Place of origin:
China
Supply Ability:
2000 pcs/ month
Portable Hardness Tester Features ● Compact plastic case, suitable for use under poor working conditions. Test at any angle, even upside down. ● Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL ● Large LCD screen, showing all functions and parameters. With EL background light. ● Large capacity memory co
[Related Keywords : Portable Hardness Tester]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
5 Piece
Price:
US$ 500 ~ 3000
Place of origin:
China
material.- Using highly sensitive helium mass spectrometry leak detector to detect leaks, dffectively prevent hidden leakage points, leakage particles.- Ultra-high oil free vacuum system is adopted to guarantee the high vacuum of ceramic X-ray tube- The installation size is consistent with domestic and foreign similar brand products, applicable to all kinds of NDT equipment- Ceramic tubes are mor
[Related Keywords : X RAY flaw detector, X ray ceramic tube, X ray inspection, X ray generator]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
3 Ton
Price:
US$ 3200
Place of origin:
China
Supply Ability:
2000 tons per month
ASTM A213 T9 seamless alloy steel tubes is widely used for boiler, petrochemical etc. Please check the following data of this material: Chemical Composition: C: 0.15%(Max), Mn:0.3%-0.6%, P: 0.025%(Max), S: 0.025%(Max),Si: 0.25%-1%, Cr:8%-10%, Cr: 0.9%-1.1%. Mechanical Property: Yield: 205 Mpa(Min) Tensile: 415 Mpa(Min) Elongation: 30%(Min) Each tubes should be checked by NDT, we use Ultrasonic &
[Related Keywords : Seamless alloy steel tube, seamless boiler tube, boiler tube, ASTM A213]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1190
Place of origin:
China
(NDT) for all kinds of concrete compressive strength component in construct projects.. HT-225V Test Hammers for the quick and easy determination of the strength of concrete, and hardness of construction materials. Digital and voice functions allow greater number of test, leading to better quality tests. It’s a good and useful instrument for quality control and inspection organizations.
[Related Keywords : schmidt hammer, concrete test hammer, rebound hammer, digital test hammer]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Unit
Price:
US$ 3000
Place of origin:
China
Material:Stainless Steel 304/316,Carbon Steel Q235B/Q345R,Nickel Alloy,titanium,graphite etc Product Advantage High Performance,high quality control,professional welding,International standard and famous design software. 1.High pressure resistant,temperature resistant and corrosion resistant performance. 2.High quality control,including pressure testing and NDT Nondestructive Testing(RT,UT,PT,MT)
[Related Keywords : Shell Tube Heat Exchanger, shell tube exchanger, shell tube type heat, shell tube condenser]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
material to be processed. We are able to provide Professional Stamping Metal Molds with strong force back up technical assistance. These molds are mainly used for a wide variety of industrial fields. 4.Product Details In precision metal stamping, a mold is usually composed of two or more half-shells, ranging to delimit an area of the space with the shape of the piece to be obtained. The producti
[Related Keywords : Stamping Metal Molds]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
materials and surface conditions.Controlled particle size distribution: Steel grit can be produced with a tightly controlled particle size distribution, ensuring consistency in the abrasive action and surface finish. This allows for precise control over the surface roughness and texture, meeting specific requirements for different applications.Specialized coatings: Steel grit can be coated with v
[Related Keywords : Steel Shot Steel Grit]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Product descriptionBright Annealed Tubes DescriptionThe traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called clsoed furnace. The warmth handled
[Related Keywords : bright annealed stainless]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
United States
materials pose an inspection challenge due to their various shapes and thicknesses. Olympus offers complete solutions for the inspection of carbon-fiber-reinforced polymer structures. These solutions are based on the OmniScan flaw detector, the GLIDER™ scanner, and dedicated probes and wedges designed for CFRP flat panel and radius inspection. Weld Inspection of Small-Diameter Pipes -When coupl
[Related Keywords : Olympus Omniscan MX2]
Business Type
Supplier
Location
Florida, United States
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Features Treatment devices for rope terminals used for rigging, hoisting, towing and removing. 100% tension strength effect of wire rope's breaking load. Referenced US Federal specification RR-S-550D Available certificate of NDT (M/T, U/T), 3rd Inspection test report Special size, design and another material will can supply as your requirement. Specifications Size Dimension(in) Weight(lbs) A
[Related Keywords : wire rope end termination, Closed Socket, wire socket]
Business Type
Manufacturer
Location
Busan, Korea
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
https://www.radsafetech.com/material-defect-detector.html Material Defect Detector Non-destructive testing (NDT) spectrometers are analytical instruments designed to examine the composition and properties of materials without causing any damage to the tested objects. These spectrometers use various spectroscopic techniques to gather information about the material's chemical composition, structure
[Related Keywords : Laser Control]
Business Type
Manufacturer
Location
zhejiang, Singapore
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Twenty-Foot Container
Price:
US$ 3100
Place of origin:
United States
Supply Ability:
1
: C-scan flaw detection or thickness gaugingComposite material flaw detectionInvestment Castings Turbine bladesTube and Pipe Corrosion mappingStorage TanksBoilers GlassMetals, plastics, composites, glass, rubber ACCESSORIES : Various Transducer typesFull range of ScannersProtective carry case https://www.superindotech.com/flaw-detector/new-ndt-systems-raptor-flaw-detector---sale
[Related Keywords : NDT Systems Raptor]
Business Type
Supplier
Location
Jakarta Raya, Indonesia
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Place of origin:
China
Titanium Casting Titanium valve, titanium pump, titanium impeller, titanium hand tools ,titanium hammer head, titanium wrench, titanium customization, titanium parts which are difficult to machine. Material: Titanium and Titanium alloy Characteristics: High strength light weight corrosion resistant Standard: ASTM B367 Gr.C2, Gr.C3 Casting tolerance: ISO 8062 CT6-CT10 Applications : petroleum mac
[Related Keywords : imepller, titanium casting, ASTM B367, pump]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Price Condition:
FOB
high permittivity, coupling, and piezoelectric constant, but lower time stability. It is used in applications requiring fine movement control or for sensitive receivers. Its low Curie temperature restricts its operating temperature range. Applications include medical diagnostics, industrial NDT, STM/AFM, and nano-positioning. Our company also supply other piezoelectric materials. Thanks!
[Related Keywords : Piezoelectric, Ceramic, PZT, Navy Type]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
501 - 1000
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
8000 tons/month
A671 GR.CC70 CL22 LSAW Pipe A671 GR.CC70 CL22,LSAW pipe,A671 GR.CC70,welded pipe Pipe O.D:406.4~1422.4mm(16-56in) Pipe Length:3~12.5m Wall Thickness:8~50mm for material of common carbon, low carbon alloy; 6.4-26.4mm(0.252-1.04in) for material of middle carbon alloy structure steel, grade of higher than X70. (1)The pipe internal stress is very small and uniformly distributed after the full- length
[Related Keywords : A671 GR.CC70 CL22, LSAW pipe, A671 GR.CC70, welded pipe]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Supply Ability:
10000 Piece/Pieces per Month
Product Name Eco-friendy PVC Inflatable Jumping Hopper Ball With Horn Wholesale Material: PVC Color: Red, Blue, Yellow, Pink, Green or Custom Color Size: 45/55cm or Custom Size Logo: Custom Logo MOQ: 200pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Productio
[Related Keywords : Yoga Ball, Resistance Band Loop, Half Balance Ball]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Box
Price:
US$ 1
Place of origin:
China
https://www.ndtzkcx.com/noraml-a-scan-detector-series/ A digital ultrasonic flaw detector is a specialized instrument used for non-destructive testing (NDT) to detect and analyze defects or flaws in materials using ultrasonic waves. It is commonly used in industries such as manufacturing, aerospace, automotive, and construction for quality control and inspection purposes. The digital ultrasonic f
[Related Keywords : digital ultrasonic flaw d]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Competitive ndt material products from various ndt material manufacturers and ndt material suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
