Place of origin:
China
Mission Magnum XP Pump Spare Parts 12x10x23 24027-02-30 The Mission Magnum XP Pump is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. All pump wear parts are made of high chrome alloy, high abration resistance. Advantages of Our Pump Spare Parts Wide compatibility: Our pump spare parts are suitable for a variety of pump models and are
[Related Keywords : Pump Spare Parts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 435~450
Place of origin:
China
Supply Ability:
500set/month
suited to deliver high-viscosity mediums very much. 3. Steady delivery without pulsation, little vibration and low noise. 4.The same rotary direction of the internal rotor and outside rotor results in little wear and long operation life. 5. If selecting proper parts material, this gear oil transfer pump can deliver a variety of corrosive mediums and the working temperature can reach 300℃.
[Related Keywords : gear pump, gear pump for oil]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
United States
PD430-1 PUMP DRIVE PARKER/DENISON This unit was removed from caterpillar C-32 1300 BHP Unit. Unit Working hours 5000 mostly ran at idle over 4000 idle hours Rubber coupling need replacement All accessories bolts and flywheel coupler included. To suit SAE 01. • POWER: 1500 HP max input 900 HP max per output • MAX INPUT / OUTPUT SPEED : 2200 / 2600 rpm • MAX TORQUE: Input: 3600 lb-ft Per
[Related Keywords : Pumps, Hydraulic Pump, Parker/Denison Pumps, PD430-1]
Business Type
Supplier
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 700 ~ 2000
Place of origin:
China
Description: Vertical Sump Pumps are designed for every other tank, pit or hole-in-the-ground slurry handling situation, ZP pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters. Vertical Slu
[Related Keywords : slurry pump, vertical slurry pump, sump pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance. Crafted with precision and durability in mind, our heavy duty slurry pump is design
[Related Keywords : Slurry Pump, Pump Parts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Milliwatt
Price:
US$ 1
Place of origin:
China
rubber outer liner. They are suited to transport abrasive slurry. Material: Metal or Rubber total heads: 4 to 40m Discharge size: 40 to 300mm More information please view: http://www.cworldind.com/ More information: http://www.moiminerals.com http://www.autoaccessoriessite.com http://www.pcheauv.com http://www.rfillumination.com http://www.voipbusinesslist.info http://www.isubmitnow.com
[Related Keywords : centrifugal slurry pumps, slurry pumps]
Business Type
Supplier
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
WD+ ENERGY PORTABLE DIESEL CAST IRON HIGH PRESSURE WATER PUMP SELECTION SHEETFeatures:·Powerful commercial level WD+ 4-stroke gasoline engine with low vibration, low CO & NO emission;·Suit for 50% hardenite dirty water,mud slurry;such as building operation, emergency road repair exhaust and so on; also could use as clean water pump. SPECIFICATION&SELECTION SHEETModelWD50DCWD80DCWD100DCTypeSelf-
[Related Keywords : WATER PUMP, YD Generator Sets, HIGH PRESSURE WATER PUMP]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 12111~12314
Place of origin:
China
Supply Ability:
200sets per month
suit installations and applications 2,Main Features: a) The frame plates have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber. The frame plate liner and impeller for HH pump are adoptable of hard metal only. b) Bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, being removed co
[Related Keywords : slurry pump, mining slurry pump, centrifugal slurry pump, mining water pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
suited to high press- ure jet drilling for increasing penetration rate,and it can also supply flowing drilling fluids for downhole motors to drive the downhole drilling machines and downhole tools. ???3NB series mud pumps are composed of the power end and the fluid end.The power end includes the following parts such as:frame,a drive shaft,a driven shaft,a transmission shaft of lubricating oil pu
[Related Keywords : mud pump, BOP, diesel engine, F-mud pump]
Business Type
Supplier
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Barrel bungs plastic bung is G2 and G3/4'' plug type with ISO-228 thread, can well suit into drum flange on 55 gallon steel drums. It is a substitute for zinc plated drum plug in some cases. Whatever the material is, the bungs are aiming at reducing the risk of spillage and keeping the contents safe The included 2'' and 3/4'' bung fittings make filling and dispensing easy and convenient, the plug
[Related Keywords : Steel Drum Plastic Bung]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
20 Set
Price:
US$ 35
Place of origin:
China
We have more than 10 yeas of motor manufacturing experience. The new developed water return pump has many advantages than others. 24V DC, safety and reliability. No electricity shock, No water leaking, risk-free. Wide rang voltage input,High-quality power adapter, suit for 110-220V AC. More energy saving, save your money and environment-friendly. Sine wave technology, deep-sea silence experience
[Related Keywords : Submersible Pump, Circulating Pump, Variable Flow Pump, Return Pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
Italy
suit the excavator brand/model and the Dragflow Dredging Pump. Dragflow’s advanced pump design is focused mainly on the agitator, which enables the pumps to rise and convey liquids and mixtures with medium and high specific weight such as mud, slime, silt, sand and gravel with grain sizes up to 120 mm. As Pump Accessories, the pumps can be fitted with agitator cutters and water jet rings to
[Related Keywords : bentonite pump, slurry pump, piling contractors pump, bentonite slurry pumping]
Business Type
Supplier
Location
Abu Dhabi, United Arab Emirates
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
suitable for high power condition. √ Hardened stainless steel shaft sleeve with ‘O’ ring seals at both ends. A slip fit allows the sleeve protects the shaft from the wear and corrosion. √ The deputy vanes in both former and rear cover of Impeller relieve seal pressure and minimize recirculation. √ Casing is made of ductile iron, ribs help casing to stand high pressure. √ The wet parts
[Related Keywords : filter pulp pump, solid waste pump, Steel slurry pump, Mineral Sands pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 12
Place of origin:
China
Solenoid Valve Manifold combines many valves with multiple inlet-one or one inlet-multiple outlet. It can control each valve individually—the medium, including water, air, organic solutions, solid acids, bases, etc. The solenoid valve manifold is highly integrated, compact, lightweight, easy to install, and suitable for multi-reagent sampling. Also, the manifold can be customized to suit the cu
[Related Keywords : buy syringe pump]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
100 sets/ per Month
Vertical Sump Pump KV(R) KV & KVR series are vertical, centrifugal slurry pumps, designed for handling abrasive and corrosive slurries whilst submerged in sumps or pit. The pump has no shaft seal, easy to maintenance and cost less. Hard metal and rubber parts are optional for different applications and interchangeable. Suit for most applications where slurry pumps are needed. -Specifications D
[Related Keywords : vertical slurry pump, sump pump, centrifugal slurry pump, slurry pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 750
Place of origin:
China
Supply Ability:
500sets/month
suit different working conditions. Product Details Pump Specifications Application Our Services Pre-Sales Service Provide 24-hour reply. Provide suitable models according to clients' requirements. Provide detailed product specifications and reasonal prices. In-Sales Service Supervise whole production time. Provide product’s testing performance curve to customers. Provide inspection pi
[Related Keywords : rotary vane vacuum pump, vane pump, vacuum pump, oil pump]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 990~1200
Place of origin:
China
suit for all kinds of drilling sand pump application. Bare shaft pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.The model 10x8x14 and 8x6x14 centrifugal sandmaster pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud s
[Related Keywords : slurry pump, centrifugal pump, Mission sandmaster pumps, drilling sand pump]
Business Type
Manufacturer
Location
河北, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Piece
Price:
US$ 1000 ~ 3000
Place of origin:
China
Supply Ability:
300
suited to mild acidic duties where erosion resistance is required. • KmTBCr28(Extralloys®) is martensitic white iron with moderate erosion resistance.It has the main elements of Chrome 28%, low Carbon with hardness of 430 in Brinell, KmTBCr28 is a corrosion resistant white iron suitable for low PH corrosion duties, where erosive wear is also a problem. • KmTBCr35(Hyperalloys®) is a premium
[Related Keywords : slurry pump parts, impeller, gravel pump parts, Pump Spare Parts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Type KV & KVR are vertical, centrifugal slurry pumps, designed for handling abrasive and corrosive slurries whilst submerged in sumps or pit. The pump has no shaft seal, easy to maintenance and cost less. Hard metal and rubber parts are optional for different applications and interchangeable. Suit for most applications where slurry pumps are needed. ---Specifications Discharge diameters 40mm to
[Related Keywords : Vertical Spindle Pumps, Sump Pumps, Slurry Pump Supplier, Slurry Pump China]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Centimeter
Price:
US$ 10
Place of origin:
China
Tobee® 65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application. Wetted
[Related Keywords : gravel pump diesel, vertical sump slurry pump, sludge seed pump, Rubber lined vertical slu]
Business Type
Supplier
Location
河北, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Competitive suite. products from various suite. manufacturers and suite. suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
