Min. Order:
1 Unit
Price:
US$ 100000
Place of origin:
Korea
compared to the general case. 3) The difinition of harmonic The voltage supplied from the power plant is a hige quality sinusoidal wave with little distortion. However, the current is distorted by the nonlinear load present in the power system, which is expressed as an even multiple of the fundamental wave frequency of the power system, and this the waveforms are called harmonics and are expresse
[Related Keywords : ECO HYBRID TRANSFORMER]
Business Type
Supplier
Location
Busan, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 20000
Place of origin:
China
Price Condition:
FOB Tianjin
Supply Ability:
100 sets per year
Current 240A Input Cooling water pressure ≥0.1MPa Size(mm) 840*870*1840 Features 1.This induction heating system is suitable for heating medium or large size billet 2.IGBT inversion technology 3.LC series resonance 4.Reduced Operating Cost 5.High energy conversion over 97.5% 6.High power factor 0.98 7.Energy saving 15%-30% compared with SCR technology 8.High efficiency over 90%; 100% duty cycle
[Related Keywords : steel bar forging heating, Aluminum bar heat furnace, steel bar heat treatment]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
current and high power factor, Power factoer remaining 0.95 above during machine running. 3. Low energy consumption: in series resonant circuit,voltage at inductor high and current low so energy loss is very low; Soft switch technology applied then switch loss is very low. 4. Water cooled by heat exchanger: Using distilled water as circulating water to avoid sediment and clog of hose. 5. Good rel
[Related Keywords : Induction Heating Machine]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
current as well as flow path suddenly expand caused by complex and irregular flow phenomenon, which brings the medium flow, high efficiency in addition, guide wing cage type valve can be unstable fluid efficiently sleeve around the into the sleeve, due to these features, the CV3000 series valve with the original V series valve compared with a 30% increase in CV, and the adjustable ratio was enlar
[Related Keywords : control valves]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Unit
Price:
US$ 5000 ~ 20000
Place of origin:
China
Product DescriptionDouble Effect ConcentratorApplication: The equipment is suitable to concentrate Chinese traditional drug, western drug, dextrose, amylum, monosodium glutamate, food and milk products, and chemical materialsIt is especially suitable to concentrate thermal sensitive materials under low temperature and vacuum.After our improvement on the design, the current model has more advantag
[Related Keywords : Evaporator, Concentration Tank, Double Effect, Pharmaceutical]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
4 Barrel
Price:
US$ 585
Place of origin:
China
compared to the expected output drive state. If there is a mismatch, the channel is marked as "BAD". FBM provides both single and redundant operation modes. When redundant, a pair of FBM240 has a redundant adapter to a universal terminal component (TA). The 8-channel relay output supporting TA is designed to use 8 input channels as output relay contact monitors to read back signals. W
[Related Keywords : PFSK160A 3BSE009514R1]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
Comparing with other biomass raw materials, the bagasse contains around 20% lignin, which can help the pellet forming. Meanwhile, the bagasse pellet has higher calorific value at 4461 kilocalorie per kilogram (kcal/kg) (or 4.5 kilowatt hours per kg), and lower ash content at less than 6.4%, compared with other biomass pellets. Bagasse PelletRice Husk PelletCorn Straw PelletsTotal Moisture3.5%14%1
[Related Keywords : pellet mill, pellet machine, sugar cane bagasse, bagasse pellet]
Business Type
Manufacturer
Location
Henan, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
current (AC) that creates an electromagnetic field. Induction Coil: This coil, made of copper or other conductive materials, is designed to fit around the part being hardened. When the AC current passes through the coil, it generates a magnetic field. Cooling System: To ensure the part is properly quenched, a cooling system is integrated into the machine. It typically involves a water or oil-base
[Related Keywords : Hardening Machine]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Piece
Price:
US$ 100
Place of origin:
China
current government strategy. How is advertising printing fabric printed? Advertising printing is to distribute the ink on the coating surface according to the output rules of the picture system through the ink absorption layer on the product surface and the imaging principle system of digital inkjet printing, and finally complete the presentation effect of the picture information. What types of f
[Related Keywords : advertising fabric]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
current to each pixel on the screen. This results in a high-quality image that is sharp, clear, and easy to see, even in bright sunlight. The TFTs are made up of a thin layer of transistors that are deposited on the glass substrate of the display. The transistors act as tiny switches, controlling the flow of current to each pixel on the screen. Advantages of TFT Displays TFT displays offer severa
[Related Keywords : Visual Technology]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
5 sets per months
current induction feeding mode is adopted, which is more suitable for the crushing of solid materials; 1.2) The maintenance cost is greatly reduced compared with the double shaft shredder; 1.3) It is easy to maintain, no need to disassemble the motor, reducer and rotor to replace the blade; 1.4) The shredder has three control modes: manual, automatic, and pulse pushing. A variety of pushing metho
[Related Keywords : Small Cable Granulator]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
Italy
Price Condition:
FOB
Visit Millennium III web site Download 30 days trial version in ours web site MILLENNIUM III The software able to satisfy any work and budget requirement! Entirely designed and developed by Proel, Millennium III is one of the most powerful and complete embroidery software packages currently available on the market. The use of avant-garde programming techniques and the experience acquired over mor
[Related Keywords : embroidery software, embroidery punching, true type lettering embroidery, free trial embroidery software]
Business Type
Manufacturer
Location
Udine, Italy
Employees Total
6 - 10
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
Korea
comparator module Voltage/current measurement module, Load cell module Acceleration sensor Module, Renewable energy sensor module CdS sensor module, Photo diode module, Photo transistor module Transmissive photo sensor module, Reflective photo sensor module Mirror reflective photo sensor module, Optical fiber sensor with amplifier module Hall sensor module, Hall IC sensor module, Thermistor(NTC)
[Related Keywords : Robotics, Sensor Trainer, Electronics, Trainer]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 8000
Place of origin:
China
Supply Ability:
10000
H901 series high performance current vector inverter Type：Single Tube IGBT（0.75-11kW）(on sale) Module IGBT（11-55kW） Power range：0.75~55KW Voltage level: three phase 380V The H901 series is a software upgrade of the A901 without changing all hardware, and has the following functional highlights: Automatic constant voltage technology: Under the same power conditions, the H series can k
[Related Keywords : converter inverter]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
currently produced by EZHONG. Why Choose EZHONG Plate Leveling Machine? The CNC plate leveling machine is the first of its kind and has been widely used in industry. It has the characteristics of advanced technology, high leveling accuracy, wide process range, high degree of automation, and reliable and stable work under high strength. During the roll leveling process, the metal plate After a ser
[Related Keywords : Plate Leveling Machine]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
100 Set
Price:
US$ 300
Place of origin:
China
compared to machining prototypes, 3D printing is inexpensive and quicker at creating parts as the part can be finished in hours. Print on Demand Print on demand is another advantage as it doesn't need a lot of space to stock inventory, unlike traditional manufacturing processes. This saves space and costs as there is no need to print in bulk unless required. Flexible Design custom 3d printing ser
[Related Keywords : 3D Printing]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
current unique advanced technology. The original hanging method of the fiber structure furnace lining heating element is the method of using the positioning metal piece to extend from the steel structure of the furnace shell into the furnace with a metal element rod and a porcelain sleeve, so that under the high temperature in the furnace, the metal positioning piece has a large impact. A part of
[Related Keywords : furnaces, Oven, anneal furnace, heat treatment furnace]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
 |
Recommended Content
