Assembling Work Wholesale

VG35 Valve Work Sections VG35-LB399 348-9172-062

• Min. Order:  

  1 Piece

• Price:  

  US$ 56

• Place of origin:  

  China

Work sections • Outlet • Section seals • Stud kit to hold the assembly in place Work Section Types Sections can be the following types: • Single Acting (one work port) • Double Acting (two work ports) Actuators Work sections can be actuated by four means: • Manual Handles • Air Actuators • Electric Solenoids • Hydraulic Pilot Work Port Relief Valves Individual work section can h

[Related Keywords : Work Sections valve, Sections valve, VG35 Valve]

DIN Safety Valves Stainless Steel Spunding Valve with Pressure Gauge

• Place of origin:  

  China

The spunding valve is scaled in both psi and BAR, up to 32 psi (2.2 BAR). Comes fully assembled 1.5" tri-clamp connection In-line diaphragm pressure gauge Made from 304 stainless steel For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

[Related Keywords : spunding valve, brewery valve, vessel safety valve, DIN VALVE]

Herion Direct Solenoid Actuated Poppet Valves Series 24011 Item 2401103080002400

• Place of origin:  

  China

Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) Short switching times Suited for fine vacuum 1,33·10-3 mbar These solenoids are ATEX and FM, CSA, XP approved Working from 0 bar upwards Herion Direct solenoid actuated poppet valves series 95014 item 9501400080002400 Herion Direct solenoid actuated poppet valves series 95015 item 9501500080002400 Her

[Related Keywords : Valves, Herion, Series 24011, Direct Solenoid Actuated]

Single-seat Control Valve, Perforated Plug

• Place of origin:  

  China

Our China control valves design truly embodies versatility and performance, tailored to meet the demanding requirements of various industrial applications. The use of various materials for the body and internal parts ensures that the valve can withstand a wide range of working conditions, from low-pressure to high-temperature environments. One of the key features of our valve is its ability to re

[Related Keywords : Single Seat Control valve, Perforated Control valve, Multi-stage Control Valve]

Pneumatic V-Port Regulating Ball Valve

• Min. Order:  

  1 Set

• Price:  

  US$ 1 ~ 2

• Place of origin:  

  China

• Supply Ability:  

  30,000 Set/ Sets per Month

ASSEMBLY The ZPR740 Pneumatic V-Port Regulating Ball Valve,the valve’s core is a V-port on the half sphere. It has a sharp cutting edge, in the process of ball rotation, there is a wiping effect between the seat, and it has a strong cutting force on the medium. The V-ball and the flow channel of the seat form a fan-shaped area, which can change the cross-sectional area of the flow channel durin

[Related Keywords : v-port valve, ball valve, regulating valve, pneumatic valve]

Tungsten Carbide Valve Core Assembly

• Min. Order:  

  5 Case

• Price:  

  US$ 30

• Place of origin:  

  China

chemical industry, food, machinery, metallurgy, architecture and other industries for flushing, cooling and lubricating cleaning, etc. Application in the working conditions of high pressure, vibration, sand and slurry impacting during oil and natural gas prospecting. We are specilized on manufacturing Cemented tungsten carbide Tungsten Carbide Valves Assemblies fir oil and gas industry.

[Related Keywords : Tungsten carbide, Valve Core, Valve Core Assembly, oilfield]

Lapar Valve

• Place of origin:  

  China

• Supply Ability:  

  1500sets

work as an agent of LAPAR products. Later,assembly and testing parts of LAPAR product production line were introduced to LAPAR. Currently,Shanghai Lapar has obtained production authorization from LAPAR and successively introduced systematic LAPAR product production line and become an Asian headquarters of global network system of LAPAR,responsible for LAPAR’s affairs in the Asian-Pacific region

[Related Keywords : Lapar Valve, Pressure Regulators, Fisher Control Valve]

Aluminum Gas Valve

• Place of origin:  

  China

level gauges, pressure relief devices, liquid withdrawal tubes, various bonnet assemblies, and various outlet connections. Choose ABYDA Company for your LPG valve needs, and experience the difference that comes from working with a trusted and reliable LPG valve manufacturer. Contact us today to learn more about our products and services or to place an order for your next LPG valve project.

[Related Keywords : LP Gas Regulator, LPG valve, LPG fittings]

Self-Actuated Regulating Valves Self-Operated Control Valves for Pipeline Pressure Adjusting

• Place of origin:  

  China

• Supply Ability:  

  5000 sets/month

Assembled with Standard Diaphragm (or reinforced diaphragm) 2. Assembled with Piston 3. Assembled with Metal diaphragm (OCr18Ni9) The ZPL610 self-actuated pressure regulating valve offers flexibility selection based on working conditions such as pressure differential, temperature, and medium state, as well as leakage requirements. It features a fast-open flow characteristic, ensuring quick respo

[Related Keywords : salf actuated regulator, salf operated valves, pressure regulating valve, Self-regulating valve]

Wellhead Tubing Head Manufacturer

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

https://www.aqemachinery.com/product-list-tubing-head-.html The tubing head is the uppermost tee in the wellhead assembly. It provides a means of supporting and sealing the tubing column. The upper portion has a straight bowl and a 45℃ loaded shoulder to support and seal the tubing column by tubing hanging. It is designed to accept packing mechanisms that seal casing strings and hanger and pack

[Related Keywords : Wellhead Tubing Head]

Stainless Steel/PVDF/PVC Safety Valve

• Place of origin:  

  China

work normally to avoid accidents and losses. Design features: With Diaphragm structure spring and the pressure will be adjustable. The medium contacting parts are only the lower valve body and the diaphragm and they are assembled with sealing rib which has good sealing effect and high sensitivity EPDM lining PTFE with Cloth type diaphragm has a very good sealing effect and long service life The P

[Related Keywords : safety valve, Safety Relief Valves, relief valve for metering, pressure relief valve]

Flat Gate Valve

• Min. Order:  

  1 Set

• Price:  

  US$ 999999

• Place of origin:  

  China

• Supply Ability:  

  999999

work can be conducted without dismantling the valve. (1) the yoke sleeve - aluminum-bronze yoke sleeve needle thrust bearing, the greatest degree to reduce operating torque. (2) stem - length of thread until the carrier;Pin and spot welding;Has the stability. (3) pressure seal - uncomplicated design, configuration of segmented retaining ring and mild steel silver plated gasket to aid disassemb

[Related Keywords : Flat Gate Valve, wormgear, Z43F, Flange connection]

3-piece Screwed Ball Valve

ISO5211 Direct Mounting Type Standard Port, 2000PSI, BSPT Thread Ends SS316 Body, PTFE Seat SIZE : 1/4" to 2" Can assembling the actuator directly without any other device! Features Pipe thread in accordance with ANSI B2.1, BS21 1973, DIN 259 / 2999, ISO 228 Working Pressure : 2000PSI (140㎏/㎠) for Water, Oil, Gas Working Temperature : -40 to +160℃ in the absence of steam Direct mounting pad

[Related Keywords : Screwed Ball Valve, Valves stainless 316 304]

Temperature & Pressure Resistant Solenoid Valves

• Min. Order:  

  1 Set

• Price:  

  US$ 12

• Place of origin:  

  China

Temperature & Pressure Resistant Solenoid Valves is a small-diameter diaphragm solenoid valve independently researched and developed by Keyto. Its main function is to realize the opening and closing of the liquid circuit, and it is resistant to strong acid and alkali corrosion, high temperature, and high pressure. This series can withstand different reagents under different working conditions. It

[Related Keywords : high pressure solenoid va]

Floating Seal Fits Excavator

• Min. Order:  

  1 Set

• Price:  

  US$ 1 ~ 999

• Place of origin:  

  China

work, simple structure, etc., and is widely used in coal mine machinery. Such as the head (tail) sprocket assembly of the scraper conveyor, the loading mechanism and the cantilever section of the roadheader, the left and right cutting drums and reducers of the continuous shearer. Advantages of Floating Seal Fits Excavator 1. Improved Performance: Floating seal fits for excavator ensures a better

[Related Keywords : floating oil seal]

Mini Motorised Valve CWQ-15Q

assembling, easy to install Standard Features: 1) Rated Voltage: DC3-6V, 9-24V, AC9-24V 2) Rated Current: 45-100 mA 3) Output Torque: 1.5Nm 4) Valve size:DN8-25 (1/2 -1 Inch) 5) Rotation angle: 90 degrees 6) Material: 304 S/S,316S/S,Brass, UPVC 7) Opening/Closing: Max 3 seconds 8) IP65 Enclosure 9) Working pressure: Max 1.0Mpa 10) Medium temperature: 0-90 Centigrade Suitable Applications: 1) Very

[Related Keywords : motorised valve, electric valve, motorized valve]

High Pressure Hydraulic Ball Valve

• Min. Order:  

  100 Unit

• Price:  

  US$ 1

• Place of origin:  

  China

assemble the flanges to the end caps and place them in a rotary jig to weld them together. After cleaning the valve, start assembling the ball valve by inserting hollow steel balls into the body and securing the four corners of the valve. Finally, a handle and stop pin are fitted to the valve stem. So, turning the handle, the valve opens when the hole in the hollow steel ball is aligned with the

[Related Keywords : Hydraulic Ball Valve, 2-way, 3-way, Flange ball valves]

Bronze Ball Valve

• Min. Order:  

  1 Piece

• Price:  

  US$ 200

• Place of origin:  

  China

assembling and reassembling, you must be careful to prevent damage to the sealing surface of the ball valve copper parts, especially non-metal parts. Special tools should be used when removing the O-ring. The bolts on the flange must be tightened symmetrically, gradually and evenly during assembly. The cleaning agent should be compatible with the rubber parts, plastic parts, metal parts and worki

[Related Keywords : 15mm copper valve]

GKSL-Series Linear Piston Pneumatic Actuator

• Min. Order:  

  200 Set

• Price:  

  US$ 200

• Place of origin:  

  China

• Supply Ability:  

  15~20PCS/Y

assemble the single-acting actuator, and meet different torque output ranges by changing the number of springs. 8. Bearing, guide plate The use of low-friction, long-life composite materials avoids direct contact between metal and metal, and is simple and convenient to maintain and replace. 9. Seal Use nitrile rubber under normal temperature working conditions, and use fluorine rubber or silicone

[Related Keywords : actuator valve pneumatic]

Ball Valve

• Min. Order:  

  2

• Price:  

  USD 10

• Place of origin:  

  India

• Price Condition:  

  FOB AHMEDABAD

• Supply Ability:  

  READY STOCK

work to achieve perfect shutoff even after years of disuse. There are two type of ball valve based on the ball type, floating ball valve and trunnion mounted ball valve. Depends on the bore size, ball valve is separated into full port ball valve and reduced port ball valve. There are three types of body styles of Ball Valve: One-piece, Two piece split, Three piece split, top entry and welded, bal

[Related Keywords : CAST STEEL BALL VALVE, STAINLESS STEEL BALL VALVE, FORGE STEEL BALL VALVE, GUNMETAL BALL VALVE]