Quenching Medium Wholesale

Induction Hardening Machine

• Place of origin:  

  China

The induction heating and quenching machine tool is one of Duolin complete sets of induction hardening equipment.The Vertical or horizontal machine tool is mainly used to process shafts parts, gear, bar and also can quenching some special workpieces. Technical information It is suitable for matching with high frequency, medium frequency induction power supply.The CNC hardening machine adopts liqu

[Related Keywords : Hardening Machine]

Hard Rail Turning Center

• Min. Order:  

  1 Set

• Price:  

  US$ 30000

• Place of origin:  

  China

Hard Rail Turning Center Equipment characteristics： The main unit structure is optimized through structural analysis, and the dynamic stiffness of the lathe bed can also be maintained during heavy cutting by reducing the height of the equipment. High strength HT300 cast iron machine bed with solid structure. Medium frequency quenched rectangular guide rail (52-54 °), one time clamping precisio

[Related Keywords : Hard Rail Turning Center]

Concrete Nails

• Place of origin:  

  China

Cement nails, commonly known as steel nails, are a kind of nails, made of carbon steel, made of 45 steel or 60 steel, processed by wire drawing, annealing, nail making, quenching and other processes, so the texture is relatively hard . Its function is to nail some hard objects that cannot be nailed by other nails, because the material is very different from ordinary nails, and it is a special nai

[Related Keywords : Wire Mesh, Fencing Mesh, Steel Wire]

Skew Rolling Machine for Steel Ball

• Min. Order:  

  1 Set

• Price:  

  US$ 15000

• Place of origin:  

  China

• Supply Ability:  

  100 sets per year

Quenching and tempering for the rolled red steel balls to make them get high and uniform hardness. The common current frequency for steel ball rolling line: 1.High frequency heating:100～500KHZ,usually use 200～300KHZ,mainly used for medium and small work piece. 2.Medium frequency heating:500～10000HZ，usually use 2500～8000HZ,mainly used for shaft with bigger diameter and large gear. 3.Line

[Related Keywords : steel ball production line, steel ball hot rolling, Steel ball rolling system, Steel billet hot rolling]

NM500 Abrasion Resistant Plate 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm

• Place of origin:  

  China

The NM series quenched and tempered steel produced is thin ingauge,good in shape, with sta-ble property and quality as well as high production efficiency.This series of product is applied to medium and heavy truck,dump truck,garbage collection truck, concretemixer,industrialfan,hop perand crushed aggregates etc. https://zgtsteel.com/nm400-steel-plate/ .HIGH WEAR RESISTANCE STEEL:( HARDOX 400, HAR

[Related Keywords : wear resistant steel, abrasion resistant plate, hardox500, abrasion-proof steel]

The 25th China(Guangzhou) Intl Die Casting Foundry & Industrial Furnace Exhibition

• Min. Order:  

  9 Square Meter

• Price:  

  US$ 450~500

• Place of origin:  

  China

quenching medium; heat insulating material; refractory materials. 七、Dust removal and purification system; water treatment equipment and technology; nitrogen making technology; gas separation and recycling technology. 八、Ventilating device; Exhibition Charges Brand Hall (minimum area of 36sqms): 450 USD/sqm raw space rent + 5 USD/sqm construction management fees Standard Booth: USD4500/bo

[Related Keywords : Die Casting, Foundry, Industrial Furnace, casting]

90kw 1-20KHZ MF Generator, Medium Frequency Induction Heating Machine (Water Cooling)

• Place of origin:  

  China

Medium frequency generators are widely used in various industrial applications for their high efficiency and ability to generate high-quality power. 90kw induction heating machine application: 1, Metal Melting: Used for melting of copper, aluminum, gold, silver, etc. of colored metals 2, Induction Forging: Used for induction forging of brass, stainless steel, and carbon steel 3, Quenching: Quen

[Related Keywords : MF Generator]

Chromite Sand 40-70 Mesh AFS40-45 for Ladle Nozzle Filling Compound

• Min. Order:  

  1 Metric Ton

• Price:  

  US$ 550

• Place of origin:  

  South Africa

• Supply Ability:  

  5000 tons per month

quenching properties, which do not reduce hot cracking but can affect temperature gradients and promote directional solidification without the need for cold iron. This characteristic is important for large thick walled steel castings. Chromite sand can promote sequential solidification and reduce porosity defects. (2) Chromite ore sand is inert and therefore does not react with other metal oxides

[Related Keywords : Chromite sand 40-70, Chromite sand 40-70 mesh, Chromite sand AFS 40-45]

Water miscible heat treatment fluid

Point °C 74 Pour Point °C -12.5 pH(20°C, 5%Sol'n) 9.80 Applications Cooling effect like mineral oil; Heat-treatment & continuous casting of structural steel, wrought tool steel, alloy wrought tool steel, cast iron; Forgings of medium carbon steel for direct quenching. Dilution ratio 8%(G.Col-E) : 92%(Water) ~ 18%(G.Col-E) : 82%(Water) Package Drum 200 L/T (216kgs)

[Related Keywords : fuild, oil, heat treatment, cutting]

Graphite Rotors Impellers

• Place of origin:  

  China

Graphite rotors, impellers and shafts for aluminium dehydrogenation and purification Feature: 1. Thermal stability: According to the quench acute thermal using conditions of graphite crucible, we will specially design the production procedure, so as to ensure the reliability of product quality. 2. Corrosion resistance: Even and fine basic design will delay the erosion of crucible. 3. Impact res

[Related Keywords : Graphite Rotors, Graphite Impellers]

Induction Heating Equipment/Forging Machine/Brazing Machine

• Place of origin:  

  China

• Price Condition:  

  FOB

make your usage more freely; 5. Induction heating equipment is with special cooling cycle system, make sure the machine work continuously; 6. Various models,including Medium frequency,high frequency, Ultrahigh frequency, double frequency and so on. Power from 18 to 500KVA are all available. Please contact us for more details of Induction heating equipment(Forging Machine/Brazing Machine).

[Related Keywords : Indution Heating Equipment, Heat Treatment, Soldering, Anneal]

PIN,Bucket PIN,Excavator PIN, Heavy Equipment PIN

• Place of origin:  

  China

Pins: Our advantage: • Real quenching process to ensure core hardness with at least HRC20 or up • Surface hardness with HRC56-60 •Medium frequency heat treatment instead of high-frequency to ensure the thickness of hardness more than 1.8mm • Longer wear life • Excellent surface plating, including hard Chrome plate can be chosen • Material:40CR or 42CRMO material can be chosen Our qual

[Related Keywords : pin, bucket pin]

High Frequency Generator(Induction Heating Machine)

• Place of origin:  

  China

• Supply Ability:  

  100 Sets per Month

heat treatment, welding, soldering,brazing,quenching, temper, forging, annealling,melting metal and many other heating fields. With its high quality and low price, induction heating machineis quite popular with our clients home and abroad. High Frequency Generator(Induction Heating Machine): Please contact us for more details of High Frequency Generator(Induction Heating Machine).

[Related Keywords : high frequency generator, induction heating, welding, brazing]

Grate for Grinding Mill

• Place of origin:  

  China

medium frequency electric induction furnace/electric arc furnace. 4.Casting Inspection: direct, reading spectrum instrument, metallographic analysis, ultrasonic inspection, magnetic particle inspection, mechanical properties inspection. 5.Heat treatment facilities: Special heating electric furnaces, special water pools etc special quenching equipments. 6.Surface treatment: shot blast cleaning. 7.

[Related Keywords : grid plate, rubber liner]

Camshaft

• Place of origin:  

  China

• Supply Ability:  

  1000000 pcs/year

Technological Process: Steel Cut-->CNC lathe-->Hobbing-->High-frequency quenching Size:φ75*110mm Material:42CrMo4+C CNC TURNING PARTS & SERVICES Our CNC turning department has a comprehensive array of capacity, from small bar feed machines; medium to large multi-axis lathes with driven tooling to large gear box lathes.We have many years of CNC Turning experience and we strive to deliver the best

[Related Keywords : CNC Milling Parts, Precision Machining Parts, CNC Lathe Parts, CNC Turning Parts]