Place of origin:
China
forces during transportation and use. 3.Bag style design: Portable design, equipped with a bag strap, convenient for staff to carry and operate on site, suitable for various industrial sites. 4.Fully intelligent control: Adopting advanced intelligent control systems, various operations during the calibration process are automatically completed, reducing human intervention and improving work effic
[Related Keywords : calibrator, pressure calibrator, calibration, automatic]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Box
Price:
US$ 5000 ~ 10000
Place of origin:
China
Supply Ability:
10
force vs angle" curve (as shown in Figure 1); 5． Calculate the data and generate the performance test report of closing force value according to EN 1154:1997+A1:2006,ANSI/BHMA A156.4:2019 (As shown in Figure 1) and test method and report for QBT2698-2016;; 6． set another open direction and repeat the test Specification: 1． Equipment frame: steel frame and test door. 2． Motor power fo
[Related Keywords : Hardware tester, Life testing machine, Electronic lock test, Universal testing machine]
Business Type
Manufacturer
Location
广东, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 3900 ~ 8000
Place of origin:
China
force output range 20 tons Safety valve calibration bench application: Test various relief valves such as full-open, micro-open, imperial, metric, flanged and threaded etc. Compare with similar products of other brands: over 23 years of experience in design and producing Safety Relief Valve Test bench, we has obvious advantages at techniques, test accuracy, safety etc. This equipment does not nee
[Related Keywords : safety valve test bench]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Place of origin:
China
Supply Ability:
60 sets per month
force value relative error Better than the shown ±1% Deformation precision ±0.5%FS Max. Tensile space 600mm Clamp type hydraulic grip Grip diameter of round specimen Φ20-60mm The thickness of flat specimen grip 0—30mm Maximum distance of compression space 800mm Upper and lower plate size (mm) 205×205mm Bending test pressed rolling width 150mm Max. Compression space 800mm Electromotor power
[Related Keywords : universal testing machine, tensile tester, compression tester, universal tensile testing machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Video
Min. Order:
1 Set
Price:
US$ 170000
Place of origin:
China
Supply Ability:
10 sets per month
mm×110 mm Stretching ratio 10:1（min. sample） Stretching speed 0-500mm/s (stepless variable) Stretching force 2000Nm Clamp pressure 2.5MPa Operating temperature Room temperature-350°C Operating temperature accuracy ±3℃ Stretching motor power 3.5kW Working voltage 3φ380VAC±10%，1φ220VAC±10%，50Hz Rated power Approx.83kW L x W x H 5000mm×2100mm×1900mm Weight Approx.5000kg
[Related Keywords : Film-stretching, Film Stretching Machine, Laboratory Stretching, Film-stretching Instrumen]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 30000
Place of origin:
China
Supply Ability:
10 sets per Month
Temperature humidity vibration test chamber This chamber is designed to do stress test on the testing product as a whole by means of forced mechanical loads, as well as to test samples for the effects of changes in temperature and humidity. Technical specifications: Model HD-PCT705 HD-PCT710 Internal volume 504 L 1000 L Internal dimensions (D*W*H) 700*800*900 mm 1000*1000*1000 mm External dimens
[Related Keywords : vibration test chamber]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Supply Ability:
store
ST-6608 Static Force Test Machine Standards: According to UL817: 2007, UL1310: 2001, UL697: 2004; Scope: Applies to check the power plug cables for security of conductor test, Security of blades or pin test, Security of insulation test, Strain relief tester, Jacket retention test and Blade pull test at elevated temperature etc. Technical parameters: Test workstation: 6 groups of specimens; Weight
[Related Keywords : Plug Static force test, UL817 static force test, Static force test machine, Strain relief tester]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
force, with high accuracy, smooth transmission, and low noise; The Z-axis adopts an imported specialized low friction cylinder precision pressure control system to ensure smooth movement, accurate positioning, and reliable operation of the Z-axis, improving the dynamic measurement accuracy of the measuring machine; The Z-axis balance cylinder adopts a rod type balance cylinder, which is safer and
[Related Keywords : measuring machine, UCC controller, AC-DMIS]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
force with unparalleled accuracy. Whether you're in engineering, manufacturing, or research, our Force Gauge meter is designed to meet all your force measurement needs. With its advanced technology and user-friendly interface, you can easily measure and analyze force in various applications. Trust in Lanetech's commitment to quality and innovation, and experience the power of force meter Gauge to
[Related Keywords : force gauge meter]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 3000 ~ 10000
Place of origin:
China
Supply Ability:
20sets/month
force of 1N is applied to the supply cord. The appliance under test is supplied at rated voltage, and rotated about its major axis at a rated of approximately 50 rev/min, the direction of rotation being reversed every 20 revolutions, the test is carried out for 1500 revolutions . The equipment will automatically shut down when the number of trials is reached. 2. Parameter Control system PLC+tou
[Related Keywords : flexing test apparatus, cord flexing tester, iec60335-2-23]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
China
forces attempting to separate the seal while it is still in a hot state. This characteristic holds significant importance, especially in processes like vertical form fill and seal (VFFS). Hot tack property is important since this situation occurs on vertical form-fill-seal packaging, during which no much cooling time is given. In the packing line, contents are dropped into the bag immediately aft
[Related Keywords : Hot Tack Tester, Tensile Tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
force. The purpose of performing a drop shock test for packaging products is to evaluate whether the packaging design is suitable, overpackaging or less-packaging, so as to improve the packaging design to save the cost protect products. FAQS OF DROP SHOCK TEST? What is the procedure of IEC 60068-2-32? This test is divided into two procedures. The first simulates falls that a specimen, normally in
[Related Keywords : Drop Test Machine]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
KRD70 Hydraulic Vibration Shaker KRD70 series hydraulic vibration shaker converts the energy of high-pressure liquid into the power of the reciprocating motion of the cylinder through the electro-hydraulic servo valve. Especially suitable for vibration tests requiring low frequency and high force. It can realize sine, random, multi-point excitation and shock test (sine, random, sine on random, r
[Related Keywords : Hydraulic shakers, vibration shakers, vibration table, Sine test]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 1 ~ 2
Place of origin:
China
Supply Ability:
100 sets per month
forces trapped air out, manifesting as observable bubbles from the leakage point. Technical Specification 1. PLC-Controlled Precision: Featuring industrial-grade stability, the Leak Tester is equipped with a user-friendly HMI touch screen interface for seamless operation. 2. Venturi Tube Technology: Employing a Venturi tube mechanism enables the generation of a stable vacuum of up to -90KPa, ensu
[Related Keywords : packaging leak tester, sealed pouch leakage, vacuum leakage tester, ASTM D3078]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 100
Place of origin:
China
to the Standard GB/T17394, GB/T1172,ASTM A956 & DIN 50156 For more details of leeb hardness tester principle , contact us. Mikrometry Instrument Limited is a professional testing instruments manufacturing company , we provide leeb tester, rebound hardness test, leeb hardness scale, digital push pull force gauge , cap torque meter, etc. We also offer optimized solutions for special requirements.
[Related Keywords : EHP110 Rebound Leeb Hardn]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
3 sets/month
Force can be tested 7,500 Pa Accuracy Deviation ≤3% Deformation Sensor 1 (or customized as per requirement) Controlling Method Siemens PLC + HM1 Drive Method Air Compressed Load Amplitude Test Range (Static) Pressure: +500~12,000 Pa (Continuous, adjustable) Suction: -500 ~ -7,200 Pa (Continuous, adjustable) Note: The test time and pressures can be adjusted during the test every time. Load Ampli
[Related Keywords : solar panel test machine, photovoltaic module test, pv modules tester, pv module test equipment]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
force is required to break the ampoule neck. Standards Several standards govern the testing of ampoule breaking strength, ensuring consistency and reliability in the testing process. ISO 9187, GB 2637, YBB00332002 Test Process An ampoule sample is place on the fixtures and the pressing head is driven down by the power system at the speed of 10 mm/m. The breaking strength is detected by the high
[Related Keywords : tensile tester, Ampoule Breaking Tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 4000
Place of origin:
China
Background Impact strength is a crucial parameter for assessing the quality of plastic films. It plays a significant role in determining a film's ability to withstand external forces and impacts, which can directly affect its cost and performance, especially during transportation and handling. The Falling Dart Impact Test is a traditional and widely accepted method for measuring the impact st
[Related Keywords : Impact Tester, plastic film impact, falling dart impact test]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Force range 2%~100%/ 0.2%~100% F·S Force accuracy (%) ≤±1/ ±0.5 Force resolution 1/500000FS Deformation accuracy (%) ≤ ±0.5 Displacement accuracy (%) ≤ ±0.5 Test speed (mm/min) 0.001-500 0.001- 1000 0.001-500 0.001-500 0.001-200 /500 Effective tension test space (mm) 600/800 800 700 700 550 Effective test width (mm) / 400 500 550 600 Power supply AC 220V/ 380V ±10%, 50Hz/ 60Hz (can be
[Related Keywords : XEX electronic testing]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Power supply: 220V 50Hz 200W; Test items: 1. Connector single hole plug test; 2. Full row plug and pull test of connector; 3. Connector plug life test; 4. Connector single pin and plastic retention test; 5. Connector NORMAL FORCE test; 6. General compression and tensile failure test; Instrument features: 1. The test conditions can be set and stored by the computer. Select Settings from the drop
[Related Keywords : Force Tester]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Competitive power force products from various power force manufacturers and power force suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
