Min. Order:
1 Set
Price:
US$ 5000 ~ 10000
Place of origin:
China
Supply Ability:
20sets/month
and reliability , the condensation method is air-cooled, and R404R environmentally friendly refrigerant is used. The entire system pipeline has passed the pressurized 48H leak test to confirm that the refrigeration system can operate stably for a long time . The casing heat exchanger is made of SUS316# stainless steel to prevent salt water corrosion; ● Flowmeter: A digital flowmeter is used to
[Related Keywords : splash test chamber, ice water splash tester, ISO16750-4 test chamber, ISO16750-4]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 8000
Place of origin:
China
and factory inspection of the product. Fully meets IEC60529:1989 +A1:1999 +A2: 2013 ,IEC60598-1, GB2423.37-89 (Test L: dust test methods), GB4208, GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB7000.1 9.2.1, 9.2.2 and Figure 6, DIN40050 and IP5K0. The dust test chamber is applicable to the IP5X and IP6X dustproof test. Product Model: Model NumberWorking Room Size (mm)RemarkWo
[Related Keywords : Dust Proof Chamber]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Twenty-Foot Container
Price:
US$ 3100
Place of origin:
United States
Supply Ability:
1
: C-scan flaw detection or thickness gaugingComposite material flaw detectionInvestment Castings Turbine bladesTube and Pipe Corrosion mappingStorage TanksBoilers GlassMetals, plastics, composites, glass, rubber ACCESSORIES : Various Transducer typesFull range of ScannersProtective carry case https://www.superindotech.com/flaw-detector/new-ndt-systems-raptor-flaw-detector---sale
[Related Keywords : NDT Systems Raptor]
Business Type
Supplier
Location
Jakarta Raya, Indonesia
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 1000 ~ 50000
Place of origin:
China
and motors. 2) Perform maintenance inspection on electrical equipment. 3) Monitor sudden natural environmental changes such as volcanic eruptions and landslides. 4) Detect overheating of the casing of the transformer, overload, loose joints, and poor blockage of the cooling pipes, poor contact, and unbalanced three-phase load. The application range of thermal imaging device is becoming more and m
[Related Keywords : ir thermography camera]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
and the purpose of detection. There are usually three types of coils: through a coil, probe coil and insert coil. It is mainly used for the rapid detection of metal pipes, rods and wires on production lines, and for the detection of large quantities of parts such as bearing steel balls, valves, etc. The main features of eddy current tester are: 1) The detection sensitivity of the surface of the c
[Related Keywords : ndt testing equipment]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
United States
and thicknesses. Olympus offers complete solutions for the inspection of carbon-fiber-reinforced polymer structures. These solutions are based on the OmniScan flaw detector, the GLIDER™ scanner, and dedicated probes and wedges designed for CFRP flat panel and radius inspection. Weld Inspection of Small-Diameter Pipes -When coupled with the COBRA manual scanner, the OmniScan flaw detector is cap
[Related Keywords : Olympus Omniscan MX2]
Business Type
Supplier
Location
Florida, United States
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
pipe by hydraulic tester. In the non-working condition, a gap exists between the seal and the surface of the steel pipe. During the test, hydraulic oil is applied to the surface of the seal ring. Then the ring is compressed and the surface of the steel pipe is tightly wrapped, and the test pressure can be performed. It is suitable for pressure test of steel pipe such as casing, oil pipe and natur
[Related Keywords : ultra high pressure seals]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
10 Set
Price:
US$ 1
Place of origin:
China
pipe by hydraulic tester. In the non-working condition, a gap exists between the seal and the surface of the steel pipe. During the test, hydraulic oil is applied to the surface of the seal ring. Then the ring is compressed and the surface of the steel pipe is tightly wrapped, and the test pressure can be performed. It is suitable for pressure test of steel pipe such as casing, oil pipe and natur
[Related Keywords : ultra high pressure seals]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Place of origin:
China
case with chrome-plated brass connectors Proprietary RF shielding for improved signal-to-noise characteristics in critical appliactions Applications• Automated scanning• On-line thickness gaging• High speed flaw detection in pipe, bar, tube, plate, and other similarcomponents• Time-of-flight and amplitude based imaging• Through transmission testing• Material analysis and velocity meas
[Related Keywords : immersion probe, ultrasonic transducer, ultrasonic testing, focused transducer]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Supply Ability:
2000 pieces per month
and machine manufacturing. *Measture the cast iron thickness,aluminum thickness,quartz glass thickness,PVC thickness,PE thickness,red copper thickness etc. Details: Display: 4 Digit, 10 mm LCD Operating Principle: Ultrasonic Measuring Range (metric / Imperial): 1.0~200 mm / 0.04~8 inch Battery Indication: Low Battery Indication Sound Velocity:500~9990 m/s Lower Limit Steel Pipes: Φ15 x 2.0 mm Φ
[Related Keywords : ultrasonic thickness gaug, digital thickness gauge, wall thickness meter, landtek thickness meter]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Competitive casing and pipe products from various casing and pipe manufacturers and casing and pipe suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
