Place of origin:
Korea
* Connection Part a. Light Sleeve size : 5cm, 8cmcolor : luminous, clear b. Thimble (TS Course) protects monofilament line from metal contact damageis being used in hook and swivel eyes where chaffing gear needs to be extra-strongluminous plastic thimble absorbs light and brings a low level light source to the hook material : luminous plastic, stainless steel, aluminumsize : S(id 2.5mm), L(id 3.0
[Related Keywords : light sleeve, luminous bead, thimble]
Business Type
Manufacturer
Location
Busan, Korea
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
Korea
The system can prevent the excessive deformation of duct or pipe in case of earthquake by hanging duct or pipe using wire rope. The system consists of a plated wire rope, wire clip, thimble, shackle and bracket.
[Related Keywords : seismic control]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
CHAIN STOPPER AND CHOCKS A. OCIMF CHAIN STOPPER B. MOORING PIPE C. PANAMA CHOCK D. OCIMF SINGLE PT MOORING PIPE OCIMF E. CLOSED CHOCK CHONGQING SAI KE XIN INDUSTRIAL & TRADING CO.,LTD We loated at Chongqing ,China. we export Deck-fitting products below:Including(Anchor,Chain&fitting,Fairlead,,J-chaser,Grapnel,4 prong grapnel,Chain stopper ,,Thimbles,ChockSpring towing hook...
[Related Keywords : CHAIN STOPPER, CHOCK, OCIMF]
Business Type
Manufacturer
Location
Chongqing, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
a kind of polyimide resin, which has good high temperature resistance and excellent machining performance. Advantages: high toughness, high heat resistance, high insulation, high mechanical strength, extremely low water absorption and high dimensional stability. Uses: heat insulation pad, insulating parts, valve seat, thrust bearing, separation claw, thimble, chip test seat, etc. Note: this produ
[Related Keywords : polyimide sheet pi sheet, polyimide rod pi rod, Vespel SP1 Vespel SCP-500, similar Meldin polyimide]
Business Type
Manufacturer
Location
æ±è, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Video
Place of origin:
Korea
a thimble. Specification NAME 48-183 HAPPYBEARS Kuick needle QUANTITY 1 set( 1 Kuick needle + 3 extra needle) SIZE Kuick needle(including needle) width 1.9 x length 4.8cm Needle inner diameter 0.4mm / outer diameter 0.9mm MATERIAL Body : plastic, Needle : stainless steel Package User guide card (Simple product manual card is included) P.SIZE (W12.5 x H9.3 x D2.5cm) How to change a needle ① Fir
[Related Keywords : fucntional needle, sewing needle, Handle Sewing, Embroidery needle]
Business Type
Manufacturer
Location
Gwangju, Korea
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Place of origin:
China
a variety of materials and finishes, including galvanized steel, alloy steel (surface finishes such as galvanized, hot-dip galvanized, and powder coated are common), and stainless steel. Stainless steel is the most superior in terms of corrosion resistance and resistance to harsh weather. There are various types of products, including turnbuckles, wire rope clips, thimbles, wire rope ferrules, bl
[Related Keywords : industrial rigging suppli]
Business Type
Supplier
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
a long life. Process CNC Tolerance grade +—0.05mm Surface treatment Heat treatment Quality control 1.Mould oil road, smooth water transport. 2.The core is not repaired and welded. 3.Inserts, sliders, and thimbles are assembled. Importing country Japan Our Custom Die Casting Mould includes Aluminum Alloy Die Cast Part , Magnesium Alloy, Zinc Alloy, etc. It provides all-round production services
[Related Keywords : Die Casting Mould, Die Cast Part, CNC Machined Part, Gravity Casting]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
10 Piece
Price:
US$ 1
Place of origin:
China
Supply Ability:
10000 pcs/month
Thimble Corner Pin Test Pin 6PIN, Stainless Steel Spring, Cam Automatic Car Once Formed, Surface Treatment: Can Be Gold Plated. With Anti-Corrosion, Small Size, High Current, Can Be Customized. The Plastic Material Is HTN Plastic Material, Pin Number 1-64pin, 2-128pin Material: C3604 Size: Customizable Stretch: 72g±20g (Customizable) Current: 1-30A Customizable) We are professional non-standar
[Related Keywords : double bend pogopins, customized pogopin, bend pogopin connector]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
thimble 4-way roller fairlead Mounting plate Rated line pull 3500lb (1590kg)single line Motor 1.5hp/1.1kw, permanent magnet 12V Control Remote switch Gear reduction ratio 153:1 Drum size Ø1.24"*2.88" (Ø31.5*73mm) Cable Ø5.5mm*12m Overall dimension (L*W*H) 12.1”(L)×4.1″(W) ×4.4”(H) Mounting bolt pattern 3.13″(79.3mm) Weight 7kg We have a whole set of quality management system to guara
[Related Keywords : Auto Winch, Electric winch]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
50 Carton
Price:
US$ 0.1
Place of origin:
China
a wider space for wire rope slings constructed with thimble eyes or for large crane hooks. Types of Master Links And Sub Assemblies Grade 8 Forged Master Link TCSH033 Grade 8 Forged Master Link Assembly TCSH032 Grade 8 Forged Master Link A-342 Grade 8 Forged Master Link Assembly A-345 Grade 10 Master Conrol Link With Flat Grade 10 Master Link Assembly with Flat Grade 8 US Type Master Link Assemb
[Related Keywords : lift sling straps]
Business Type
Manufacturer
Location
Chongqing, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 3.5
Place of origin:
China
Supply Ability:
80000 sets / month
a real factory ! What we can produce ? 1. rigging hardware like snap hook, shackles, turnbuckles, rope clips , thimble, bolt and nut, ect 2. marine hardware like cleat, anchor, hinge, plate, marine latch, deck filler,bollard , stanchion, ect. 3. Zhibo also can cast parts per customer's samples or drawingsWhat is our main material ? Stainless steel 304/316 Since the establishment of our company,
[Related Keywords : shade sail hardware, rigging hardware, shade sail fixing hardwar]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
100pcs
Price:
USD 15
Place of origin:
China
Price Condition:
FOB shanghai
Supply Ability:
10000pcs/month
Sliding choker wire rope slings are manufactured with a hook that slides between the two eyes. This allows the operator to place one eye on the hook, which creates an adjustable hitch around a load. Our wire rope sling with sliding choker features a thimbled eye on the sling end that attaches to the hook; this helps prevent abrasions and general wear on the sling eye, which lengthens the working
[Related Keywords : Wire rope, wire rope sling, stainless steel wire rope, galvanized wire rope sling]
Business Type
Supplier
Location
Chongqing, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Price Condition:
FOB
.Offshore Mooring Chains .Anchors .Anchor Chains .Shackles .Ropes & Thimbles .Quick Release Hooks .Steel Wire Ropes With the highly qualified and professional teams,our company has committed to the international markets for many years.We offer our customers a wide range of high quality products at competitive prices. We always focus on the need of the customers and attain their trust with
[Related Keywords : anchor chain, mooring chain]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 100
Place of origin:
China
Dear Sir, We are a leading professional supplier of marine equipments in China.We can provide the wire rope of all size at the lowest prices as following: Wire rope with FC, IWRC, IWR, Wire rope with thimble or eyes at ends ;Synthetic mooring rope,3-strand, 8-strand, multi-strand P.P & P.EPolyamide multi-fiber rope, 3-strand, 8-strand, multi-strand or doubled braided If you are interested,please
[Related Keywords : wire rope, polyproplene rope]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
thimble or resin thread . which depends on different cutomer's requirements . the insulator is with ball groove top , generally when connect with cables , it is more easier for handle . normally the insulator will be with a plastic C type ring , you can just put the cable inside the C ring and insert into porcelain top groove . then finish . this kind of design are more suitable for cables w
[Related Keywords : Shackle Type Insulator, High Tension Insulators]
Business Type
Supplier
Location
Liaoning, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Milliwatt
Price:
US$ 188000
Place of origin:
China
thimble stable thimble Electrical component list List of main disc components (main panel length 1250mm, width 500mm) No Name Model Quantity (unit) Manufacturer 1 residual current operated circuit breaker DZ15LE-1004901 1 Chint 2 Current Transformer BH-0.66 3 Chint 3 low voltage fuse base(insurance) 6A fuse link RT18-32 R015 5 5 Chint 4 Control Transformer BK-50VA(380-220V) 1 Chint 5 phase-phas
[Related Keywords : Automatic PIN Support System, woodworking machine]
Business Type
Manufacturer
Location
(Liaoning), Netherlands
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
10000meters
Price:
USD 0.1
Place of origin:
China
Price Condition:
FOB shanghai
1. Fiber: UHMWPE fiber 2. Resin: L-Series resin 3.Specification:2mm-200mm 4..as strong as a wire rope, with the same diameter but only about 10% of the weight per meter 5.Exceptional strength/Excellent fatigue resistance/Durability 6. Chemical Resistance 7. Soft and Better Bending 8. we can also provide rope with stainless steel thimble with locking eye splice at both terminal ends or with
[Related Keywords : winch rope, UHMWPE ROP, towing rope, UHMWPE towing rope]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Set
Price:
US$ 200
Place of origin:
China
Supply Ability:
200,000 molding set/set per day
A100B130C100 mold base S45C Non-standard 2 A101-5 former mold S136 3 A102-5 Front die pad S136 4 A207 Front die insert S136 6400-2315 5 B101-8 back mold S136 6 B174 Rear mold insert S136 6400-2315 7 503 Thimble SKD61 8 900 Locating ring S45C Order with mold base 9 901 spit SKD61 Standard parts order 10 902 Side lock (top) SKD61 Homemade 11 903 Side lock (below) SKD61 Homemade 12 904 front module
[Related Keywords : Plastic Injection Mold, PA66 molding]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
500 Piece
Price:
US$ 0.25
Place of origin:
China
Supply Ability:
10000
Guy thimble, also known as the cable thimble or stay wire thimble, is utilized for working as an interface on pole band to connect to the guy grip. The guy thimble is extensively utilized for the electric power line or a dead end line. In addition to that, the cable thimble generally connects with the already formed tension clamp for supporting and protecting the ADSS cable. The cable thimble is
[Related Keywords : Galvenized, Wire Rope Fittings, ISO9001 2015, Wire Rope Round Thimble]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
11 - 50
Annual Revenue
More than 100,000,000
Competitive a thimble products from various a thimble manufacturers and a thimble suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
