Video
Min. Order:
1 Piece
Price:
US$ 15.2 ~ 18.8
Place of origin:
China
shell: AC2600V/1 minute(Water area) Indicating Angle 90/240-270° Temperature -13-33℃, 100% comply with accuracy class Technical Standards GB/T7676-1998 Environment GB8355-1987 Safety Standards GB4793-20 Working Temperature -40℃-65℃ Options: 1. Transmitting 4-20mA output, accuracy class: 1%; 2. With Alarm output; 3. With backlight function; 4. Shunt is necessary once DC current over 20A
[Related Keywords : analog panel meters, analog panel ammeter, analog ac ammeter price]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
1000units/Month
Working voltage :220VAC10%,50/60Hz ◇Working condition :environment temprature0~60℃,relative humidity ≤90% ◇Output load :load<750Ω(4-20mA)◇Working voltage :220VAC10%,50/60Hz,◇Dimension :96×105×168 mm performance ◇The new shell , waterproof , dust-proof , damp-proof ◇It can change to different measurement range , improve flexibility ◇Multiple beam RD measurement technique
[Related Keywords : Turbidity Meter, Turbidity analyzer, water turbidity test]
Business Type
Manufacturer
Location
Guangxizhuangzuzizhiqu, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 1002.9 ~ 1253.6
Place of origin:
China
Supply Ability:
60000 Pieces per Month
This is a device for non-contact measurement of natural gas (CH4) concentration based on laser absorption spectroscopy. When the instrument is working, it emits a specific wavelength range (the center wavelength is not the same for different gases under test)of the detection laser, which is diffusely reflected when it ments reflector (e.g. the ground, valves, pipelines, walls, etc.), and part of
[Related Keywords : Laser Methane Detector, Natural Gas, Pipe Line Monitoring]
Business Type
Supplier
Location
Henan, China
Employees Total
1 - 5
Annual Revenue
Less than USD 100,000
Place of origin:
China
Supply Ability:
2000 pcs/ month
work more than 20 hours continuously ● Large capacity data memory, can store 100 groups of original data and waveform. ● Real-time clock settings and display, convenient data recording and storage ● Low power consumption design. ● Reliable circuit and software design can avoid system halted. ● Measurement display, menu prompt information, incorrect information and switch machine inform
[Related Keywords : Surface Roughness Gauge]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 20000
Place of origin:
China
Supply Ability:
20 sets per Month
Working environment temperature +5…+35 ℃ Performance Temperature range* -70℃...+150℃ (high temperature: 180℃, optional); Pressure range Atmospheric pressure... 0.5 kPa Temperature fluctuation ≤±0.5℃ (under atmospheric pressure, no-load) Temperature uniformity ≤2℃ (under atmospheric pressure, no-load) Temperature deviation ≤±2℃ (under atmospheric pressure, no-load) Pressur
[Related Keywords : air pressure test chamber]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Shell material Cold rolled sheet steel, rust-proof and spray plastics on surface Internal materials SUS304 stainless steel Working chamber structure Funnel-shaped, adjustable vibration period; the dust flies freely, falls and gathers near the suction hole. Control system Controller Programmable controller, color LCD touch screen Operation mode Simple operation, convenient setting, blowing dust
[Related Keywords : sand dust test chamber]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 3000 ~ 10000
Place of origin:
China
shell of the equipment adopts high quality steel, sprayed with stoving varnish. 4. Sand and dust: Dry powder, portland cement paste and etc. 5. Control system: adopt Programmable Time Controller. 6. Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 7. Safety device: leakage protection, overheat protection Working dimension(mm) 500*500*500
[Related Keywords : sand test chamber, dustproof test chamber, IP5X test chamber, IP6X test chamber]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
China
Instrument Introduction This instrument is suitable for measuring the density of easy-flowing transparent liquids. It can also use a suitable constant temperature bath to measure viscous liquids above room temperature, and it can also be used for opaque liquids. Technical Parameter 1. Applicable standards: ISO3675, ASTM D2270, GB/T1884 2. Working unit: 2 tubes 3. Refrigeration method: built-in
[Related Keywords : ASTM D2270, ISO3675]
Business Type
Manufacturer
Location
Guangxizhuangzuzizhiqu, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
30set per month
shell test, sealing test (low pressure sealing test and high pressure sealing test) and upper seal test (ISO5208) for GB4981, in order to prevent faulty valves from entering work site. Features: simple operation, safe and reliable, sensitive test. 2. Features : 1) Applicable to gate valve,globe valve,ball valve,Check valve and etc direct-flange connection valves 2) Accessories special sealing dis
[Related Keywords : Valve Test Bench, Valve Pressure Test Bench]
Business Type
Supplier
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Set
Price:
US$ 10000 ~ 30000
Place of origin:
China
Supply Ability:
20 sets per month
Technical performance and feature 1. YFT-B vertical series hydraulic valve test bench is suitable for the shell and seal test of the valves below DN-300, it has two types of plane blind plates: plastic seal plates for non-flange valve test and O rings seal plates for flange valve test. 2. The work panel has claws and the upward side has impact cylinder. 3. the top beam can be turned over 90 degre
[Related Keywords : Valve Test Bench, Test Bench, Vertical Test Bench]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 4500 ~ 10000
Place of origin:
China
Supply Ability:
1000sets/year
shell of the equipment adopts high quality steel, sprayed with stoving varnish. 4. Sand and dust: Dry powder, portland cement paste and etc. 5. Control system: adopt Programmable Time Controller. 6. Transparent observation window made of toughened glass material, working chamber equipped with LED lighting 7. Safety device: leakage protection, overheat protection Working dimension(mm) 500*500*500
[Related Keywords : sand test chamber, dustproof test chamber, ip56x test chamber]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 8000
Place of origin:
China
Working Room Size (mm)RemarkWorking Power SupplySC-500800*800*800Single door structure220-240V/50Hz Single Phase (60Hz is optional)SC-0101000*1000*1000SC-0151000*1500*1000Double door structure380V/50Hz Three Phases (220-240V/50Hz Single Phase or 60Hz are optional)SC-0201000*2000*1000PS. Other size or Walk-in Dustproof Chamber can be design according to customer’s request. Specifications:• Te
[Related Keywords : Dust Proof Chamber]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 13000 ~ 18000
Place of origin:
China
Price Condition:
FOB QINGDAO
Supply Ability:
30 sets per month
work area, the rest are all in the shell protection, operation safety. Main Technical Parameters 1. The maximum punch load:60kN 2. The maximum clamping load:20kN(can manually adjust, the factory default value is 10 kN) 3. Load accuracy:±1% 4. Displacement accuracy:±1% 5. Test speed:2~100mm/min(At any rate constant speed control) 6. Punch stroke:60mm 7. Clamping stroke:40mm 8. Standard punching
[Related Keywords : Cupping testing machine, testing equipment]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Recommended Content
