Place of origin:
China
Plates: protect the pump body from wear and extend the service life of the equipment. Mechanical Seals: ensure leak-free operation under high pressure and high temperature environments. Bearings & Bushings: ensure smooth, low-friction shaft rotation to maintain continuous operation of the pump. Shaft Sleeves: Provides corrosion and wear resistance, extending the service life of the pump shaft. Pe
[Related Keywords : Pump Spare Parts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Place of origin:
China
Price Condition:
FOB negotiation
Supply Ability:
over 10000 pumps a year
plate of the slurry pump. At present, the front guard plate of slurry pump is generally made of wear-resistant alloy, rubber, ceramics and polyurethane. The alloy has high hardness and good wear resistance, but poor corrosion resistance. Ceramics have high hardness, wear resistance and corrosion resistance, but they are brittle, so they are difficult to be used in slurry pump. In addition, the ef
[Related Keywords : Desulphurization Pump, slurry pump, dredger pump, pump spare parts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Min. Order:
1 Set
Price:
US$ 2200
Place of origin:
Korea
Supply Ability:
500sets/month
Flutek Kawasaki K3VL Series swash plate type axial piston pump is a heavy duty variable displacement hydraulic pump newly developed for mobile and industrial applications. The K3VL pumps are based on the proven design of the K3V and K3VG pumps whereby the controls and general construction have been optimized for load-sensing and pressure -constant requirements. Special Features 1. Reduced Pressur
[Related Keywords : Kawasaki Piston Pump, Flutek-Kawasaki, Hydraulic Pump, Main Pump]
Business Type
Supplier
Location
Gyeongsangnam-do, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
addition to their use occasions, water inlet and outlet conditions, and characteristic parameters: Installation method of axial-flow pump and mixed-flow pump Axial flow pump installation method is divided into:vertical installation, inclined installation, horizontal installation, floating installation Vertical installation is the most common installation method at present, the installation condit
[Related Keywords : Pitshaft Axial- flow Pump]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
501 - 1000
Annual Revenue
More than 100,000,000
Place of origin:
China
plates are supplied with various steel, plastic or ceramic qualities. For additional operation safety the Safety valve for over pressure protection can be added. Features of Accuvon Rotary Lobe Pumps: 1.Self-priming, Valve-less, Positive Displacement Pump 2. Easy Maintenance through Front Cover 3. Controllable Flow, Ratio up to 1 : 5 4. Capacity of up to 3200 m³/h 5.Pressures of up to 25 bar 6.
[Related Keywords : Rotary Lobe Pump]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 250 ~ 2900
Place of origin:
China
addition to the above applications, the XD series vacuum pumps can be available other applications, such as: 1. To increase the amount of the pumping gas and to improve the vacuum degree, please combine with Roots pumps to form a unit for this. 2. If pumping moist air or condensable gas, the condenser can be installed before the vacuum pump and the gas ballast valve is installed on the vacuum pum
[Related Keywords : pump, oil pump, vacuum pump, rotary vane vacuum pump]
Business Type
Supplier
Location
Shanghai, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Supply Ability:
500 sets per month
plate, frame plate), and its material is usually HT200 or QT500-7. The inner casing can be made of high chromium alloy cast iron (including volute, Throatbush, FPL insert and impeller) , Or made of rubber(Including cover plate liner,frame plate liner and impeller etc). 3. The front and rear cover plates of the impeller are equipped with auxiliary blades to reduce leakage, balance the axial force,
[Related Keywords : ZJ Slurry Pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 620
Place of origin:
China
Supply Ability:
500sets/month
addition to the above applications, the XD series vacuum pumps can be available other applications, such as: 1. To increase the amount of the pumping gas and to improve the vacuum degree, please combine with Roots pumps to form a unit for this. 2. If pumping moist air or condensable gas, the condenser can be installed before the vacuum pump and the gas ballast valve is installed on the vacuum p
[Related Keywords : oil pump, Rotary Vane Vacuum Pump, vane pump, XD pump]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
plated. There are several weld spots on each hinge. These weld spots are helpful to form a smoother and stronger area after clamps are welded onto drum lock rings. The hole design on handle and bridge design on hinge allow a T seal to go through, which provides additional protection to the closing system. Specification of drum locking clamps Size LC75, LC95, LC120, LC158, LC187, LC187L, LC250 Mat
[Related Keywords : Drum Locking Clamps]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Competitive plating additives products from various plating additives manufacturers and plating additives suppliers are listed above, please select quality and cheap items for you.
Recommended Content
