Checking Instrument Wholesale

CST-50 Impact Specimen U/V Notch Projector

• Min. Order:  

  1 Set

• Price:  

  US$ 800

• Place of origin:  

  China

• Supply Ability:  

  100 Set/ Sets per Month

CST-50 Impact Specimen U/V Notch Projector Application and advantages: CST-50 impact specimen U/V notch projector is a supplemental equipment for impact test, which is mainly used to check the accuracy of the impact specimen U/V notch. Users can put the notched specimen on projector working table and compare the projection image with the standard plate to identify the quality of the specimen notc

[Related Keywords : Notch Projector, U/V Notch Projector]

Hot Sale Furniture Mechanics Comprehensive Test Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 137600 ~ 150800

• Place of origin:  

  China

• Supply Ability:  

  100 sets per Month

instrument shall adopt the electric ascending and descending device, left and right, front and rear free Moving, easy to sample. 23.Each cylinder can be set up to run the steps, the steps include open loop And closed-loop selection. Up to 150 run steps can be set up. 24.Record the curve of each cycle of each cylinder and check it when the test stops Look at the curve for any cycle. 25.The test cu

[Related Keywords : Test Machine, Furniture Mechanics Test, Furniture Test Machine]

ICONE2

• Place of origin:  

  United Kingdom

The Analysis of Fire The Cone Calorimeter is the most significant bench scale instrument in the field of fire testing. Heat release is the key measurement required to assess the fire development of materials and products. Traditionally it has been very difficult to measure and more recently full scall testing of items (e.g. furniture) has been possible by burning these articles and measuring the

[Related Keywords : Cone calorimeter]

Digital Salt Checks

Checks - Manual 1) The names of each part 2) Before Measurement Place 3 pieces of 1.5V (AAA) battery into the battery compartment in the bottom of the instrumnet. [N525 or A545 ot A555] sign displays on LCD for 2~3 sec., and then disappears. 3) Measurement Fill 'Sample Spoon' fully with sample solution. Press 'Hot' button for the solution over 70°C, 'Cold' button for the solution below 15&d

[Related Keywords : digital salt check]

Gap Projector Equipment / Charpy Impact Test Gap Projector (CST-50)

• Min. Order:  

  1 Set

• Price:  

  US$ 1500 ~ 4500

• Place of origin:  

  China

• Price Condition:  

  FOB Qingdao

• Supply Ability:  

  100 Sets per Month

Usage and Characteristics CST-50 Type Impact Specimen Gap Projector,based on the practical requirement of the domestic customers and according to the demand of impact specimen gap in GB/T229-2007 , It is the special equipment which checks the Charpy V – type and U -type gaps. The instrument magnifies impact specimen gap’s outline and projects it onto screen to compare with standard sample dra

[Related Keywords : Gap Projector, Gap Projector Equipment, impact tester, charpy Gap Projector]

CST-50 Lab Usage Gap Projector for Impact Specimen

• Min. Order:  

  1 Set

• Price:  

  US$ 1500 ~ 3000

• Place of origin:  

  China

• Price Condition:  

  FOB Qingdao

• Supply Ability:  

  30 Sets per Month

Usage and Characteristics CST-50 Type Impact Specimen Gap Projector,based on the practical requirement of the domestic customers and according to the demand of impact specimen gap in GB/T229-2007 , It is the special equipment which checks the Charpy V – type and U -type gaps. The instrument magnifies impact specimen gap’s outline and projects it onto screen to compare with standard sample dra

[Related Keywords : Gap Projector]

High Precision Spectroradiometer Integrating Sphere System

• Min. Order:  

  1 Set

• Price:  

  US$ 3600

• Place of origin:  

  China

LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177, CIE84, CIE-13.3, IES LM-79-19, Optical-Engineering-49-3-033602, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IESNA LM-63-2, IES-LM-80 and ANSI-C7

[Related Keywords : Integrating Sphere]

Transformer Variable Ratio of Entire Inspection Test

• Min. Order:  

  1 Set

• Price:  

  US$ 10

• Place of origin:  

  China

• Supply Ability:  

  88888888 sets per year

NAZJX transformer variable ratio of entire inspection device Variable ratio checking device, transformer testing device, variable ratio testing device, variable ratio checking device Overview of NAZJX "NAZJX transformer ratio of the entire inspection device" (referred to as "variable") is used to test 0.1 and below transformer ratio tester than the accuracy and resolution of a device, and can

[Related Keywords : Variable ratio checking device, transformer testing device, variable ratio testing device]

Ponovo PCT200 Series CT and PT Test Set for Current Transformer and PT Reference Testing Functi

• Min. Order:  

  1 Set

• Price:  

  US$ 1 ~ 20000

• Place of origin:  

  China

check Range 30,000:1 - 45,000:5 Accuracy 0.05% Knee point check max. 45,000V Burden measurement Range 0.001-1000 ohm Accuracy ±0.1%±1mΩ Gur Winding resistance test Range 0.001-1000 ohm Accuracy ±0.1%±1mΩ Gur Phase displacement check Accuracy 2 min Gur Resolution 0.01 min Other test functions Accuracy limiting factor Yes Instrument security factor Yes Remanence flux Yes Secondary time consta

[Related Keywords : CT/PT analyzer, CT test, PT test]

Automatic Potentiometric Titrator [AT-710M]

• Place of origin:  

  Japan

Check performance : Reminder of scheduled checkdate / Record of check results Management of electrode : Reminder of calibration date / Record of calibration history / Electrode check / History of electrode check Verification of burette capacity : Verification / Record of verification results Management of conduction time : Display of operating time Burette size 20mL glass burette with brown cover

[Related Keywords : Automatic Potentiometric Titrator, Potentiometric Titrator, Automatic Titrator]

Vibration Meter VM-6360 for Sale

• Place of origin:  

  China

• Supply Ability:  

  2000 pieces per month

Vibration Meter VM-6360 for Sale Applications: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. Features: * In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, mi

[Related Keywords : digital vibration meter, mini vibration analyzer supplier, portable vibration tester supplier]