Temperature System Wholesale

Battery Cell Forced Internal Short Circuit Tester IEC 62133

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

• Supply Ability:  

  100 sets per month

temperature rise) Cooling speed: average 1 °C / min (from 100 ° C to 0 ° C, nonlinear no-load, average cooling) Interior chamber dimension: W400×H500×D400mm Interior chamber material: 304 stainless steel plate, test box bottom reinforcement Cell forced internal short circuit test system Test load: 0~1000N adjustable (usually use 400N and 800N) Load accuracy ≤0.5%F.S Pressing speed range: 0

[Related Keywords : short circuit tester, battery testing machine, cell testing machine, battery testing equipment]

Universal Testing Machine

Specification Model : DEC-U5T Capacity : 50 kN Accuracy : F.S within ± 0.5 % Loading system : A.C Servo motor Temperature range : -176°C (within 5 min)

[Related Keywords : Universal testing machine]

Power Quality Analyzer(3P)

• Min. Order:  

  1 Set

• Price:  

  US$ 4000

• Place of origin:  

  Korea

• Supply Ability:  

  500 set/month

Simultaneously measures active/reactive/apparent power, power factor, RMS voltage/ current, phase angle and neutral line current • Supports a variety of wiring such as single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and three-phase 4-wire • Displays voltage and current in waveforms and phase diagram • EN50 160 Report Output • Environment Temperature and humidity measurement

[Related Keywords : Power Quality Analyzer]

Computer Controlled Electronic Universal Testing Machine

• Min. Order:  

  1

• Place of origin:  

  China

Temperature 3) GB/T16491-1996 Electronic Universal Material Testing Machine 4) JJF1103-2003 Evaluation of Computer Data Acquisition System for Universal Testing Machine 5) GB/T16825-1997 Verification for Tensile Testing Machine 6) GB/T7314-2005 Compression Test Method for Metallic Material at Room Temperatur 7) JJG139-1999 Verification Regulation for Tensile, Compression and Universal Testing Mac

[Related Keywords : electronic universal testing machine, universal testing machine, tensile testing machine, universal tensile teser]

ST Portable BDV Oil Test Kit,Oil Dielectric Strength Tester

• Min. Order:  

  1 Set

• Price:  

  US$ 2200

• Place of origin:  

  China

• Supply Ability:  

  100 sets

temperature and humidity. 5. The whole process easy to control. 6.With overvoltage, overcurrent, limiting protection, in order to ensure the safety operation. 7.With a temperature measurement display function and system clock display. 8.Standard RS232 interface. 9. PC application software is provided to upload test data to make WORD test report 10. Menu management, data input simple and convenien

[Related Keywords : bdv oil test, dielectric oil tester, oil dielectric strength, insulating oil tester]

UL 1685 Cable Vertical-Tray Flame Test Room

• Min. Order:  

  1 Set

• Price:  

  US$ 10000

• Place of origin:  

  China

requirements for the cable etc. function Main Components： 1. ignition control system; 2. Collection hood and exhaust duct. 3. Flow - measuring control system; 4. Smoke-measuring instruments. 5. Temperature-measuring control system; 6. Flame-measuring control system 7. Date -acquisition system a). Flow-measuring, b). Temperature-measuring, c). Velocity-measuring, d). Smoke-measuring.

[Related Keywords : FT4 Cable flame test, UL1685 Flame Test, Vertical tray flame test]

JB-500B Impact Testing Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 3000 ~ 6000

• Place of origin:  

  China

• Price Condition:  

  FOB Qingdao

• Supply Ability:  

  30 sets per month

Power: three-phase four-wire system 50Hz380V180W (Main Motor) 17. Working conditions: 1. Room temperature range is 10-35 ℃; 2. Relative humidity is less than 85％; 3. Non-corrosive media surrounding environment; 4. Installed in the thickness of more than 150mm of concrete foundations or fixed in the basis of more than 1400Kg; 5. The level degree of machine seat is installed to 0.2/1000.

[Related Keywords : Impact Testing Machine, Impact Tester, Impact Testing, Testing Machine]

Eddy Current Testing Equipment for Tube, Bar and Wire

• Place of origin:  

  China

temperature, thin-walled tubes, thin wires, and inner surface of the parts are not applicable. 6) Eddy current testing equipment for tube, bar and wire including BKNET-999/H Copper Tube Eddy Current Flaw Detector, GSET-551steel wire eddy current testing, BKNET-101 Automatic Eddy Current Flaw Detector, Rod Tube Rotary Eddy Current Flaw Detector ET-R-15/40/65/90, BKNET-01\02 Welded Pipe Eddy Curre

[Related Keywords : ndt testing equipment]

ASTM D942 Automatic Oxidation Stability of Lubricating Greases Tester Polystar Synthetic Mobil Polyr

• Place of origin:  

  China

oxygen bomb. Observe and record the pressure at specified time intervals. After a specified period of time, the degree of oxidation of the grease is determined by the corresponding decrease in the oxygen pressure. This instrument is suitable for testing the oxidation resistance of grease in static storage in an oxygen closed system under the condition of increasing the test temperature.

[Related Keywords : ASTM D942 tester, lube oxidation Stability]

Gold Supplier Programmable Constant Temperature and Humidity Testing Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 4890 ~ 5104

• Place of origin:  

  China

• Supply Ability:  

  100 set per Month

Temperature and humidity distribution uniformity: ±2ºC ±5 KP5. Temperature and humidity stability: ±0.2ºC ±2 KP6. Heating rate: RT ~ 150ºC average 3ºC ~ 5ºC/min7. Cooling rate: RT ~ -20ºC average 1ºC/min8. Temperature and humidity controller: balance temperature and humidity control system9. Refrigeration system: air-cooled, two-stage, fully sealed compressor, original imported French

[Related Keywords : Constant Temperature, Humidity Testing Machine, Testing Machine]

Single Workbench Type YFT-T2400 Hydraulic Butterfly Valve Test Equipment for Butterfly Valve Test

• Min. Order:  

  1 Set

• Price:  

  US$ 85000

• Place of origin:  

  China

• Supply Ability:  

  12 sets per month

system. When using it, the high pressure condition and the relief pressure condition can be changed by itself. So it can reduce oil temperature and prolong the life of test bench. 8. PLC control, touch screen display pressure diagram and printer system is optional. Main technical parameters and sizes range of test valve nominal diameter: 1400-2400(mm)range of test valve flange diameter: 1605-264

[Related Keywords : Valve Test Equipment, Butterfly Valve Test, Hydraulic Test Equipment]

Hybrid Karl Fischer Moisture Titrator MKH-700

• Place of origin:  

  Japan

• Price Condition:  

  FOB

Temperature 5 - 35°C Humidity 85%RH or below (no condensation) Power supply Measuring unit DC24V 5A (Main unit) AC100-240V ±10% 50-60Hz 2A (Comes with AC Adapter) Main control unit DC12V 3A (Main unit) AC100-240V ±10% 50-60Hz (Comes with AC Adapter) Power consumption Measuring unit Stirrer Approx. 80W Main control unit Approx. 20W Dimensions Measuring unit 141 (W) x 296 (D) x 38

[Related Keywords : Hybrid, Karl Fischer, Moisture Titrator, MKH-700]

VSM Vibrating Sample Magnetometer M-H Curve Hysteresis Graph Test System Magnetic Properties

• Place of origin:  

  China

• Supply Ability:  

  100 Set/ Sets per Month

temperature as time goes away will be recorded, then from there the saturated strength of the magnetization, the left strength of the magnetization, Coercive force, the Max of Magnetic energy product, the Curie temperature and the Magnetic conductivity(the Initial Magnetic conductivity is included ) of the sample can be deduced. VSM can measure magnetic materials such as powder, particles, films

[Related Keywords : VSM, Vibrating Sample Magnetom, M-H Curve, Hysteresis Graph]

Trimos TELS CH Horizontal Measuring Instrument

• Min. Order:  

  1 Unit

• Price:  

  US$ 11000 ~ 70000

• Place of origin:  

  Switzerland

Absolute measuring rangemm (in) 25 (1)Application range (external measurements)mm (in)100 (4) Application range (internal measurements)mm (in)100 (4)Max. permissible errors (according to measuring probe)µm1.5Repeatability (2s)µm0.1Resolutionsmm (in)0.1 ÷ 0.0001 (.001 ÷ 00001)Measuring force (adjustable)N3-8Operational temperature°C+10 ÷ +40Temperature of storage°C-10 ÷ +40Weight kg15

[Related Keywords : checking diameters, swiss made, calibration in workshop, precision]

Miniature Load Cell HY-A101

• Min. Order:  

  1 Set

• Price:  

  US$ 50

• Place of origin:  

  China

• Supply Ability:  

  2,000 Sets per Month

temperature could be customized for injection molding, extrusion and other manufacturing processes Suitable for Automotive press fit, automated assembly, 3C products testing, new energy product assembly, medical testing, robotics, mold assembly and other industrial testing and control system High dynamic response frequencymodel：HY-A101product origin:ChinaMaterial:Stainless steelDimension:φ8*6m

[Related Keywords : Load Cell]