Ferrous Insert Wholesale

IHF Fluorine Plastic Centrifugal Pump

• Place of origin:  

  China

• Supply Ability:  

  10000pcs per month

Operating range: Flow:2-1200m³/h Head:4-127m Range of working temperature:-20~150°C IHF Fluorine plastic centrifugal pump This pump is widely used in such industries as petrochemicals, acid / alkali making, non-ferrous smelting, acidwash in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, elec-tro-plating and radio. It is suitable for transporting

[Related Keywords : Centrifugal Pump]

IHF-D Type Fluoroplastic Corrosion-resistant Centrifugal Pump

• Min. Order:  

  1 Piece

• Price:  

  US$ 598 ~ 5985

• Place of origin:  

  China

ferrous metal smelting; chlorine water, wastewater treatment and acid addition in ionic membrane caustic soda projects. It is a derivative product of IHF, while retaining the performance of IHF, it is a product developed to meet the constraints of the workplace。 Fluoroplastic Centrifugal Pump Features The flow-passing parts are all closely lined with fluoroplastics, and the load-bearing part o

[Related Keywords : fluoroplastic pump, centrifugal pump, chemical Pump, single stage pump]

Type W Silicon Carbide Heating Elements

• Place of origin:  

  China

• Supply Ability:  

  15000 permonth

ferrous metal melting and holding, glass melting and refining, brazing, sintering of powdered metal components, and pre-sintering of powders for lithium ion battery cells. QS2 Coating This coating is a silicon carbide/silica composite. It is applied in 2 parts, an organic based pretreatment followed by a mix of silicon carbide and colloidal silica. The coating is cured to provide an adherent co

[Related Keywords : SiC, Heating Element, Heating Rod, Furnace]

Eddy Current Testing Equipment for Tube, Bar and Wire

• Place of origin:  

  China

ferrous metals, austenite, stainless steel tubes, rods and discs. It can be widely used for on-line or off-line NDT non-destructive testing of raw materials in energy, petrochemical, bearing, automobile, transom manufacturing, household appliances and other industries, such as bearings, raw materials of high strength bolts, copper, aluminum tubes of various refrigeration equipment, condenser tube

[Related Keywords : ndt testing equipment]

High Precision Stamped Metal Parts Wholesale Factory Metal Stamping Parts Customized Stamping Parts

• Min. Order:  

  1000 Piece

• Price:  

  US$ 0.15~0.5

• Place of origin:  

  China

ferrous alloys and can identify "cost down" solutions before a die is built. We accept OEM&ODM CNC machined processing.raw material about Aluminum,Brass,steel,and stainess steel,our CNC machined parts can be up to 0.01mm tolerance.2m*500mm CNC machined parts can be made in our factory. We provide one-stop services and own independent right of import and export. Be Our Partner Today If you are int

[Related Keywords : metal stamping, stamped metal parts, high precision metal part, metal fabrication]

Soldering Brazed PCBN Inserts

• Min. Order:  

  2 Piece

• Price:  

  US$ 10

• Place of origin:  

  China

The Soldering BrazedPCBN inserts are welded directly onto the blade base to form a growing, super strong structure, without the risk of layering or cracking. Soldering Brazed PCBN tools provide exceptional performance in precision machining of a wide variety of hardened and abrasive ferrous and superalloy materials. Acquiring more infomation you can contact me:Email:erinATmoresuperhard.com Whatsa

[Related Keywords : Solderinng Brazed PCBN]

PCBN & PCD Inserts

Yuyoul PCBN inserts are used in a wide range of machining operations such as turning & milling, grooving, boring and etc for machining hardened ferrous materials. They are extremely hard consisting of polycrystalline cubic boron nitride with metallic or ceramic binder. Yuyoul PCD inserts are extremely hard consisting of polycrystalline diamond tip brazed to carbide inserts according to the variou

[Related Keywords : inserts]

Carbide Indexable Inserts

• Min. Order:  

  No minimum order quantity

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  Large

CARBIDE INDEXABLE INSERTS: Specialty of Product: K10, K20, K30, P20, P30, P10, YG6, M10, M20.etc. Tursted quality, excellent performaces Our carbide inserts, tips are made from the Virgin Raw materials and HIP Sintered, be of very good quality and performances, there are many grade available for the metal-cutting, no-ferrous metal cuting, etc. Welcome your inquiry!

[Related Keywords : Tungsten carbide inserts, carbide milling tools, carbide buttons, carbide blanks]

Carbide Turning Inserts for Aluminium RCGT

• Min. Order:  

  10 Piece

• Price:  

  US$ 3

• Place of origin:  

  China

• Supply Ability:  

  30000 pcs/ month

SMT offers a full range of high polish carbide aluminum inserts, single-sided and double-sided with molded chip-breakers. SMT Carbide Aluminum Inserts are in carbide grade micro-grain K10, uncoated, highly polished and ground, mainly suitable for the finishing operation of non-ferrous metals in continuous and intermittent conditions. 1. Polished top surface, peripherally ground 2. High rake angle

[Related Keywords : carbide inserts for aluminium, aluminium turning, turning inserts for aluminium, aluminium turning inserts carbide]

OEM Tungsten Carbide Products

• Min. Order:  

  1 Kilogram

• Price:  

  US$ 50

• Place of origin:  

  China

• Supply Ability:  

  10ton/month

ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nYG3XK0115.1-15.4≥1300≥91.5YK05　14.95250090.5Mostly used as the buttons of small and bits medium sized percussionYG8C　14.8240088.5and as the inserts of rotary prospecting bits to cut soft and medium hard formations.YG6　14.9519

[Related Keywords : tungsten carbide, OEM, cemented carbide]

Turning Indexable Cutting Insert NL Series

• Place of origin:  

  China

• Supply Ability:  

  8000000 pcs per Month

The preferred chip-breaker suitable for aluminum alloy and non-ferrous metals materials, semi-finishing and roughing machining; Unique three-dimensional chip breaker and sufficient Chip Pocket can efficiently guarantee chip break and chip removal performance; Large rake angle and back angle form sharp cutting edge, it’s optimized quick cutting and lower cutting loading; Special design in cuttin

[Related Keywords : cutting insert, turning insert, carbide insert]

Deep Hole Drilling Tool Npht09004rg BTA Head Carbide Inserts Metal Drill Insert

• Min. Order:  

  10 Piece

• Price:  

  US$ 5.5~5.82

• Place of origin:  

  China

quality, professional technical support Product Description Cutting edge length 0.394″ Application| Drill Mill | Drilling |Insert width0.354″ Number of cutting edges 2 Insert Thickness (S)0.157″ Measurement Type Inch Corner Radius (RE)0.016″ Cutting Direction (HAND)Right hand Coating TiAlN Body Material Steel Applicable material| Stainless Steel | Non Ferrous Metals | Hi Temp Alloys |

[Related Keywords : drilling inserts, drill insert, NPHT09004, indexable insert]

Pcd Standard Tools TCGW090202-GS

• Place of origin:  

  China

insert is the best for machining non-ferrous metals and non-metal. It has replaced tungsten carbide and ceramics in a range of high speed performance applications including the turning, boring, milling, slotting and chamfering of materials such as high-silicon aluminum, metal matrix composites (MMC), ceramics, reinforced epoxies, plastics, carbon-fibre-reinforced plastics (CFRP) and engineered wo

[Related Keywords : PCD STANDARD TOOLS]