Price:
USD 50
Place of origin:
China
Price Condition:
FOB qingdao/shanghai
rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers. THE FraMes Frames are also a feature of the TID
[Related Keywords : duct rodder, fiberglass duct rodder, FRP duct rodder, snake duct rodder]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
one set
Place of origin:
China
Price Condition:
FOB shanghai
Introduction Copper Rod Continuous Casting and Rolling line is used to produce diameter 8mm ETP copper rod or FRHC copper rod, it is equipped with different melting furnaces according to different raw material. 1. Main components reverberatory furnace or shaft melting furnace, rotary holding furnace, casting machine, roller shears, straightener, burr shaver, rolling mill with 12 stands, oil lu
[Related Keywords : Casting, Rolling, Copper Rod, Continuous]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Min. Order:
1000 Meter
Price:
US$ 0.9 ~ 3
Place of origin:
China
flexibility 7, Quick installation Operating indexes 1, Continuous operating temperature:-55°C-125°C 2.Shrink temperature: started at 70°C, full recovery at 110°C Up to standard: Approvals Meet UL, VW-1 Applications of Anti-Slip Heat Shrinking Sleeves Polyolefin material, excelllent applications for various fishing tackles, sport fittings, any equipments and commodities with hand device.
[Related Keywords : Polylefin Non Slip Tube, Anti Slip Patter Sleeve, Fishing Rod Protector, Antiskid Device]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
Korea
Continuous Wave) Supply voltage 12~32V V dc Current consumption 300 mA at 12V W/O Alarm Power on time 300 ms Detection time 200 ms Communication RS-485 Operating temperature -40~85 °C IP protection rate 69 K Vibration 15 G Housing material Polycarbonate Dimension 108 x110(H) x 34(D) mm Weight 390 720 g W/O Bracket with Bracket Display Unit Detection Zone 5 Zones Operating Temp. -30°C ~ +70°C C
[Related Keywords : radar sensor]
Business Type
Manufacturer
Location
Incheon, Korea
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
Korea
device Single : Single inject the set amount one time Continuous : Continuous injection 0.001cc~0.05cc : Set injection volume JUVGEN H HA filler : Composed of a cylinder and a dedicated rod ingredients : Hyaluronic Acid JUVGEN I Dual-Chamber Syringe : Comprised of herbs, internal tube, external tube, and extension tube Alternate injection of two types of substances into the dermal layer
[Related Keywords : mesotherapy device, aesthetic medical device, beauty device, medical device]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
continuous high-performance cutting without frequent replacements. Their robust construction ensures that they can withstand harsh industrial environments, providing a reliable solution for professionals who require consistent and accurate results. Applications: Cold cut saws are widely used in industries that require precise, high-quality cuts on metals. They are especially beneficial in metalw
[Related Keywords : Cold Cut Saw, YDS Tool, power tools wholesale]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
500 Unit
Price:
US$ 0.1 ~ 0.5
Place of origin:
China
continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes. The unipolar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperat
[Related Keywords : Magnetic Sensor, Contactless Switch, Position Control, Speed Measurement]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 5000
Place of origin:
China
Supply Ability:
100 sets per year
Continues Hot Forging Hot forging of embryo gear parts, Gears hot forging, axle shaft hot forging, connecting rod continues hot forging, Bearings precision forging 4. Heat distortion Pipes Heat distortion, pipe bending, stainless pipe Heat distortion, copper rod Heat distortion, steel billets heat distortion, steel pipe heat bending 5. Hot Rolling Heating Steel rod hot rolling, steel billet hot r
[Related Keywords : steel bar induction heating, bar heat treatment]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
continuously casting steel into long rectangular shapes, which are then cut into manageable lengths. We serve many steel rolling mills. The bar rolling mill rolls the steel billet into steel bars of different specifications, which are supplied to the construction industry for reinforcement in concrete structures. The wire rolling mill processes the steel billet into wire rods, and the plate rolli
[Related Keywords : Steel Billet]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
continuous filtration from -200 ℃ to up to 600 ℃; 4. Cleanability: Due to the surface filtration structure with excellent countercurrent cleaning effect, the cleaning is simple; 5. It has good permeability, high strength, no need to add supporting structures, absolutely no material detachment phenomenon, strong corrosion resistance, easy cleaning, and not easy to damage. Connection method: Th
[Related Keywords : Sintered Mesh]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
10 Box
Price:
US$ 20
Place of origin:
China
continuously develop new products, the high-strength foam-filled tube forlive work developed by TID Power, the Full insulation cantilever system for railway and other products have obtained relevant technology patents. The product technology level is internationally leading, and has been used by customers at domestic and abroad. TID POWER has its own independent laboratory, and we conducts compre
[Related Keywords : polymer insulator]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
5 Piece
Price:
US$ 15~20
Place of origin:
China
continuous casting crystallizers, which is conducive to accelerating the solidification of molten steel and reducing the surface defect rate of ingots. The electrochemical properties of graphite rods make them an important material for LF refining furnace electrodes. Its use helps to shorten the power-on time and reduce power consumption. In silicon smelting, graphite rod electrodes can increase
[Related Keywords : High density graphite rod, Carbon graphite rod, Graphite rod price, Isostatic graphite rod]
Business Type
Manufacturer
Location
河南, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
continuous working time ≥48 hours; ★Connecting end: multi-specification, can connect different diameter electrical port of the instrument; ★Operation setting: Pre-set 6 commonly used voltage measurement modes to meet the needs of conventional instrument testing; Chinese/English voice broadcast, the volume is adjustable; Flicker alarm for leakage detection; Times of leakage counts; Unique mu
[Related Keywords : Insulation Detector, medical Insulation tester, medical sealing machine, detal sealing machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
US$ 9.9~10
Place of origin:
China
Continuous Casting: Used in the production of metal rods, bars, and wires. Electrodes and Crucibles: Graphite molds are also used to create electrodes and crucibles for high-temperature applications. Jewelry Making: Popular in the jewelry industry for creating intricate designs with precious metals. Advantages:Precision: Graphite molds can be machined to very precise dimensions, making them ideal
[Related Keywords : Graphite Mold]
Business Type
Manufacturer
Location
山东, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
PVC Paper Cutting Machine is a mechanical equipment specifically designed for cutting PVC materials. It has a multi blade design that can simultaneously or continuously cut PVC materials, thereby improving work efficiency. PVC paper cutting machine is widely used in the processing of PVC materials. Whether it is PVC film, PVC sheet or other forms of PVC products, it can accurately cut according t
[Related Keywords : Cutting Machine, PVC]
Business Type
Supplier
Location
上海, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 999999
Place of origin:
China
continuous. Integrated double-valve control for precise clutch-brake coordination, enhancing safety and efficiency. 7.Versatile Design Options Optional accessories include air cushions, movable worktables, and quick die change systems to meet diverse production requirements. Specifications - Tonnage: 400–1200 tons. - Frame Type: Steel-plate welded, split closed structure - Frame Structure: H-t
[Related Keywords : Power Press, Stamping Press, Gantry Press, Mechanical Press]
Business Type
Manufacturer
Location
Selangor, Malaysia
Employees Total
501 - 1000
Annual Revenue
More than 100,000,000
Min. Order:
10 Piece
Price:
US$ 39~65
Place of origin:
China
Supply Ability:
10,000 pieces per Month
Used in extension rod connection, its function is to transmit impact energy from the rock-drill piston, as well as rotation torque, into the drill string with no losses. It must withstand and transmit up to 6300 blows per minute from the piston continually, with great endurance and dependability. (1)Size: R25,R28, R32, R38, T38, T45, T51 (2)Length: 140mm-235mm (3)Package: in pallet or in carton.
[Related Keywords : Crossover Coupling]
Business Type
Manufacturer
Location
Guizhou, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
continuous casting ladle lifting hydraulic system, etc. As a cooperative manufacturer of iron and steel smelters for many years, EOOE Hydraulic have processed and manufactured many kinds of ladle lifting cylinders : ladle rotary lifting hydraulic cylinder, ladle turret arm hydraulic cylinder, ladle lifting hydraulic cylinder, ladle turret lifting hydraulic cylinder, lifting hydraulic cylinder and
[Related Keywords : Custom Cylinders]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
5 Piece
Price:
US$ 1 ~ 100
Place of origin:
China
rod, which is then transformed into a 1064nm continuous laser through the energy level transition of the laser rod. The absorption of ultraviolet light in a krypton lamp by a laser rod will generate color centers, making the laser unable to function properly; In addition, the radiation of 1064nm light in the Krypton lamp consumes a portion of the particles in the upper level of the laser, reducin
[Related Keywords : Samarium Doped Glass Tube, Glass Flow Tubes, Laser Flow Tubes, Laser cavity filter]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
500 Bag
Price:
US$ 1
Place of origin:
China
Supply Ability:
120000rolls per Month
Continue this action during and upon completion. For best results, manufacturers recommend the completed application should be no less than 10mm in thickness. Please refer to the instructions for use on each bandage for a troubleshooting guide. Certificate: Exhibition: About us: Ansen medical is the manufacturer with 12 years experience specializing in orthopedic products, such as fiberglass ca
[Related Keywords : Fast Repair Wrap, Emergency Pipe Repair Tape, Pipe Repair Tape, Repair Tape]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Competitive rod continuous products from various rod continuous manufacturers and rod continuous suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
