Place of origin:
China
https://www.suncenterbooster.com/products/hydrostatic-test-pump.html Hydrostatic Pressure Test Equipment Hydrostatic pressure testing is a common method used to test the integrity and strength of pipelines, vessels, and other pressure equipment. Hydrostatic pressure test equipment is used to conduct these tests, and typically includes the following features: High Pressure Capability: Hydrostatic
[Related Keywords : hydrostatic pressure te]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
4 Set
Price:
US$ 1000000 ~ 6000000
Place of origin:
China
Supply Ability:
6sets
A steel pipe hydrostatic pipe testing machine is a device that is used to test the strength and integrity of steel pipes under high water pressure. The machine applies hydraulic pressure to the interior of the pipe to determine if it can withstand the specified pressure requirements. This testing process helps ensure that the pipes are suitable for their intended use, such as transportation of li
[Related Keywords : pipeline hydrostatic test]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
Korea
pressure range : 0.15 ~ 1.2 MPa 3. Hydrostatic test pressure : 2.5 MPa / 5 min 4. Thermostat characteristics : Glass bulb 5. Operating temperature classification : 68 ℃ - Red / 93 ℃ - Green 6. Distribution of water direction : Upward (SSU) / Downward (SSP) / Sidewall, Horizontal (SSH) 7. Sensitivity characteristics classification : Standard response type (SR) / Early response type (QR)
[Related Keywords : Sprinkler Head]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
test, bending test, blow test, impact test), exterior size inspection, hydrostatic test, x-ray test. Advantages of SSAW steel pipe (1) The use of steel strips of the same width enables the production of steel pipes of different diameters, in particular the production of large-diameter steel pipes with narrow strip steel. (2) Under the same pressure conditions, the spiral welds are subjected to a
[Related Keywords : SSAW Steel Pipe]
Business Type
Manufacturer
Location
湖南, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1000 Kilogram
Price:
US$ 1.8
Place of origin:
China
Supply Ability:
700 metric ton
hydrostatic pressure resistance. SMS/SMMS/SSMMS fabrics are also used for core wraps, dusting layers, front and back flaps. We also produce spunbond (SS), SMS and SMMS nonwovens for the medical industry, from disposable surgical sets to other hospital textiles. Our laboratories also perform tests for penetration time, rewet, liquid penetration resistance (water column) and other physical properti
[Related Keywords : SMS nonwoven fabric, SMMS nonwoven fabric, Medical Nonwoven fabric]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 1800 ~ 2000
Place of origin:
China
Pressure test with gas - Gas transfer and filling - (Argon/Helium/Hydrogen/Oxygen/Nitrogen/Co2/CH4/LNG/LPG/CNG/FM200 etc.) - Charging of gas cylinder and accumulator with nitrogen - Supply for isolating gas systems - Gas assisted injection molding - Transfer of oxygen cylinders - Charging of breathing air bottles - Leak test - Hydrostatic Testing for valves, tanks, pressure vessels, pressure swi
[Related Keywords : oxygen booster pump, oxygen filling pump, booster pump]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Ton
Price:
US$ 750
Place of origin:
China
Supply Ability:
1000 Ton/Tons per Month
testing: a) Induction furnace and treated metal (Chemical analysis of raw material, spheroidizing & Nodularity) b) Casting (Visual check and weight check) c) Heat treatment (Micro structure) d) Hydrostatic test (Pressure test) e) Dimensional checks (Checking pipe length and joint, OD, wall thickness, appearance) f) Zinc spraying (Thickness testing) g) Lining and coating (100% visual check,
[Related Keywords : Ductile Iron Pipe, Ductile Iron Pipe fittings, Pipe Fitting, pipe]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Unit
Price:
US$ 120
Place of origin:
China
OverviewFeatures & Benefits304 L or 316Lstainless steel to resist corrosion.Range of cylinder sizes: 75 cc – 5000 cc.Stated pressure ratings are at 100 °F (37 °C).All cylinders have 1/4" female NPT threads on both ends.TPED-compliant cylinders available for EU community.Each cylinder is hydrostatically tested to at least 5/3 times the working pressure. ampling Cylinders are designed and manuf
[Related Keywords : Sample Cylinders, Double-Ended Cylinders, SS316]
Business Type
Supplier
Location
福建, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
hydrostatic relief devices, liquid level gauges, pressure relief devices, liquid withdrawal tubes, various bonnet assemblies, and various outlet connections. Choose ABYDA Company for your LPG valve needs, and experience the difference that comes from working with a trusted and reliable LPG valve manufacturer. Contact us today to learn more about our products and services or to place an order for
[Related Keywords : LP Gas Regulator, LPG valve, LPG fittings]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Ton
Price:
US$ 1
Place of origin:
China
Supply Ability:
5000Ton/Year
Testing Methods Pressure test,Flaw detection,Eddy current testing, Hydrostatic testing or Ultrasonic examination and also with chemical and physical property inspection Packaging Small pipes in bundles with strong steel strips,large pieces in loose Also according to customer's requests Application Conveying oil gas and water Certificates API ISO MOQ 10 tons Supply Capacity 5000 T/M Delivery Time
[Related Keywords : Carbon Steel Seamless Pipe, Seamless Steel Pipe]
Business Type
Supplier
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Price Condition:
FOB
pressure-containing parts are hydrostatically tested prior to assembly. Operating Instructions Main specification of Mud Manifold Mud manifold unites and divides mud during drilling, in order to have enough mud to drill through top drive. Working pressure: 2000PSI~20000PSI Nominal Bore: 2.1/16"~4.1/16"(46mm~103mm) Working Medium: oil, natural gas, mud Working Temperature: -46°C~121°
[Related Keywords : Manifold, Choke Manifold, Kill Manifold, Wellhead Equipment]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
tested for pressure fatigue, torsion and bending to provide a design that is physically stronger than the pipe it is attached to. Changhao is fully qualified to provide internal magnetic particle testing, ultrasonic and liquid penetration inspections, and NDE test reports to meet customer requirements. Each of our Changhao is fully factory assembled and hydrostatically tested to 1.5 times the wor
[Related Keywords : insulating joint]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Video
Place of origin:
China
pipes for other purpose. Detailed PhotosProcess flow of spiral welded pipe unit: Winding up → uncoiling → leveling → shearing and butt welding → disc shear → edge milling → delivery machine → pre bending guide plate → forming → internal welding → external welding → cutting → pulling out → flat head chamfering → hydrostatic test → collection of finished products
[Related Keywords : pipe welding machine, pipe mill, pipe welding, steel pipe]
Business Type
Supplier
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
5 Ton
Price:
US$ 550 ~ 750
Place of origin:
China
Supply Ability:
10000 Ton/Tons per Month
10, HG5, DF08 SPHC, M8 Length：Random length or cut length 6m End: Plain end or threaded end Surface: Hot dip galvanized, Electro galvanized Test：Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield, strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
[Related Keywords : galvanized steel pipe price, steel pipe galvanized, galvanized steel pipe]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
Supply Ability:
30000PCs per month
Pressure Feed Water Heater of Thermal Power Station Advanced capabilities for U-bent tubes: 1. Reliable bending machines 2. Precision bending dies 3. Eddy current test before bending 4. Bending up to 105’(32m) developed length 5. Electric resistance stress relief annealing after bending 6. Hydrostatic test after bending 7. OD and WT reduction Testing 8. Full bending radius and tube legs
[Related Keywords : Hot Bend U, U Shaped Bend, Pipe]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Ton
Price:
US$ 400
Place of origin:
China
Supply Ability:
8000 tons/month
pressure&low temperature resistance 2. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength,Yield strength, Elongation), Technical Properties (Flattening Test, Blow Test, Impact Test,DWT test), Exterior Size Inspection, Hydrostatic Test, X-ray Test,UT test. 3.Application:The base metal and weld metal were tested according to the pipe specification API SPEC 5L PSL1,
[Related Keywords : API 5L X70M PSL2, LSAW/DSAW PIPE, API 5L X70, X70 steel pipe]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
10 Ton
Price:
US$ 3580~3600
Place of origin:
China
Supply Ability:
200 Ton/ Sets per Month
China Behind MOQ : 20Ton LEAD TIME : 30 DAY Application :Lighting, solar reflector, building appearance.Interior decoration: ceiling, wall, car interior and exterior decoration.Chemical / insulating pipe coating.Technology: cold drawing / cold rollingTesting and inspection: tensile test, flaring test, flange test, reverse test, hardness test, hydrostatic or non-destructive electrical test, etc
[Related Keywords : aluminum pipe, aluminum, car refrigerator system, refrigeration system]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
steel is non-magnetic and has high toughness and plasticity, but the strength is low, it is impossible to strengthen it through phase change, and it can only be strengthened by cold working, such as adding S, Ca, Se, Te and other elements, it has good machinability. Product Testing Coating Thk Test Geometry inspection Ultrasonic Inspection Nondestructive Testing Hydrostatic Testing Image
[Related Keywords : 1.4057 seamless pipe, Large diameter pipe, Small diameter pipe]
Business Type
Supplier
Location
Zhejiang, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
testing, until confirming that the defects have been cleared. (12) The pipe where the strip butt-welded seam and spiral welded seam intersect and d-type joints are located is examined by X-ray TV or film. (13) Each steel pipe undergoes a hydrostatic pressure test, and the pressure is radially sealed. Test pressure and time are strictly controlled by the steel pipe hydrostatic microcomputer monito
[Related Keywords : ssaw tube mill, steel tube mill, spiral pipe mill line, spiral pipe welding]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 100
Place of origin:
China
ASTM A795 Steel Pipe For Sale ASTM A795 is the standard for black and hot dipped zinc coated (galvanized) and electric welded pipe designed for fire protection specification by the American Society for Testing and Materials. This type of piping is suitable for mechanical and pressure applications as well as for the general use of steam, water, air, and gas piping. As one of the most reliable ASTM
[Related Keywords : ASTM A795 Steel Pipe]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Competitive hydrostatic pressure test products from various hydrostatic pressure test manufacturers and hydrostatic pressure test suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
