Specified Wholesale

China FUYI Mineral Oil Impurities Decanter Centrifuge Oil Water Separator

• Min. Order:  

  1 Set

• Price:  

  US$ 12800

• Place of origin:  

  China

specified by our customers for free inaccordance with the mode of transportation. 8. Our company will provide perfect after-sale services and technical support. Hot line: 8618104024665 (whatsapp) Skype: live:molly3469 FAQ Q1: Where is your factory? How can I visit there? A1: Our factory location is Liaoyang City , Liaoning Province, China.If want to visit our company , you can fly to ShenyangTao

[Related Keywords : Oil Water Separator, Drilling Waste, Fish oil centrifuge]

Central Controller Module UAD155A0111 3BHE029110R0111

• Place of origin:  

  China

specified timer cycle, or a timeout will occur. a. User jumper allows timeout, resulting in reset. Independent for 　　jumpers, software can enable watchdog timeout causing non sliding interrupts (NMI) or VME bus SYSFAIL. 　　Non volatile SRAM - VMIVME-7750 provides 32K bytes of non volatile SRAM. The content has been removed from the unit when the+5V power supply is interrupted. PMC Expansio

[Related Keywords : UAD155A0111, 3BHE029110R0111]

Mechanically Actuated Brakes KBM1 Pneumatic Caliper Brakes KB1 Spring-loaded Brakes KBS1

• Min. Order:  

  5 Unit

• Price:  

  US$ 120~130

• Place of origin:  

  China

• Supply Ability:  

  500

torque = F*(disc radius in m-0.024)=Nm Max total wear: 6 mm Thickness of new lining: 5 mm Continuous thermal capacity Qc: 1kW Minimum release pressure: 4.5bar The torque values specified are obtained with no.3 springs for KBS1-1 no.4 springs for KBS1-2 The diagram shows the torque variation for each millimeter of linings wear. Adjust according to ensure the correct torque value is achieved.

[Related Keywords : Brakes KBM1 KB1 KBS1, Pneumatic Caliper Brakes, Mechanical Operated Brake, Spring-loaded brakes]

Hydroxyethyl Methyl Cellulose HEMC

• Place of origin:  

  China

Specification of Hydroxyethyl Methyl Cellulose HEMC Project Index Methoxy Content (%) 22.0-32.0 Gel Temperature (°C) 70-90 Ash (WT%) ≤ 3.0 Residue On Ignition (WT%) ≤ 5.0 Moisture (﹪) ≤ 5.0 Viscosity (mpa.s, 2% solution, 20°C) 5-200000 Loss On Drying (WT%) ≤ 5.0 PH Value (1% solution, 25°C) 4.0－8.0 Dissolving Method of Hydroxyethyl Methyl Cellulose HEMC 1. Add a specified amount of

[Related Keywords : HEMC cellulose]

CNC Milling Service

• Min. Order:  

  1 Set

• Price:  

  US$ 1 ~ 2

• Place of origin:  

  United States

specified design parameters. CNC milling service enables the production of complex parts with tight tolerances and intricate geometries, making it ideal for prototyping, custom fabrication, and high-volume production runs. Its versatility allows for the creation of prototypes, tooling, molds, and end-use parts across a wide range of industries, including aerospace, automotive, medical, and electr

[Related Keywords : CNC Milling Service]

CNC Machine ToolSingle-Chip Microcomputer Control System

• Min. Order:  

  1 Parcel

• Price:  

  US$ 1

• Place of origin:  

  China

• Supply Ability:  

  2,500 sets per year

specified codes; 5. The control radius reaches up to 10M; 6. It has the instruction code input port; 7. It has the automatic protection function of power off and broken wire; 8. It has the auto power off function after machining. More information: http://www.moiminerals.com http://www.autoaccessoriessite.com http://www.pcheauv.com http://www.rfillumination.com http://www.voipbusinesslist.info htt

[Related Keywords : machine tool control system]

FFC Laminating Machine, Shielding M/C, Tab Creating M/C, Wrapping M/C, Folding M/C

• Place of origin:  

  Korea

The automated FFC manufacturing equipment is designed to produce Flexible Flat Cable, consisting of a wire rack, the main body, a cable capstan, a winder, and other equipment options specified by our customers. The main body's primary components are a puncher and stiffener apparatus. The puncher forms a connector window, and the stiffener is placed on the punched portion of the cable to allow for

[Related Keywords : FFC Lamination Machine, Tab creating machine, Shielding machine, Folding Bending machine]

SF6 Recovery and Gas Refilling Device

• Place of origin:  

  China

• Price Condition:  

  FOB Shengzheng

• Supply Ability:  

  10 sets/month

specified operating pressure. I. Piping system Well designed in a vertical or horizontal way, with all connecting joints reliably fastened, well sealed to airtight and dust proof. J. Store vessel Designed, manufactured and checked in accordance with Chinese GB150-89 standards for compressed vessels; the vessel is clean inside without remaining particulates, with rust-proof treated inside and

[Related Keywords : sf6 gas reclamation, sf6 vacuum evacuating, sf6 gas refilling, sf6 recovery]

PU Timing Belt XL Open

• Min. Order:  

  1 Set

• Price:  

  US$ 1 ~ 2

• Place of origin:  

  United States

PU Timing Belt XL Open Description: A PU Timing Belt XL Open is a type of open-ended timing belt that uses polyurethane as its material. Each component of the name provides specific information: "PU Timing Belt" specifies that the belt is made of polyurethane, a material known for its durability, flexibility, and resistance to wear and abrasion. Polyurethane timing belts are commonly used in vari

[Related Keywords : Belt XL Open]

Casting Process Simulation Software

Z - cast Introduction Casting Process Simulation Software specified for Casting Process Analysis Tool for optimized casting process design and die design Total process simulation of metal's flow, filling, solidification Rapid and exact result for casting company Comfortable user interface based on all Window technology Applied field Sand mold casting : automatic casting line, green sand, CO2,

[Related Keywords : CAD, CAM, CAE]

Balancing Ambient Room

The room side capacity determination is made by balancing the cooling and dehumidifying effects, which a unit to be tested may create, with measured heat and water inputs of the reconditioning equipment to maintain the temperature and humidity condition as specified in the relevant KS,JIS and ASHRAE Standard. The outdoor side capacity is measured by balancing the heat and water rejection on

[Related Keywords : balancing ambient room]

EN 12195-3 Load Binder

• Place of origin:  

  China

• Supply Ability:  

  20000T

Zhonghe EN 12195-3 self load chain binder is a type of load binder winch designed to meet the requirements of the European standard EN 12195-3, which specifies the guidelines for the use of load binders in the transportation industry. Zhonghe EN 12195-3 selfloadbinder is designed for use with lashing chains to secure loads on road vehicles. It is constructed from high-quality materials to ensure

[Related Keywords : self load chain binder]

ST9605 Oxygen (Air) Bomb Ageing Chamber

• Min. Order:  

  1 Set

• Price:  

  US$ 1888

• Place of origin:  

  China

ST9605 Oxygen Bomb (Air) Aging Chamber Standard: According to IEC 60811-1-2, GB/T 2951.2-1997 and IEC60335.1-2004: 22.32, GB4706.1-2005 etc Range: This machine applies to aging test for electrical wires & cables & rubber jacket& plastic & artificial leather, and other macromolecule materials. (Aging test via oxygen and compressed air in specified pressure and temperature) . Technical Parameters:

[Related Keywords : Air Bomb Ageing Test, IEC60811 Air Bomb, Air Bomb Test]

Electronics Manufacturing & Assembly Service

• Min. Order:  

  100 Set

• Price:  

  US$ 300

• Place of origin:  

  China

specified in writting, any changes are made through a secure approval process. Extensive Expertise We have more than 10 years experience in contract manufacturing. We have comprehensive expertise and extensive project experience. GreensTone always has good performance in complex manufacturing, we have expertise in electronics components,expertise team in plastic/metal/cable parts,expertise team i

[Related Keywords : printed circuit assembly]

1200 SiC Heater, Electric Furnace Heating Element

• Place of origin:  

  China

Type:SiC HeaterApplicable Industries:Energy & MiningFeature:Large Specific ResistanceCertification:ISO9001:2008Working Temperature Range:700 - 1450 ℃Volume Density:5.5-5.6g/cm3Porosity Rate:7.4%Length:50-4300mmHigh Light:700C SiC Heater, 4300mm SiC Heater, 4300mm Silicon carbide Heater 1200 ℃ SiC Heater, Electric Furnace Heating Element Electrical properties of SiC Heater Silicon carbide has

[Related Keywords : electric, furnace]