Min. Order:
1 Unit
Price:
US$ 10000
Place of origin:
Korea
Supply Ability:
10 Units per Month
Reduction Gears offer the ability to change engine speed and or the direction of rotation to closely the driven equipment’s most efficient operation speed. Combined with a clutch or coupling, reduction gears provide a compact easily aligned package which mounts directly to the engine. Reduction gears are designed for out shaft side loading to accommodate chain and sprocket or v-belt final drive
[Related Keywords : Gearbox]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Unit
Price:
US$ 12000 ~ 39000
Place of origin:
China
Supply Ability:
5000unit
Power Terminating Brake Steering Angle ±36 o Hydraulic System Min. turning radius 6581mm Digging Power of Excavator Grab 46.5KN Pressure of the system 12Mpa Digging Power of Dipper 31KN Axle Bucket Lifting Time 6.8S Manufacturer Bucket Lowering Time 3.1S Feicheng Axle Factory Main Transmission Type Double Reduction Bucket Discharge Time 2.0S The parameters are subject to change without notice
[Related Keywords : Backhoe loader, backhoe excavator, road machinery, construction machinery]
Business Type
Supplier
Location
Henan, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1set
Place of origin:
Korea
Price Condition:
FOB Korea any port
Supply Ability:
500sets per month
Travel device Fully hydrostatic. Each track driven by an independent, two speed, axial piston hydraulic motor with planetary reduction gear. Drive motors are protected within the shoe width. Automatically operated parking brake is spring applied when machined is stationary. Engaging foot pedals or levers automatically releases the brake. We are controlling minimize tolerance for our products to
[Related Keywords : Excavator parts, Travel reduction gear, Reduction gear, Final drive gear]
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Unit
Price:
US$ 3890 ~ 5590
Place of origin:
Singapore
final drive ratio, zero-maintenance self-adjusting time chain and don’t forget the Suzuki Lean Burn Control System. Features may include:Multi Point Sequential Electronic Fuel InjectionSuzuki Lean burn Control SystemSuzuki Troll Mode SystemTwo-Stage Gear Reduction SystemOffset DriveshaftDirect IgnitionSuzuki Easy Start SystemOver-Rev. LimiterLow Oil Pressure CautionFully Transistorized Ignition
[Related Keywords : Suzuki Outboard Motor, Outboard Engines, Outboard Boats, Boat Engines]
Business Type
Supplier
Location
Singapore, Singapore
Employees Total
1 - 5
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Unit
Price:
US$ 5 ~ 7
Place of origin:
China
geared dc motor, worm gear stepper motor, Micro Dc Geared Stepper Motor 25BYJ412-1L stepper motor is mainly used in the fields of printer, valve, fluid control, position control, etc. This motor has the characteristics of small size, high precision and high strength.The stepping motor has a built-in reduction gearbox to achieve a reduction ratio of 1:10, improve the torque, and finally use the ou
[Related Keywords : Geared Stepper Motor, Linear Stepper Motor, Stepper Motor]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
39Q6-40100 Condition:100% New In Stock:Yes MOQ:1 PC Payment Methods:Western Union, T/T Related Final Drive Parts Machine ModelPart NumberR140LC-9 TRAVEL REDUCTION GEAR31Q6-40020R210LC-9 TRAVEL MOTOR ASSY31Q6-40030R210LC-7A TRAVEL MOTOR UNIT39Q6-41101R210LC-7A TRAVEL MOTOR UNIT38Q6-41100R210LC-7A TRAVEL MOTOR UNIT31N6-40032R210LC-9 TRAVEL MOTOR ASSY31Q6-40032 Hydraulic Parts Buyer Feedback
[Related Keywords : Excavator Final Drive Mot]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
reduction is critical. Additionally, titanium oval tubing has a very high strength-to-weight ratio, meaning it is strong enough to withstand heavy loads while remaining lightweight. The excellent corrosion resistance of titanium also makes it suitable for use in harsh environments such as seawater or acidic solutions. Furthermore, the exceptional biocompatibility of titanium makes it an excellent
[Related Keywords : Titanium oval tubing]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
500 Piece
Price:
US$ 5
Place of origin:
China
Gearing optimised for maximum force reduction with minimum dose knob extension for optimal user experience * Large dose display for good readability even for visually impaired patients * Audible and tactile feedback during dosing, dose correction and delivery to maximize patient confidence * Pre-injection remaining dose indication for the final dose ensuring correct dosing up to the last drop * D
[Related Keywords : Insulin Injection pen, Insulin pen, pen injectors]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
FINAL DRIVE:The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service. UNDERCARRIAGE SYSTEM:Inner and outer beam of track roller frame are rectangular section.Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal. TRACK ROLLER (each side): Si
Business Type
Manufacturer
Location
Hebei, China
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Place of origin:
Korea
Price Condition:
FOB
DSM supplies Hydraulic Pump and Motor Assembly for Korean Excavator and also, Gear(Pilot) Pump for various Excavators Hydraulic Main Pump Assembly with regulator Travel Motor with final drive Assembly Swing Motor with Reduction Assembly Gear (Pilot) Pump for Komatsu, Hitachi and all Korean Excavator
[Related Keywords : hydarulic pump, motor assembly]
Business Type
Supplier
Location
Seoul, Korea
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 35000
Place of origin:
China
final output size etc. We could work out a suitable proposal for our clients. After being shredder by the machine, the output material could be used directly or go int to the next step of size reduction. With the function of PLC microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. The
[Related Keywords : crush, shredder, plastic, double shaft shredder]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
HANGIL SV. Auger (Drill) Crane Truck Specification Classification Model HGA984W Auger (Drill) Diameter φ350 Working depth 3m(base level : Ground) Working area 3.0m ~ 10.1m Torque 827Kgfm Reduction ratio 35:1 Vehicle Chassis 9.5 ton (wheel base: long) Dimension (Length*Width*Height) 9,000mm X 2,300mm x 3,700mm Drive method 6X4 Engine max torque 115Kg.m/1200rpm Engine power 320ps / 135 2,200rpm
Business Type
Manufacturer
Location
Chungcheongbuk-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Price:
USD 2900
reduction ratio: 3.350 (67/20) Gear ratios: 1st: 2.142 (30/14) Gear ratios: 2nd: 1.769 (23/13) Gear ratios: 3rd: 1.444 (26/18) Gear ratios: 4th: 1.200 (24/20) Gear ratios: 5th: 1.045 (23/22) Final reduction ratio: 3.692 (48/13) Clutch: Wet multi-disc, manual Frame Frame type: Perimeter, aluminium Rake/Trail: 27.7°/122.3 mm Wheel travel, front: 315 mm Wheel travel, rear: 310 mm Tyre, front: 80
[Related Keywords : motorcycle, 2011 Kawasaki KX450F]
Business Type
Supplier
Location
China, Hong Kong
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
gears, mechanical control, gear shift collar, featuring high drive efficiency and low noise. 3、It adopts constant open main clutch with multi-disc wet friction disc and hydraulic boosting and the constant engaged steering clutch with multi-disc wet friction disc, which is convenient to operate. 4、The final drive adopts 2-stage straight teeth and large displacement gear reduction for great tra
[Related Keywords : bulldozer, bulldozers, bulldozer for sale, bulldozers for sale]
Business Type
Supplier
Location
Henan, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,000
Competitive final reduction gear products from various final reduction gear manufacturers and final reduction gear suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
