Place of origin:
China
mechanism to either block or allow the flow. Resilient-seated gate valves have a rubber or elastomer seat that provides a tight seal against the gate when the valve is closed, preventing any leakage through the valve. In the context of BS5163, a gate valve rated PN16 would have a flanged end connection and be suitable for use in waterworks applications with a maximum operating pressure of 16 bar.
[Related Keywords : bs5163 gate valve pn16]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
30 Gram
Price:
US$ 0.1
Place of origin:
China
mechanical performance Good weather resistance. Application scope: mobile phones, communication devices, network terminals, storage devices, security devices, power devices, LED lighting fixtures, etc. Test Item Unit YL-1700S-15 YL-1700S-35 YL-1700S-60 Test Method Gravity g/cm3 2.6 2.9 3 ASTM D792 Thermal Conductivity W/m.k 1.5 3.5 6 ASTM D5470 Extrusion Volume g/min 65 60 20 YL METHOD Dielectr
[Related Keywords : Conductive Silicone, Single component Silicone, Two component Silicone, Sealing Conduct Silicone]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
1000 Kilogram
Price:
US$ 5
Place of origin:
China
Supply Ability:
2000 tons/year
seals, or flexible components, POE is the go-to choice provided by the leading plastic resin suppliers for high-quality elastomeric solutions. ExxonMobil 6202 A high-performance polymer with exceptional mechanical properties, chemical resistance, and heat stability, commonly used in automotive components and appliances. ExxonMobil 3980 A specialized polymer formulation known for its outstanding c
[Related Keywords : poe resin]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. 40PV-TSP(R) Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction desi
[Related Keywords : Vertical Slurry Pump, Slurry Pump, pump parts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Elastomer or high chrome alloy liners provide corrosion &abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life ● Large diameter, high efficiency impellers designed to offer maximum wear life and low operating cost, wide options of impeller for specific applications ● Gland dry seal, expeller wet seal or mechanical seals are available to suite d
[Related Keywords : China Slurry Pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 6500 ~ 20000
Place of origin:
China
seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use packing seal with expeller seal together. √ The discharge outlet can be positioned at intervals of 45 degrees by request and oriented to any 8 positions to suit installations and applications.2.Tobee® 14/12 ST AHR Rubber Lined Slurry Pump Performance Parameters: Model Max. Power (kw) Materials Clear wa
[Related Keywords : Iron slurry pump, Steel slurry pump, Sand slurry pump, Coal slurry pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
280~320 sets of molds
seal Part function: Inserted Molding Tools for BMW automotive products. Part material: TPU+ metal Cavity: 2+2 cavties Insert Injection Molding Benefits Metal inserts and bushings are commonly used for reinforcing the mechanical properties of the plastic parts or thermoplastic elastomer products that are created through the insert injection molding process. Insert molding provides a number of bene
[Related Keywords : INSERTED MOLDING TOOL, Insert Injection Molding, Plastic Injection Tool, Injection Mold]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Set
Price:
US$ 10 ~ 10000
Place of origin:
China
Heavy Duty seal consists of two separate metal seal rings and two square o-rings that provide elastic compression within housing bores and it also called square bore face seal, HDDF. Fuyote available heavy duty seals sizes: 59~800mm Metal Seal Ring Material: Fuyote's metal seal rings are manufactured of high alloy cast iron. Fuyote offers two kinds of material for seal rings. Elastomer components
[Related Keywords : m etal face seals]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 2300~2500
Place of origin:
China
elastomer.• Elastomer seal rings back all liner joints.•Pump casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.• Impeller-front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
[Related Keywords : Drilling Mud, Sand Centrifugal Pump, Oil Base, Solids Control]
Business Type
Manufacturer
Location
河北, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
500 Kilogram
Price:
US$ 30
Place of origin:
China
sealing characteristics, entire product solution could be formed fast. Technical Data of Injection Molding TPU Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 1182B-RSS-1531S 1182B-RSS-1531S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Mechanical Properties Elongation ISO37:2017 200mm/min % 51
[Related Keywords : tpu moulding]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Piece
Price:
US$ 1000 ~ 3000
Place of origin:
China
Name Slurry Pumps Model AH Shaft seal Module Design Expeller drive seal, Packing seal, Mechanical seal Material Liner and Impeller Metal, Rubber, Ceramic, Polyurethane Farme Type A, B, C, D, E, R, F, G, S, T Drive Type CR, CV, ZV, DC Tobee® AH Slurry Pumps Presentation: Tobee® AH slurry pump are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general ind
[Related Keywords : variable speed slurry pum, slurry pump for dredger, ash slurry pump, ah slurry pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Sealing Rings An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. The O-ring may be used in static applications or in dynamic applications where there is relative motion
[Related Keywords : Sealing Rings]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Piece
Price:
US$ 1200
Place of origin:
China
Supply Ability:
2000 pieces per Month
elastomer for TPR. • Discharge Pipe - Metal for TP, elastomer covered for TPR. All wetted metal parts are completely rust protected. • Submerged Bearings - None • Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye. • Materi
[Related Keywords : molten salt pump, vertical slurry pump, axial flow pump, submerged pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
sealed. 3. Aluminum is thin and light. Today car industry focuses more on reducing weight of the whole car, thus aluminum which is a light material will be more beneficial to car producers. PP Material PP materials have many good characteristics. As a type of material which is applied widely in packaging industry, PP material has good mechanical strength. PP materials also have high chemical resi
[Related Keywords : Aluminum Alloy Core]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
elastomer components by protecting surfaces and modifying surface properties.These improvements are made without degrading the functional performance of the part.Objects coated with this polymer film include a diverse range of rubber components, ranging from gaskets and seals to rubber keypads and medical catheters. More information please view our web: https://www.hnsolarchem.com/ More informati
[Related Keywords : Parylene Powder, Parylene F, Parylene D, Parylene C]
Business Type
Supplier
Location
Hunan, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Competitive elastomer mechanical seals products from various elastomer mechanical seals manufacturers and elastomer mechanical seals suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
