Place of origin:
China
Supply Ability:
50 per year
Test Equipment Co., Ltd specializes in environmental simulation and test chambers including temperature humidity chambers, ozone aging chambers, UV aging chambers, salt spray chambers, rain fall waterproof chambers, blowing dust sand proof test machines, dynamic mechanical load testing equipment, walk in climatic chambers, solar raddiation testing chambers, altitude test chambers, and so on for v
[Related Keywords : solar panel test machine, mechanical load tester, pv module test machine, wind resistance tester]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Supply Ability:
3 sets/month
Description enviClone Dual Static and Cyclic (Dynamic) Mechanical Load Tester or Testing Machine is a specially designed for IEC61215 standard MQT16, MQT20 clauses and IEC 62782 to test impact resistance of photovoltaic modules solar panels. By arranging multiple cylinders on the surface of the component, the cylinders can expand and contract to exert tension and pressure on the surface of the co
[Related Keywords : solar panel test machine, photovoltaic module test, pv modules tester, pv module test equipment]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
The machine is mainly used for the dynamic and static mechanics performance tests to material and parts, equipped with corresponding accessories, it can do tensile, compression, low cycle and high cycle, crack growth tests and other mechanics tests for various kinds of materials, and it widely used in the fields of aviation and aerospace, ship-making and military industries. If the relevant grips
[Related Keywords : Fatigue testing machines, dynamic testing machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Place of origin:
Japan
oil and dust, etc. Fix the enclosed cable to the motor. When the motor shaft is turned by hand, it may seem heavier than other servomotors, or may seem tight. This is caused because of the dynamic brakes in the built-in amplifier, and is not a fault.Fully closed self-cooling: Protective structure IP65 (Excluding MF23 connector. Protection applies for all connectors when engaged to machine.)
[Related Keywords : MITSUBISHI, Servo Motor, HS-MF23EXV-S2, MITSUBISHI HS-MF23EXV-S2]
Business Type
Supplier
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
10 Unit
Price:
US$ 115
Place of origin:
China
dynamic applications. Application Robotics Industry: Handling lightweight components and precise positioning with medium-sized robotic arms. Automated Testing Machinery: Suitable for precision repetitive testing and measurements. Precision Machining: Enables precise operations with a high-resolution encoder. Laboratory Automation: Ideal motor for rapid movements and precise control of lab equipme
[Related Keywords : Servo motor, Panasonic Servo motor, 100W Servo motor, AC Servo motor]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
1 - 5
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 35000
Place of origin:
China
dynamic balance of the concentration of various harmful substances (impurities) in the plating solution. These balances are the premise for stable product quality. Specialized plating solution analysts can not only regularly analyze and observe the composition and changes of the plating solution, but also find the cause of the failure through observation, analysis and small-scale tests when there
[Related Keywords : rotogravure cylinder, auto plating line, gravure machine, engravure machine]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
30000Sets per Month
testing technology and precision testing equipment combined with ISO quality system and strictly in accordance with GB3.7-1996 national standard. For example, the outer spherical ball bearing with top wire is applied to the through shaft with large rigidity and deflection. The bearing has sealing ring on both sides to prevent the intrusion of dirt. The factory is loaded with a proper amount of lu
[Related Keywords : insert ball bearings units, ball bearing]
Business Type
Supplier
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
1000sets/year
2.1 Turning thread (female/male thread, include special thread) on drill collar and drill pipe joint, tube coupling etc, diameter≤φ240 2.2 It is the 45°inclined machine bed, use heavy-duty roller straight-line guide rail, can bear heavy duty cut. It has the features of low friction coefficient, good dynamic property, good rigidity and stability, convenient to operate and remove chips, good wa
[Related Keywords : lathe machine, cnc pipe thread machine, pipe threading lathe, cnc lathe]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
1000set/year
HYSK-630TA pipe threading lathe, turning thread (female/male thread, include special thread) on drill collar and drill pipe joint, diameter≤φ310 It is the 45°inclined machine bed, use heavy duty roller straight-line guide rail, can bear heavy duty cut. It has the features of low friction coefficient, good dynamic property, good rigidity and stability, convenient to operate and remove chips, g
[Related Keywords : CNC lathe, Pipe threading machine, Pipe threading lathe, Drill collar threading lathe]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
machine: 620mm×520mm×485mm, gas collection mechanism: 320mm×210mm×480mm. Functional features 1. Compatible with water-entry, retention, and dripping tests in addition to the water-reactive gas release test; 2. Combines pressure balance with the gravimetric method, maintaining dynamic balance between the system pressure and external pressure during the test, and converting gas volume measur
[Related Keywords : Water-reactive Gas]
Business Type
Manufacturer
Location
浙江, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
life of hydraulic cylinders is much higher than that of ordinary hydraulic cylinders, and It is convenient to replace the hydraulic cylinder after it is damaged. (6) Testing agency. The clamping and relaxation of the hydraulic chuck and the top tightening and relaxation are detected through the positioning plate and the proximity switch, making the machine operation safer and more reliable.
[Related Keywords : new hydraulic chuck]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Testing Facility Three-dimensional measuring instrument (CMM), Salt spray test box, Dynamic balance detector, Pneumatic detection Features & Advantage 1. High strength and not easy to deform, has good electrical and thermal conductivity. 2. High finish appearance,smooth surface roughness is Ra1.6 after machining. 3. Smooth appearance, corrosion resistance. 4. Pass Salt Spray Test with 144 Hours.
[Related Keywords : Grey Iron casting, ductile Iron casting, Stainless steel casting]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Testing Facility Three-dimensional measuring instrument (CMM), Salt spray test box, Dynamic balance detector, Pneumatic detection Features & Advantage 1. High strength and not easy to deform, has good electrical and thermal conductivity. 2. High finish appearance,smooth surface roughness is Ra1.6 after machining. 3. Smooth appearance, corrosion resistance. 4. Pass Salt Spray Test with 144 Hours.
[Related Keywords : Pump Housing, Aluminum Casting]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Testing Facility Three-dimensional measuring instrument (CMM), Salt spray test box, Dynamic balance detector, Pneumatic detection Features & Advantage 1. High strength and not easy to deform, has good electrical and thermal conductivity. 2. High finish appearance,smooth surface roughness is Ra1.6 after machining. 3. Smooth appearance, corrosion resistance. 4. Pass Salt Spray Test with 144 Hours.
[Related Keywords : Ductile Iron Casting, Aluminum Casting]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
60 sets per month
Impact Tester Motorized Charpy Machine/Charpy Impact Testing Machine Impact Tester Motorized Charpy Machine/Charpy Impact Testing Machine is used to test metallic materials to resist the impact to determine the nature of the material under dynamic load performance. It’s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science res
[Related Keywords : impact testing machine, impact tester, charpy machine, Charpy Impact Testing Machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Place of origin:
China
Supply Ability:
2000 pcs/ month
ultrasonic flaw detector Introduction It can be used in a lab or field. The instrument can be widely used in any fields that need defect inspection and quality controlling e.g. manufacturing industry, iron & steel metallurgical industry, metalworking, chemical industry, etc. This machine is also used broadly in the active safety inspection and service-life evaluation such as aerospace, railway tr
[Related Keywords : ultrasonic flaw detector]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Unit
Price:
US$ 12
Place of origin:
China
machinery. 4. There are two types: Fixed coupling and movable coupling. 5. In high-speed and heavy-load power transmission, some couplings could buffer and absorb shock to improve the dynamic performance of shafting. Braking-wheel Coupling 1. Application scope: Connecting different mechanism 2. It's constituted by two parts. One connects the drive shaft, another connects the driven shaft. 3. It'
[Related Keywords : Crane Coupling, crane parts, crane accessories, crane]
Business Type
Supplier
Location
Beijing, China
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear Features: The main components of the instrument are made of natural granite material,with a fixed structure, no deformation, and good thermal stability;, Upper and lower computer control technology; Workpiece installation error correction technology; Geometric error correction technology for instrument hosts; The straight axis adopts
[Related Keywords : Gear measuring machine, gear testing machine, gear inspection machine]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
1 Piece
Price:
US$ 5000
Place of origin:
China
dynamic response (lag time <0.10s), high detection accuracy (<±05mm), and large measurement range (0-150mm). The selected electromagnetic field frequency ensures that the level detection probe only detects the level change of the mold and does not detect the mold flux or steel slag layer. The system has the advantages of simple operation and no radiation protection problems. The system is insens
[Related Keywords : mould level measurement, continuous casting strand, mold level control system]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
dynamic measurement accuracy of the measuring machine; All three axes are equipped with a static pressure floating guide rail composed of self-cleaning pre load high-precision air bearings. The bearing has a large span, strong resistance to angular swing, low resistance, no wear, and smoother movement. The three-axis adopts high-quality granite with a small coefficient of thermal expansion and th
[Related Keywords : measuring machine, UCC controller, AC-DMIS]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Competitive dynamic testing machine products from various dynamic testing machine manufacturers and dynamic testing machine suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
