Video
Min. Order:
20 Piece
Price:
US$ 25
Place of origin:
China
Supply Ability:
1000pcs per month
chida(at)eheater(dot)cn Silca Heater GD Sic Heating Element is a kind of non-metal high temperature electric heating element. It is made of selected super quality green SIC as main material, which is made into blank,silicided under high temperature and re-crystallized. Compared with metal electric heating element ,this kind of element is characterized by high-applied temperature, anti-oxidization
[Related Keywords : Silca Heater, Silca, sic Heater, GD sic heating element]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1
Price:
USD 1
Place of origin:
Germany
Price Condition:
FOB HK
Supply Ability:
5000 pcs per month
SiC Based Photodiode UV Photodiode Sensor SG01S-18 TO18 Type Broadband SiC based UV photodiode A = 0,06 mm2 1.General features: Properties of the SG01S–18 UV photodiode • Broadband UVA+UVB+UVC, PTB reported high chip stability • Active Area A = 0,06 mm 2 • TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin • 10mW/cm 2 peak radiation results a cur
[Related Keywords : UV Photodiode, uv sensor, UV Photodioded sensor, sensor]
Business Type
Supplier
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
50 Piece
Price:
US$ 21.8
Place of origin:
China
Supply Ability:
100000Pieces per Month
AlSiC featured a lightweight design with superior heat dissipation. With a density one-third of copper, AlSiC is ideal for heat dissipation baseplates. Integrating the heat sink and base plate reduces thermal resistance and cost. AlSiC’s structure combines the low thermal expansion of SiC with the thermal conductivity of Al, allowing stable heat transfer and dissipation. It is lightweight and c
[Related Keywords : thermal pad, Electronic Substrat, Ceramic Materia, Electronic Packaging]
Business Type
Manufacturer
Location
Henan, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Video
Min. Order:
5 Piece
Price:
US$ 40~50
Place of origin:
China
s rapid cooling and heating cycles (the limit of metal heaters is ≤50℃/s) 2. High temperature strength: the bending strength remains at 15MPa at 1600℃ (molybdenum alloy only has 3MPa at the same temperature) 3. Oxidation resistance: after SiC coating treatment, the service life is extended to 5000 hours at 10⁻² Pa oxygen partial pressure Product Details Application Industry Related Produ
[Related Keywords : Graphite heating element, Custom graphite heater, Furnace graphite heater, Carbon graphite heater]
Business Type
Manufacturer
Location
河南, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
excellent ballistic property 3. Endure more high temperature and suit for more applications The contrast of Armour Ceramic Materials Performance S-SIC(WNV2) 99% AL2O3 Density（g/m3） 3.10~3.14 3.80 Flexural Strength(4 point bending) (mpa) 400 300 Hardness Vickers (kg/mm2) 2600 1500 Youngs Modulus 410 310 Fracture Toughness (mpa.m1/2) 4.0 2.5 Maximum Working Temperature (℃) 1600 1400
[Related Keywords : SIC, silicon carbide, ceramic, sic ceramic]
Business Type
Manufacturer
Location
ANHUI, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Silicon Carbide Abrasive Description: Silicon carbide (SiC) abrasive is a highly effective and versatile abrasive material known for its hardness and sharpness. It is made by heating silica sand and carbon in an electric furnace at very high temperatures, a process known as the Acheson process. The result is a crystalline structure of silicon carbide, which is extremely hard—ranking 9 to 9.5 on
[Related Keywords : Black Silicon Carbide]
Business Type
Supplier
Location
Jiangsu Provinc, Hong Kong
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Kilogram
Price:
US$ 37
Place of origin:
China
Supply Ability:
10000
SiC and other materials to form composite materials, making various high-temperature resistant and functional components, such as high-temperature crucibles, engine components, etc. It is also one of the best materials for producing armor protection materials. 4. Cathode coating materials for aluminum electrolytic cells. Due to the good wettability between TiB2 and molten aluminum, using TiB2 as
[Related Keywords : TIB2 Titanium diboride, factory wholesale price, tib2 powder, customized Titanium Borid]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
15 Piece
Price:
US$ 445
Place of origin:
China
SIC20 mechanical seal pump BKM(FX)103055 rotary vacuum pump P-1761-1 LPCV LVDT TD-1300S 0-300mm pressure hose SMS-20-1524mm-C electric transfer oil pump 80AY50X9 solenoid valve S333CH98V4BC5 sealing ring HB4-56J8-186 mechanical seal in pump 104-45 screw pump working principle ACF090N4 Skeleton oil seal TCM589332-00G pressure hose SMS-10/N1/4-1219mm-B electric centrifugal pump head 65-250B impelle
[Related Keywords : Ring]
Business Type
Supplier
Location
Sichuan, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
10 Kilogram
Price:
US$ 120
Place of origin:
China
SiCβ-SiC 99%Thermal spray coating, Sputtering materialsSilicon nitride Si3N4Si3N4 99%Thermal spray coating, Sputtering materialsBoron carbide B4CB4C 99% Thermal spray coating, Sputtering materialsBoron nitride BBNThermal spray coating, Sputtering materialsOthersAgglomerated & SinteredSpherical/Close spherical CrownRe`s Dentistry Zirconia ZrO2 Introduction: The use of professional hydrothermal sy
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Supply Ability:
1500sets
SiC) depending on pumped media. Motor cable SUBCAB ? specially developed for submersible use Offers flexible cooling systems, e.g. closed loop cooling system, media cooled or external cooling. Founded in Sweden more than 100 years ago, Flygt is a well-known water pump brand, sewage treatment solution provider and water technology company specializing in water transport, treatment, monitoring, co
[Related Keywords : Flygt Sewage pump, submersible pump, wastewater pump]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
10 Piece
Price:
US$ 50
Place of origin:
China
SiC) Heating Elements specific gravity 2.6~2.8g/cm³ bend strength >300kg hardness >9MOH’S tensile strength >150kg/cm³ porosity rate <30% radiance 0.85 Surface Load Recommended Furnace temperature 1100 1200 1300 1350 1400 1450 Surface load of hot zone (w/cm²) <17 <13 <9 <7 <5 <4 Please measure the size of OD / D / CZ / HZ / A in mm according to the above figure. I will quote you according to
[Related Keywords : SiC Heating Elements]
Business Type
Supplier
Location
河南, China
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Box
Price:
US$ 1 ~ 30
Place of origin:
China
Supply Ability:
3000pcs/month
SiC-whisker reinforced. Alumina reinforced with SiC whiskers is the toughest and most resistant to thermal shock of the oxide-based ceramics due to the extremely high tensile strength of the SiC whiskers. It offers the additional benefit of being able to be run without coolant, thus making dry machining a common application while also being able to offer an increase in machining rates up to 800%.
[Related Keywords : Ceramic, cutting tools]
Business Type
Manufacturer
Location
Henan, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 120000
Place of origin:
China
s patented multi-specification wafer transfer solution, the equipment can not only be compatible with various sizes such as 4/6/8/12, enabling rapid switching of conventional silicon-based wafers, but also can accurately identify non-silicon-based material wafers through continuous deep learning. Honghu equipment has been widely used in the field of silicon-based integrated circuit manufacturing
[Related Keywords : 320 pieces/hour]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Min. Order:
1
Place of origin:
United States
Price Condition:
EXW
Supply Ability:
200 units per year
SiC and other valuable compound material wafers .Chamber Design: Allwin21PowerSum Function: Save valuable compound material wafers. RTP Main Customers: Link Free Fast Quote: Link For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These R
[Related Keywords : AG Associates, Atmospheric RTP, Rapid Thermal Oxidation, Rapid Thermal Nitride]
Business Type
Manufacturer
Location
California, United States
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Video
Min. Order:
1 Ton
Price:
US$ 850 ~ 1300
Place of origin:
China
Supply Ability:
5000T PER MONTH
SiC F.C. Fe2O3 silicon carbide 98.5 98.5%min 0.2%max 0.6max silicon carbide 98 98%min 0.3%max 0.8max silicon carbide 95 95%min 0.6%max 1.25max silicon carbide 90 90%min 1.0%max 1.3max silicon carbide 88 88%min 2.0%max 1.2max silicon carbide 85 85%min 2.5%max 3.5max silicon carbide 80 80%min 5%max 3.5max silicon carbide 75 75%min 12%max 3.5max silicon carbide 65 65%min 15%max 3.5max Application 1.
[Related Keywords : silicon carbide, silicon carbide 88, silicon carbide 90, Black Silicon Carbide]
Business Type
Manufacturer
Location
Henan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
Korea
SiC, BC, TiB2, Si N, TiN, AlN, SiAlO2), secondary battery (LiCoO2, LiMn2O), blue phosphor for PDP, dielectric for MLCC(BaTiO), functional nano ceramic materials(Piezoelectric Material PZT), hydrogen storage(TiFeH, TiH) and intermetallic compounds. SHS is especially applied to functional material industry and nano particles with high purity. Ilshin Autolcave’s SHS system can perform accurate
[Related Keywords : Propagating Reactor, Reactor]
Business Type
Manufacturer
Location
Daejeon, Korea
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
500EA
Place of origin:
Korea
Price Condition:
FOB
About the Product Mom~ my legs hurt so bad! Protect your child’s knees from the force of gravity pulling their dangling legs KneeguardKids provides comfort and stability and removes pain, discomfort, and numbness, as it keeps the blood circulation flowing freely within your child’s legs by relieving unnecessary pressure from the seat belt. Provides secure connection with ISOFIX(LAT
[Related Keywords : CAR SEAT, Car Seat Footrest]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
1 - 5
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
Korea
Price Condition:
FOB Korean port
S ,M, H grit ; #60~220 grain A/O.SiC ============================= PUSWA(Slim Type Wheel) To be our creative product and based on polyurethane resin We produce two type, Soft type to have good elasticity like rubber and hard type. application ; for grinding and processing -welding part. -corner of sink -mold for working groove -stainless -steel specification outer diameter ;100mm~405mm thick
[Related Keywords : PU Grinding Wheel, CRT, grinding welding part, grinding shank]
Business Type
Supplier
Location
Busan, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Min. Order:
5 Piece
Price:
US$ 1
Place of origin:
China
SiC Substrate Homray Material Technology provie 4 inch 4H-N SiC substrate. We have dummy grade and producton grade and Ultra low Mpd grade SiC wafer in stock. Because of its outstanding material properties SiC-based electronics and devices can work in very hostile environment, where operation of conventional silicon-based electronics is not possible anymore. SiC （Silicon carbide）'s ability t
[Related Keywords : SiC Substrate supplier, SiC wafer manufacturer]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
Price Condition:
FOB
s mainly used as packing for various pumps' static & dynamic sealing. It has the characteristics as extensive adaptability, high-temperature resistance, high-pressure resistance, corrosion resistance, self-lubrication, low coefficient of friction, etc. Main technical parameters: Temperature of use: -200°C -800°C Pressure of use: 25 MPa Medium of use: Strong acid, strong base, stea
[Related Keywords : Mechanical Carbon]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Competitive s sic products from various s sic manufacturers and s sic suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
