Ceramic Fiber Module Wholesale

VT6100 Confocal Microscope

• Min. Order:  

  1 Unit

• Price:  

  US$ 9999~19999

• Place of origin:  

  China

ceramics Paper fiber Ultra-precision metal tip PCB Gold plated micro-holes Grid line of solar plate Model No. VT6100 Travel Range X 100mm Y 100mm Z 100mm Size 520×380×600mm Weight 50kg Principle Spinning disk confocal optical system Objective Lens 50×(Optional: 10×, 20×, 100×) Field of View 120×120 μm~1.2×1.2 mm Step Height Measurement Repeatability(1σ) 12nm Accuracy*1 ± (0.2+L/100) μ

[Related Keywords : Confocal Microscope, micro-nano level measurem, surface roughness]

Refractory Anchors Manufacturer

• Place of origin:  

  China

walls from being damaged by Act as a thermal barrier between the hot medium and the vessel wall To optimize refractory lining performance, anchoring systems are used to fix refractory castables, boards, pressed plastics, fiber insulation and ceramic fiber modules to the furnace or kiln shell. They are made of heat-resistant stainless steel and nickel alloys and serve a variety of purposes.

[Related Keywords : refractory anchors]

MICRODYNADIR Membranes

• Place of origin:  

  Germany

Fiber Membrane Modules for Water Filtration (Ultrafiltration) The conventional treatment of water is based on a multi-step process including pre-filtration, precipitation/flocculation/coagulation, sedimentation, sand filtration and finally disinfection. Despite this complex process technology a constant effluent quality at raw water deviations is not always possible. Therefore, the dosage of add

[Related Keywords : MICRODYNADIR Membranes]

Ceramic Furnace

• Min. Order:  

  1 Set

• Price:  

  US$ 150000

• Place of origin:  

  China

ceramic pieces 10: heating method: natural gas or liquefied gas 11: control mode: automatic control computer operation 12: firing atmosphere: oxidizing atmosphere, reducing atmosphere; 13: heating speed: 200℃/h, 14: door: Electric. 15: smoke exhaust mode: on the exhaust 16: furnace wall structure: high pure fiber cotton 17: the same: flat roof structure and kiln wall structure. 18: doo

[Related Keywords : Ceramic furnace, Natural gas furnace, Box type furnace]

20w Handheld Fiber Laser Marking Machine

• Min. Order:  

  1unit

• Price:  

  USD 1

• Place of origin:  

  China

• Price Condition:  

  FOB USA

• Supply Ability:  

  10units

Handheld fiber laser marking machine with excellent quality and reasonable price, 20w output power, faster marking speed, more sophisticated engraving effect, integrated module design, maintenance-free. ATO fiber laser marking system features: Marks widest variety of materials, including steel, titanium, aluminum, copper, ceramics and some plastics. 100,000+ hours of laser life, reducing costs a

[Related Keywords : laser machine, laser marker, laser marking, fiber laser]

Type U Molybdenum Disilicide Heating Elements

• Min. Order:  

  1 Piece

• Price:  

  US$ 91~125

• Place of origin:  

  China

module consists of a high temperature ceramic fiber cylinder and a molybdenum disilicide heating element. The molybdenum disilicide is the same material we use for the U shaped heating element. The heating element is in contact with the fiber therefore the temperature of the element is limited to 1600ºC. The highest practical muffle furnace temperature is 1550ºC. The heating module makes a neat

[Related Keywords : MoSi2, Type U Bent, Silicon Molybdenum Rod, furnace]

Fiber Vs. CO2 Vs. Diode Laser: the Ultimate Guide 2

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

ceramics, bone, aluminum, and steel. Engraving Cutting Solid wood Solid Wood Plywood Plywood Glass/Ceramics Cardboard Steel Paper Leather Leather Paper Acrylic Acrylic Foam Brick Plastics Rubber Glass Fabric Fabric Bone Rubber Aluminum c. Fiber Laser Engravers Fiber laser machines can cut and engrave most metals and some non-metals. It cuts and marks metals that other laser machines cannot do. Th

[Related Keywords : Diode Laser]

Solar Cell Fiber Laser Scribing Machine Cell Cutting Machine Manual Working

• Min. Order:  

  1 Set

• Price:  

  US$ 9000

• Place of origin:  

  China

• Supply Ability:  

  10sets per month

Introduction: The 30w fiber laser with optics isolation system has high stability and good scribing quality, better than traditional lamp-pumped and diode laser. Its 1,064 nm laser wavelength could scribe on silicon wafer/ solar cell/ ceramic wafer/ thin metal sheet. Application and Market : Scribing and cutting for mono-crystalline silicon, poly-crystalline silicon, amorphous-crystalline sili

[Related Keywords : Cell cutting machine, Laser Scribing Machine]

Single Mode/Multimode Pigtails

• Place of origin:  

  China

• Supply Ability:  

  66000KM/month

ceramic ferrule provides good physical bearing and insertion force. 5. Extremely low insertion loss, extremely high return loss, performance higher than international standards. 6. Pigtail length can be customized. 7. Single core, double core can be customized on demand. 8. Controlled fiber protrusion for stable optical properties. Order information: Product module ID Product description Package

[Related Keywords : Single Mode]

TOBEE1.5x1B AH Hydraulic Slurry Pump for Tanker

• Min. Order:  

  1 Piece

• Price:  

  US$ 400 ~ 1000

• Place of origin:  

  China

• Supply Ability:  

  30

name slurry pump model AH Shaft seal Module Design Expeller drive seal, Packing seal, Mechanical seal Material Liner and Impeller Metal, Rubber, Ceramic, Polyurethane Farme Type A, B, C, D, E, R, F, G, S, T Drive Type CR, CV, ZV, DV Tobee® AH Slurry Pumps Presentation: Tobee® AH slurry pump are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general indu

[Related Keywords : slurry pump, 1.5x1B AH slurry pump, ah slurry pump, cad drawing slurry pump]

Facerom Laboratory Tube Furnace 1100C

• Min. Order:  

  1 Set

• Price:  

  US$ 2000 ~ 10000

• Place of origin:  

  China

leakage automatic power off; 9. K-type thermocouple, accurate temperature control 10. Heating element is ceramic fiber heating module, heating wire embedded structure structure Additional Options Vacuum system: (rotary vane mechanical pump, diffusion pump unit, molecular pump unit);Atmosphere system: (float flow meter, mass flow meter); Note: options need to be configured to expand the cabinet

[Related Keywords : tube furnace, laboratory furnace, quartz tube furnace]

Mobile Laser Cladding Equipment

• Place of origin:  

  China

Fiber laser Laser power 1500-6000W Power instability ≤±3% Lase wavelength 1080±10nm Working mode Continuous / Modulate Motion operating mechanism Six-axis industrial robot Motion repetition accuracy ±0.05mm Powder feeding amount 1-200g/min Applications1. Repairing and refurbishing components: Mobile laser cladding equipment can be used to repair and refurbish worn-out or damaged parts of mac

[Related Keywords : Mobile Laser Cladding]

Cerak Wool

Cerakwool is ceramic fiber that Keumkang Chemical Co., Ltd has developed internally with part of the required technology from G-K Associates, Inc., U.S.A CERAKWOOL is fiberized by blowing high purity alumina-silica powder melted at high temperature. Cerakwool, having high heat-resistance, high thermal insulating properties and economical advantages in material and application cost, is bein

[Related Keywords : ceramic fiber, insulation, silicate, bulk]

Portable Laser Marker CO2 Laser Marking Machine for Wood Acrylic

• Place of origin:  

  China

Fiber Cable Length3MRepetition Frequency Range20-100KHZResponse time0.5msEngraving lines1-10 lines(in the engraving area)Output Beam Diameter±0.5mmPower Range0-100%Laser Module Life>20000 hoursEngraving DepthAdjustable according to materialsMarking FormatGraphics, text, bar codes, QRcode, automatically date, batch number, serial number, etc.Graphic format supportedAi, plt, ;dxf, dst, svg, nc, bm

[Related Keywords : Laser Marking Machine]

MOSI2 Furnace

Ceramics Fiber Embodied high insulation & low weight Précising control of temperature MoSi₂Furnace Model AJ-SK B1 AJ-SK B2 AJ-SK B6 AJ-SK B7 AJ-SK B8 Dimension Inside(WxHxD) 120x150x200 150x150x250 200x200x300 400x300x400 400x300x500 Material Interior Ceramic Molded Module Extenrior Steel plate with powder coating Temperature Controller Program P.I.D Controller (2pattern, 20Segment

[Related Keywords : MoSi₂FURNACE, Furnaces, ELECTRIC FURNACE]