crucial component of the entire production line for slitting machines is the slitting parts, the caliber of which directly affects the caliber of slitting. To create the 10mm-thick slitting blade, KINGREAL
[Related Keywords : Slitter Rewinding Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
5000 Set
Price:
US$ 400
Place of origin:
China
Supply Ability:
5000 sets/month
linear feeders generally use hydraulic or electric methods to drive conveyor belts and transport materials from one location to another. In terms of control system, the linear feeder adopts PLC control, frequency conversion control, position control and other methods to achieve precise control of feeding speed, position, direction and other aspects. Application： Linear Feeders are widely used i
[Related Keywords : Linear Feeder, Linear Feeding]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 20000
Place of origin:
China
conversion module, etc. PLC as the core of the whole control system arithmetic processing, in accordance with the process parameters set by the touch screen is responsible for the monitoring of the entire machining process, through the digital-to-analog conversion module to complete the real-time control of the electro-hydraulic proportional valve, to achieve the control of the stroke position of
[Related Keywords : Ring, Ring Rolling Machine, Beraing Ring, Gear Blank]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Recommended Content
