Auto Meter. Wholesale

EHS Shore Durometer Hardness Tester Unit

• Min. Order:  

  1 Set

• Price:  

  US$ 100

• Place of origin:  

  China

EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore durometer gauge adopts high-precision displacement sensor and spring design with high test accuracy. Shore durometer tester or durometer meter has three measurement modes: maximum mode, maximum average mode, and timing mode; 500 measurement data can be stored as one type of hardness test instrument, and the measurem

[Related Keywords : EHS Shore Durometer Hardn]

100k - 10T Micro Signal Type Tester Resistance Capacitance and Inductance Tester

• Place of origin:  

  China

Automatically upgrade firmware by a diskSelectable Chinese and English operation interfacesHandler interface realizes on-line operationAchieve remote control by RS232C and USB Device interfaceFootswitch trigger functionBrief IntroductionWith touch, color LCD screen and unique insulation resistance/leakage current dual test function, TH2683A/TH2683B insulation resistance meter is an intelligent me

[Related Keywords : Electronic Component Test]

N.F.B Endurance Testing Machine

Specification Model : DEC-NE2000 Sample spec. Max 1200A Loading system : Pneumatic actuator system STD : Timer, Counter, RPM Meter Test sequency : Auto / Menu

[Related Keywords : Endurance Testing Machine]

ACP Electrical Current Transformer Test, CT/PT Analyzer

• Min. Order:  

  1 Set

• Price:  

  US$ 3500

• Place of origin:  

  China

• Supply Ability:  

  100 sets

metering CTs according to IEEE and IEC standards. Functions: CT(Current Transformer): 1. Excitation Characteristic Test 2. Auto Calculation of Knee Point Value 3. Auto 5% and 10% error curves, can measure ALF 4. Transformer Ratio Test 5. Polarity 6. Ratio difference measurement 7. Phase (angle difference) measurement 8. Primary Current Injecting 9. Withstand Test of Power Frequency Altern

[Related Keywords : current transformer test, ct analyzer, ct pt analyzer, transformer ct analyzer]

CDW-80T Low Temperature Impact Testing Meter

• Min. Order:  

  1 Set

• Price:  

  US$ 4000 ~ 8000

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  30 sets per month

ⅠBrief introduction CDW-80T-type low-temperature impact testing meter is the compressor refrigeration of the latest research and development in accordance with cooling requirement of GB229-2007 "metal Charpy notched impact test method". This equipment used cascade refrigeration compressor technology, the use of the principle of heat balance and mixing method of circulation to achieve uniformity

[Related Keywords : Low Temperature Impact Testing, Impact Testing Meter, Low Temperature Impact, Low Temperature tester]

IEC60529 Waterproof Testing Machine IPX12 Vertical Rain Drip Box

• Min. Order:  

  1 Set

• Price:  

  US$ 5600 ~ 10000

• Place of origin:  

  China

automatically complete the IPX2 test requirements: 4 positions respectively drip 2.5min. ● The sample power socket (AC220, 10A) is installed on the turntable, and the power on and off time of the sample power can be controlled by the program: power off (0-999min)-power on (0-999min)-power off (0-999min), it is applied to do live test. ● Equip with flowmeter, can accurately manual adjust the

[Related Keywords : ipx12 tester, ipx12 drip box, ipx1 test rig, waterproof test machine]

Ponovo PW41i Protection Relay Test Set Three-Phase Relay Protection Tester

• Min. Order:  

  1 Set

• Price:  

  US$ 1 ~ 25000

• Place of origin:  

  China

Automatic device.Synchronizer.Auto‐reclosing Power system simulation.Transient, permanent state fault simulation.Playback of COMTRADE format file Calibration0.5 Class energy meterDisturbance recorderIndicating meters, etc. Main Specifications Current Range 3 x 40A Power(typical) 3 x 400VA at 40A Accuracy (typical) 0.16% reading + 0.04% range Voltage Range 3 x 0~300V Power(typical) 3x 85VA at 30

[Related Keywords : protection relay tester, secondary relay tester, Three-Phase Relay tester]

Density / Specific Gravity Meter DA-650 / DA-645 / DA-640

• Place of origin:  

  Japan

• Price Condition:  

  FOB

Density / Specific Gravity Meter DA-650 / DA-645 / DA-640 Easy to check measurement cell No air bubbles, no contamination Beverages, foods, petroleum, pharmaceutical, alcoholic beverages, etc. DA-650 DA-645 DA-640 Measurement Method Resonant frequency oscillation Measurement Range 0 - 3 g/cm3 Measurement Temp Range 0 - 96°C (32 – 204.8° F) Accuracy*1 Density ±2 x 10-5/gcm3 (

[Related Keywords : Density Meter, DA-650, DA-645, DA-640]

SELL Coating Thickness Gauge CM-8826FN

• Place of origin:  

  China

• Supply Ability:  

  2000pcs per Month

Auto Power Off Metric / Imperial:Convertible Battery Indicator:Low Battery Indicator Operating Conditions:Temp. 0~40 °C, Humidity: 10~90 %RH Power Supply:4 x 1.5 V AAA (UM-4) Battery Dimensions:126 x 65 x 27 mm Weight:81g (Not Including Batteries) Accessories: Standard Accessories: 1. Main Unit 2. Probe (F Type / NF Type) 3. Calibration Base Set (F Type / NF Type) CTG-BS 4. Calibration Foils CTG

[Related Keywords : coating thickness meter, paint thickness gauge, car paint tester]

VICI VC6013 Digital Capacitance Meter

• Min. Order:  

  30 Set

• Price:  

  US$ 14.55

• Place of origin:  

  China

• Price Condition:  

  EXW Shenzhen

• Supply Ability:  

  3500 per month

Auto power off It will power off in 30 minutes if there is no measurement. Function protection √ Anti-shock protection √ Sampling rate 3times/s Operation method Manual range Max. display 1999 LCD size 65×41mm Battery 9V (6F22) Power dissipation Quiescent current approx. 3mA General characteristic: Color Body: dark grey, holster: orange (pantone No.：1495U) Weight 290g（including battery）

[Related Keywords : capacitance meter, capacitance tester, 3 1/2 capacitance meter, digital capacitance meter]

CDW-60 Impact Test Low Temperature Chamber / Environmental Chamber

• Min. Order:  

  1 Set

• Price:  

  US$ 3000 ~ 9000

• Place of origin:  

  China

• Price Condition:  

  FOB qingdao

• Supply Ability:  

  30 Sets per Month

Usages and characteristics: 1.CDW-60-type low-temperature impact testing meter is the compressor refrigeration of the latest research and development in accordance with cooling requirement of GB/T 229-2007 "Metal Charpy Gap Impact Test Method". 2.This equipment used cascade compressor refrigeration technology, the use of the principle of heat balance and mixing method of circulation to achieve un

[Related Keywords : Environmental Chamber, Low Temperature Chamber, Impact tester, Chamber]

Low Temperature Meter / Impact Testing Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 3000 ~ 8000

• Place of origin:  

  China

• Price Condition:  

  FOB qingdao

• Supply Ability:  

  30 Sets per Month

Usages and characteristics: 1.CDW-60-type low-temperature impact testing meter is the compressor refrigeration of the latest research and development in accordance with cooling requirement of GB/T 229-2007 "Metal Charpy Gap Impact Test Method". 2.This equipment used cascade compressor refrigeration technology, the use of the principle of heat balance and mixing method of circulation to achieve un

[Related Keywords : Low Temperature Meter, Impact Testing Machine, Low Temperature chamber, tester]

Testing Equipment for Glass in Building

• Min. Order:  

  1 Set

• Price:  

  US$ 6500~6525

• Place of origin:  

  China

• Supply Ability:  

  30 sets per month

meters: Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Impact Frame Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Drop Ball Impact Test Machine Determination of whether the safety glazing mat

[Related Keywords : glass tetsing equipment, glass testing, testing equipment]