Min. Order:
50 Unit
Price:
US$ 1
Place of origin:
China
We can offer all steel and tungsten carbide self-drilling cross bit. The all steel self-drilling cross bits (EX) used for loose to medium dense ground formations. The tungsten carbide self-drilling cross bits (EXX) used for medium to strong fractured rock formations.
[Related Keywords : Anchor, Threaded Hollow Bar, Mining, Fasteners]
Business Type
Supplier
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
available R32,T38,T45,T51,T68 threaded Cross bits and button bits. cross bits Diameter:(mm)43mm-76mm button bits 43mm-127mm Flat face,drop center face design etc. also with normal and retrac bodies
[Related Keywords : button bits]
Business Type
Manufacturer
Location
SHANDONG, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,000
bits:20mm-45mm;cross bits:32mm-50mm;button bits:32mm-50mm tapered drill rod:H22x108mm,H19x108mm shank.Length 400mm-4800mm. ){this.width=;"> Bit Diameter Buttons,mm Taper Water Hole Part No Rock formation mm Guage Front Angle 36 3X8 1X8 25° 7° 2 Q436-722 For soft and middle hard formations 38 3X8 1X8 25° 7° 2 Q438-722 40 3X9 1X8 25° 7° 2 Q440-722 42 3X9 1X9 25°
[Related Keywords : rock bits, rock tools, button bits, drilling tools]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
Price Condition:
FOB
cross bits diameter: 32mm-65mm; taper degree: 6, 7, 11, 12; water hole: 3, 5; theread: R, T, H; Our company main products are rock Drilling tools and mining tools, include five series, more than 500 types. They are Tapered Drilling Tools, Threaded Extension Drilling tools, mining tools,Down The Hole Tools, and coal mining tools. Our products are well sold all over the china market, also export to
[Related Keywords : tapered bit, button bit, bit, cross bit]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
50PCS
Place of origin:
China
Price Condition:
FOB HUANGPU
Supply Ability:
50000pcs/ month
Carbides shapes are cross type on drill bits. Same as taper chisel bits, they have different taper degree and diameters. Meanwhile cross bits are Usually all carbide tips, including chisel, cross or button types, before carbides run out, carbides can be grind to be sharper when carbides are wear out. (1) Type: cross bits (2) Size: 19mm, 22mm, 25mm (3) Diameter: 26-100mm. (4) Taper: degree 4°46
[Related Keywords : Taper Cross Bits, MAXDRILL Taper Cross Bits, Rock Drilling Tools, Drilling Cross bits]
Business Type
Manufacturer
Location
Guizhou, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Video
Min. Order:
1 Set
Price:
US$ 2000
Place of origin:
China
Supply Ability:
20 sets/ month
Application：Generally used to cut low fractures hard rock formation and partially fragmented medium hard rock formation up to 100 Mpa, suitable for cutting through fissured rock. Features： Shell height: as customers request, for example increased to 1500/2000mm, to increase the drilling volume and the work efficiency. Teeth: B47K22 or B40K12 or upon request. Wear protection: Hard facing-Wear
[Related Keywords : Core barrel with rollers, Core barrel rock bits, Core barrel cross cutter, Core barrel]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Bit Laser Supports CO2, YAG, FIBER, SPI, QCW, CW,etc., and can adjust current, pulse frequency, duty cycle, and other parameters based on different laser parameters through software . Can display the laser status in real-time, and JCZ laser digital communication protocol 1.0 supports almost all lasers available in the market. Red Light Display Supports red light as an indicator Password Control
[Related Keywords : LASER SOFTWARE]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Min. Order:
1 Box
Price:
US$ 1
Place of origin:
Germany
Supply Ability:
5000
cross inductivity Lq (phase) 19 mH Electric time constant 2.1 ms Thermal time constant 41 min Thermal resistance 1.5 K/W Measuring flange 250 x 250 x 15 mm, steel Total mass moment of inertia of output 0.257 kgcm2 Product weight 1500 g Permissible axial shaft load 70 N Permissible radial shaft load 350 N Rotor position sensor Absolute multi-turn encoder rotor position sensor, manufacturer designa
[Related Keywords : EMGA-60-P-G3-EAS-60, EMGA-60-P-G5-EAS-60, EMMT-AS-60-S-LS-RMB]
Business Type
Supplier
Location
Hubei, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Piece
Price:
US$ 5000
Place of origin:
United States
bit IEEE-854 floating point format. The data is then placed in dual port memory that is accessible by the on-board C32 DSP on one side and the VME bus on the other. In addition to the I/O cards, the Control Module contains an “internal” communication card, a main processor card, and sometimes a flash disk card. Each card takes one slot except for the main processor that takes two slots. Cards
[Related Keywords : 151X1235BC01SA01]
Business Type
Supplier
Location
福建, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Unit
Price:
US$ 1
Place of origin:
Germany
cross inductivity Lq (phase) 19 mH Electric time constant 2.1 ms Thermal time constant 41 min Thermal resistance 1.5 K/W Measuring flange 250 x 250 x 15 mm, steel Total mass moment of inertia of output 0.257 kgcm2 Product weight 1500 g Permissible axial shaft load 70 N Permissible radial shaft load 350 N Rotor position sensor Absolute multi-turn encoder rotor position sensor, manufacturer designa
[Related Keywords : EMMT-AS-60-S-LS-RMB, FestoEMMT-AS-60-S-LS-RMB, Festo Servo Motor, Festo 5242199]
Business Type
Supplier
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
15 Bag
Price:
US$ 85
Place of origin:
China
cross-section according to IEC 60204 (page 28) and use the required cable materials (page 53) to achieve maximum values. Cable length. Each SM128V occupies a single slot in the VME rack. 1. Carefully open the packaging of the card. Use a grounding wire or release any static electricity before touching the card and remove it from oneself. 2. Place the card welding face down on
[Related Keywords : SYN5201A, 3BHB006714R0217, SYN5201A-Z V217 3BHB00671]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
Supply Ability:
12 per year
bit camera link Analog video output PAL/NTSC Onboard image processing Auto/Manual Exposure; Auto/Manual Gain; Non-uniformity Correction; Pixels correction Image function Frame rate selection, synchronization method selection, contrast/brightness adjustment (manual), enhancement, test image, information saved, cross indication. Electrical interface HR10 D igital interface Mini Camera Link
[Related Keywords : SWIR Camera, Short wavelength infrared, low light imaging, Industrial camera]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
China
Supply Ability:
30 thousand tons
Bit Size 35-38mm Tube Ultimate Tensile Strength Min. 470 Mpa (115KN) Typical 530 Mpa (130KN) Typical Breaking Capacity 124KN Mass per Meter 1.92 Kgs Minimum Breaking Capacity 89KN Cross Section Area 245 mm² Recommended Initial Anchorage 3 - 6 Tons (27 - 53 KN) Hole Diameter Range 35-38mm Ultimate Axial Strain Typical 21% (Thickness<16mm) TRM Bolt Code Bolt Description Diameter (mm) Length (mm)
[Related Keywords : Friction Bolt]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Unit
Price:
US$ 100000
Place of origin:
Hungary
Supply Ability:
100 uinits in stock
Europe Origin World Famous Ginaf Brand Heavy Duty Mining Dump Truck GINAF 5380T DUMP TRUCK For more details,you can chat with me by Wechat: David-65205820 Whatsapp: 13647296799 for more details. Main technical parameters of GINAF dump truck item Head one Bit HD5380T Size parameters Vehicle: length × width × height (unloaded) mm 10235 × 2770 × 3950 Cargo box interior: length × width × height
[Related Keywords : mining dump truck, heavy duty dump truck, Ginaf mining dump truck, used mining machinery]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
Above 1000
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
Supply Ability:
5000 Set/ Sets per Month
bits are available in all standard drilling sizes. Also, non-standard sized bits can be produced according to requirements from clientsMatrix height: 6mm-8mm (most cost-effective), 8mm-10mm (long service life), 12mm-16mm (super service life)Bit Crown Profiles: “W” profile, “Flat” profile, “Semi-round” profile, “Cross” profile, “Gear profile”Waterways: Various waterways are ava
[Related Keywords : Diamond Bit, Geological drill bit]
Business Type
Manufacturer
Location
æ²³å, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
3-3/4" (95mm) Down Hole Motor For Horizontal Directional Drilling (HDD) Compare to the traditional trenching method Horizontal Directional Drilling (HDD) becomes more and more popular especially in urban construction, river and road crossing because it is more environment friendly and lower operation cost. Earth drilling tools in previous HDD projects can not meet the requirements of pipe line co
[Related Keywords : Down Hole Motor]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
cross-section,and the thread surface also has a high hardness.Therefore,when connecting,the screw can also tap the internal thread in the thread bottom hole of the connected part to form a connection.This screw is characterized by low screwing torque and high locking performance.It has better working performance than ordinary self tapping screws and can be used instead of machine screws. The self
[Related Keywords : Tapping Screw]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Bit No.T10T15/T10*T20T25T25 Our Product CatalogueScrewSelf Drilling ScrewsHex Self Tapping ScrewsHexagon Socket Set ScrewsHexagon Head Wood ScrewsHex Socket Flat Countersunk HeadHexagon Socket Button Head ScrewCross Recessed Pan Head Self Tapping ScrewBoltHexagon Head BoltLifting Eye BoltWing BoltCarriage BoltSwing BoltStud boltT Shaped BoltU Shaped BoltThreaded Pipe NippleWasherFlat WasherSpring
[Related Keywords : Screw]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
United States
bit/96kHz sampling and effect capabilities. Features 4 Channels 4 Digital Inputs 5 Line Inputs 3 Turntable Inputs 4 Switchable Digital/Line Inputs 4 Fader Start Inputs 3 Band EQ per channel(-26dB to +6dB) EQ Off/On/Talkober switch 2 Mic Inputs 2 Band Mic EQ 3 Position Adjustable Channel Fader Curve 3 Position Adjustable Cross Fader Curve Headphone Monitor auditioning Stereo Send /
[Related Keywords : DJ Equipment]
Business Type
Supplier
Location
Emilia, Italy
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
5
Place of origin:
China
bit data bus, single-channel Operating frequency: 200MHz FLASH memory The SLC the NAND Flash: 256MB (standard) / 1GB Interface resources 2 x 60 Pin 2.0mm space the DIP connector 1 x 30 Pin 2.0mm space the DIP connector 1 x 51 Pin 1.0mm space of SMD the connector On-board resources 4 x the User Leds (Green) 1 x Power Led (Red) Supply Voltage from 2V to 6V (support wake up from sleep mode) PCB Size
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Competitive bits cross products from various bits cross manufacturers and bits cross suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
