Impeller . Wholesale

Gas Compression and Gas Delivery Machinery PP Fan Draught Fan

• Place of origin:  

  China

. The main structural components of the fan are impeller, casing, air inlet, bracket, motor, pulley, coupling, silencer, transmission parts (bearing), etc. The unpowered ventilator uses the natural wind and the air heat convection caused by the temperature difference between indoor and outdoor to promote the rotation of the turbine, so as to use the centrifugal force and negative pressure effect

[Related Keywords : PP fan, Gas Compression Gas D, centrifugal fan, centrifugal blower]

High-Pressure Centrifugal Fan for Iron Furnaces

• Min. Order:  

  1 Set

• Price:  

  US$ 4500

• Place of origin:  

  China

• Supply Ability:  

  100 Set/ Per Month

. form The 8-09 fans are single suction, with 5 machine numbers: No.6.8A, 7.1D, 8D, 8.5D, and 9D. Fans 9-12 are single suction, with 5 machine numbers: No.6.8A, 7.1A, 7.7A, 8D, and 9D. The 8-09 and 9-12 fans can be made into clockwise rotation or counterclockwise rotation. Viewed from one end of the motor, if the impeller rotates in a clockwise direction, it is called a clockwise rotating fan, wh

[Related Keywords : Centrifugal Fan, Fan for Iron Furmaces, Industrial Fan, Tunnel Fan]

380m3/H High Air Flow Mini Industrial Air Blower 6Kpa 48VDC Brushless Centrifugal Fan

• Place of origin:  

  China

.it can be controlled by intelligent machine and equipment easily (4) Drived by brushless motor driver the blower will have over current, under/over voltage,stall protections. How To Use The Blower Correctly This blower can run at CCW direction only.Reverse the impeller running direction can not change the air direction. Filter onto the inlet to protect the blower from dust and water. Keep the en

[Related Keywords : Industrial Air Blower]

POPULA Single Board Rear Tilting Centrifugal Fan HCF-I A

• Min. Order:  

  1 Set

• Price:  

  US$ 400

• Place of origin:  

  China

• Supply Ability:  

  1000 Set/ Sets per DAY

POPULA Fan HCF Centrifugal Fan I A Single Board Rear Tilting Kitchen Oil Smoke Exhaust Hotel Oil Smoke Exhaust Product Introduction: Impeller : Backward single-platemoeller . Convenient for clean.Noise : 10% lower than similarfans . Suitable Air : Non-hypergolicnon-corrosive , dustinesss 120mg /m³ -20c < air temperature < 85℃.Application : Suitable for kitchen lampblack exhausting and using wi

[Related Keywords : centrifugal fan, exhaust fan, Snail type fan]

FRP Centrifugal Fan

• Min. Order:  

  1 Unit

• Price:  

  US$ 550

• Place of origin:  

  China

• Supply Ability:  

  300/Day

FRP glass fiber reinforced plastic anticorrosive centrifugal fan is mainly composed of impeller, casing, air inlet, casing support frame, belt, pulley, pulley cover, base and relative base, shock absorber and other parts of which are equipped with motors. FRP glass fiber reinforced plastic anticorrosive centrifugal fan has a maximum air volume of 150,000 CMH with high performance, high efficiency

[Related Keywords : FRP Centrifugal Fan, Centrifugal Fan, FRP blower]

XA12025B-AC Series 120x120x25mm

• Min. Order:  

  1 Piece

• Price:  

  US$ 12 ~ 16.5

• Place of origin:  

  China

• Supply Ability:  

  5000

XA12025B AC Series Dimension(mm):120x120x25Impeller: Thermoplastic PBT 94V-0Housing/Frame: Die Casting Aluminum & Surface Black PaintBearing System: Sleeve|BallOperation Temp: -10℃~60℃ (Humidity 35%-85%RH)Storage Temp: -20℃~70℃ (Humidity 35%-85%RH)Note: If you don’t find the right fan here, you may consult us online for help.1. Main parameters like bearing, voltage, speed, airflow, nois

[Related Keywords : axial fan, ac fan, brushless fan, cooling fan]

133mm AC Backward-curved Centrifugal Fan

• Place of origin:  

  China

has a compact structure, operates reliably and is both energy saving and efficient. 133mm AC Backward-curved Centrifugal Fans is designed with low noise, a long service life, and is easy to install. After years of independent research and development, we now have available high performance, and low noise level, one-piece injected plastic impellers, with a diameter range from φ133 to φ250 mm.

[Related Keywords : Centrifugal Fan]

DC Brushless Fan 12025 Cooling Fan

• Min. Order:  

  1000 Piece

• Price:  

  US$ 1.35

• Place of origin:  

  China

• Supply Ability:  

  100000pcs per week

Size:120x120x25mm Motor:DC brushless fan motor Bearing:Ball or sleeve Weight:140g No. of Pole:4 Poles Rotating Direction:Counter-Clockwise Optional Function: 1/Lock Protection 2/Reverse polarity protection 3/Waterproof Level Material: Housing: Thermoplastic PBT, UL94V-0 Impeller: Thermoplastic PBT, UL94V-0 Lead Wire: UL 1007 AWG#22 Available wire: ”+” Red, “-” Black Optional wire:” Sen

[Related Keywords : cooling fan, axial fan, 12025 cooling fan]

Highway Industry 120/133/175/140/160/180mm DC Forward Curved Centrifugal Fan for Condenser

• Min. Order:  

  20 Piece

• Price:  

  US$ 25 ~ 99

• Place of origin:  

  China

• Supply Ability:  

  5000pcs per month

.2240028429160.6HW-F120062D012129～142.5240028429160.6Model naming instructions 1."HW-" stands for the abbreviation of the company name (positions in grid 1-3)2. Fan type (F represents a forward tilt fan, B represents a backward tilt fan, A represents an axial flow fan, and C represents a cross flow fan) (positions in grid 4) 3. Outer diameter dimension of impeller (position in grid 5-7) 4. Impe

[Related Keywords : Forward centrifugal fan, DC centrifugal fan blower, Centrifugal Fan for Conde]

DHSP

▶ Application For Clean Water. Use of chemical Process. Enviromental Industries. Oter Various Industries. High Temperature of strong Acid. Water Treating Industries.Waste Scrubber ▶ Design And Operation Feature 1. With This Model a Foot Valve Is Not Need 2. Adjustable Side Plate And Impeller 3. Even In Case That Reversing Function ISO Out Of Order And The Water In the Discharge Pipe Goes Ba

[Related Keywords : SELF PRIMING PUMP, PUMP]

Centrifugal process pump

. Also, this series has good parts interchangeability for easy maintenance and parts stock. The DAP series good solution for chemical process industry. Designed for process industry 28 sizes Max. Capacity : 1300 m3/hr at 1750 rpm Max. Head : 223m at 3500 rpm Temperature to 371°C with high temperature application option. Fully open impeller investment casting Material : DCI, WCB, CF8, CD4M,

[Related Keywords : pump, centrifugal pump. dongyang, dycp]

Large Propeller Exhaust Fans [TFP-T120ES / ET]

• Place of origin:  

  Korea

• Price Condition:  

  FOB Any Korean Ports

Characteristics Fan blade is made of SUS material for preventing the corrosion from the ammonia gas of barns and poultry farms. Adhered the net to prevent the accident and to optimize assembly. Fixed the impeller by both a nut and the stripper bolt for the durability and the safety. The impeller is designed for high air volume. Attached the eye bolt on the back of frame for the easy and firm inst

[Related Keywords : propeller ans, ventilation fans, industrial exhaust fans, axial fans]

Low Noise Mixed Flow Axial Fan for Hydroponic Grow Industry Ventilation

• Min. Order:  

  1 Unit

• Price:  

  US$ 50

• Place of origin:  

  China

• Supply Ability:  

  1000 per day

. Our mix fans are including industry leading design features to ensure your ventilation equip-ment has the latest technologies available. VERY MIX FAN HAS BEEN TEST FOR THREE DIFFERENT PLANES BEFORE PACKAGE Main features with LAX Series All mold design construction. Housings are manufactured with Nylon and Steel Mix type of impeller with high efficiency The fan is compact, so it is easy to in

[Related Keywords : Axial Fan, Mixed Flow fan, exhaust fan, agriculture fan]

Sirocco Fan

Click on small images to see them in enlarged detail Introduction Impeller is small width, forward. It has(20~64) blades. Drive method : Motor direct drive / V-belt drive. Suction : 1 way and Two ways. Purpose Sirocco fan is used ventilating for genall buildings for a septic tank, chemistry Gases.

[Related Keywords : Sirocco Fan]

STRONBULL SFG Industrial Axial Fan Low Noise Wall-mounted Duct Fan

• Min. Order:  

  1 Set

• Price:  

  US$ 10

• Place of origin:  

  China

• Supply Ability:  

  100,000 Sets per Month

PRODUCTS INFO: Type:STRONBULL industrial axial fan SFG Brand:STRONBULL Electric Current:AC Power:0.18-5.5kw Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:600-49322M3/h Air Pressure:60 - 400 Pa Speed:960r/min ,1450r/min,2960r/min Max Noise:<72 Impeller diameter:200-1200mm Blade Material:Carbon steel Mounting:Ceiling or wall mount Driving Mode:Direct motor driving Color:

[Related Keywords : Industrial Fan, Centrifugal fan, Ventilation Fan, Air Cooler]