Place of origin:
China
Supply Ability:
50 Sets per Month
PLC control pressure safety valve test bench for flange safe valve and threaded valve test Pneumatic safety valve test bench product introduce: The safety valve test bench is a new type of pressure test device developed by our company, which is used to adjust and test the setting pressure of the safety valve. Option 1: PLC control Option 2: Computer control (support to print the test report and p
[Related Keywords : safety valve test bench, PLC control pressure safe]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1 Unit
Price:
US$ 15300 ~ 21000
Place of origin:
China
Supply Ability:
20 units per month
WBD-400Valve Testing Machine Production Briefing I. Application & Characteristics WBD-400Valve Testing Machine, a special one for the testing of the pressure of all kinds of valves, is applicable for the testing of valves before they leave the manufacturers, for the purpose of testing before the installation, the strength after the fixing, and the sealing capacity detection. The product is co
[Related Keywords : valve pressure test, pipe fitting test]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 12000
Place of origin:
China
Supply Ability:
20 sets per month
Technical performance and feature 1. YFT-B vertical series hydraulic valve test bench is suitable for the shell and seal test of the valves below DN-300, it has two types of plane blind plates: plastic seal plates for non-flange valve test and O rings seal plates for flange valve test.2. The work panel has claws and the upward side has impact cylinder.3. the top beam can be turned over 90 degrees
[Related Keywords : valve test machine, vertical test mach, test mach]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
30set per month
Flipped Double Holding Pressure Type Valve Test Bench Flipped Double Hold Pressure Valve Test Bench Valve Pressure Test Bench Suitable for gate valves, globe valves, ball valves, control valves, check valves and other straight- flange connection valve seal and valve body strength performance test and the activated pressure setting of relief valve, et Clamping pressure valve type is hold, hold pre
[Related Keywords : Valve Test Bench, Valve Pressure Test Bench, Grinding Machine, Vertical Valve Test Bench]
Business Type
Supplier
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Pressure relief valves are designed to automatically open and release excess pressure from a system to prevent damage or injury. To ensure that pressure relief valves are functioning correctly, they must be tested regularly using specialized test equipment. Some examples of pressure relief valve test equipment include: Pressure test benches: These are used to apply pressure to a pressure relief v
[Related Keywords : pressure relief valve tes]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Place of origin:
China
Fire Sprinkler Valve Testing Machine introduction: The equipment adopts advanced pneumatic fixture.Press start, quick seal, automatic air intake, self-sinking into the tank, automatic pressure holding, automatic exhaust. The equipment has a high degree of automation and high efficiency.
[Related Keywords : Fire Sprinkler Valve]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
valves and other valve seals), pumps. 6.Q: How about the installation and training? A: We can supply the installation and training. There are two options. The first option: We could appoint our engineer to your company to debug and repair, as for the cost of this trip such as ticket, visa, accommodation and labor cost shall be on your side. The second option: On-line service will be provided. If
[Related Keywords : Wine Fermentation Tank, fermentation tank, ferment tank machine, brewing fermenting tank]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Video
Min. Order:
20 Piece
Price:
US$ 79
Place of origin:
China
Supply Ability:
5000 pcs per month
Valve MHDV20 FEATURES Built-in, full flow relief valves Parallel and series circuits in one bank Manual, hydraulic, electric or pneumatic operation Sectional construction for maximum flexibility Spool changeover capability for right-hand or left-hand valve assemblies Low internal pressure drop Work sections are 100% pre-assembled and tested prior to delivery Stackable (sectional) design allows
[Related Keywords : Control Valve, VA20 Valve, VA35 Valve, Hydraulic Multiple Valve]
Business Type
Supplier
Location
Anhui, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
10 Piece
Price:
US$ 3
Place of origin:
China
test apparent densityChemical:can be used as anti-corrosion materials, can manufacture a variety of anti-corrosion parts, such as pipes, valves, pumps and fittings joints. Chemical equipment, can be produced reactor, distillation column and anti-corrosion equipment lining and coating. Mechanical:can be used as self-lubricating bearings, piston rings, oil seals and seals. Self-lubrication can redu
[Related Keywords : PTFE]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
valve, Pressure gauge, Breath valve, Temperature gauge,Top manhole, Washing ball, Butterfly valves, CIP Arm, Hop port, Discharge arm and so on.Introduction to Beer Equipment: Medium capacity brewery equipment is widely used in brewery factory, restaurant and so on. It can brew pale lager, amber lager, dark lager, ale and etc at proper temperature with different raw material. According to the clie
[Related Keywords : beer equipment 1000L, brewing equipment beer, 1000l beer equipment, jinan beer equipment]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Video
Min. Order:
1000 Piece
Price:
US$ 0.4 ~ 3.5
Place of origin:
China
valves. 4. Shrinkage ratio: 3:1 Operating indicators First shrink Temp.:70 ℃ Final shrink Temp.:125℃ Working Temp.:-45℃~125℃ Up to standard: Approvals Meet RoHs compliant, Weather resistance Technical parameters Product Property Test method Test Date Tensile strength ASTM D 2671 ＞12 MPa Elongation at break ASTM D 638 ＞ 400％ Density ASTM D 792 1.05g/cm3 Elongation at break after
[Related Keywords : Heat Shrink End Cap, Wire Protective End Cap, Waterproof Wire End Cap, Insulation Wire End Cap]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
Korea
It is a semi-permanent water hammer arrestor made up of steel with an EPDM air bag inside to prevent the leakage of air. Plus, it absorbs sudden pressure when the shut-off valve is closed. It is usually installed on top of the pump and/or the end of the fire pipe in parking space. Its volume appropriateness and reliability have been proved through 200,000 cycle tests.
[Related Keywords : shock control]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Available in a wide variety of configurations and sizes, with end connection options of Male/Female NPT threads and material options of stainless steel, carbon steel and brass. Designed and tested for pressure rating up to 10,000psi. NACE MR0175 compliant. Supplied as fully assembled or as individual valve sets. Size:1/4"~1" Pressure Range: 6000~10000PSI Materials: 316, 304, 316L, 304L, A105, bra
[Related Keywords : Needle Valves, Gauge Valves]
Business Type
Supplier
Location
Anhui, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1500 Piece
Price:
US$ 0.18
Place of origin:
Korea
Supply Ability:
50000 pieces per month
If you want OEM printing, we will quote our price again, and delivery is 21 days. Size & Packing quantity per box Ice pack size Semi-finished ice pack (check-valve type) Finished ice pack (gel pack type) / weight per piece 12 x 18 cm 2000 pcs 100 pcs / 170 gram 15 x 20 cm 1500 pcs 40 pcs / 340 gram 16 x 23 cm 1500 pcs 32 pcs / 520 gram 28 pcs / 600 gram 22 x 27 cm 900 pcs 32 pcs / 800 gram
[Related Keywords : eco-friendly gel ice pack, ecogel ice pack, better than water icepack]
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Video
Min. Order:
50000 Piece
Price:
US$ 4
Place of origin:
China
Supply Ability:
60,000 Set/ Sets per Month
valves (e.g., petal valves, flap valves) for instruments of different diameters, which are required to maintain airtightness in the range of 5-12 mm instruments. Secondary seal (static seal): Precise fit of the cannula to the puncture core (gap ≤ 0.05 mm) to prevent gas leakage from the instrument channel. Redundant sealing design: Some high-end Trocars are equipped with secondary sealing caps
[Related Keywords : Disposable trocar, Laparoscopic trocar, Surgical trocar, Hasson trocar]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Unit
Price:
US$ 19655 ~ 25955
Place of origin:
Singapore
valves and coolers, and control must be performed for them. But in internal EGR, these functions can be performed by controlling the lift of the intake and exhaust valve.Performance911hp ( 670kW ) at 1938rpm in the L operating mode Type Approval testing in the presence of the relevant Classification Societies was preceded, which involved 110% of maximum continuous rating (MCR). 6AYM-WGT was possi
[Related Keywords : Yanmar Diesel Boat Engine, Bus Engine, Truck Engine, Outboard Engine]
Business Type
Supplier
Location
Singapore, Singapore
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
10 Box
Price:
US$ 28000
Place of origin:
China
Supply Ability:
10
Hydraulic Valve Brand EVERUNMachinery Test Report Engine imported Engine rated power20.9KW Engine rated speed2800r/minBucket capacity0.3m3Operating weight1350kgTyre26*12-16.5Max driving speed8-16km/h working pressure 21mpaoil flow22L/min Product Name small forklift mini telehandler telescopic loader machine Packaging and deliverySelling Units:Single itemSingle package size:335X158X195 cm
[Related Keywords : forklift]
Business Type
Supplier
Location
California, United States
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
50 Piece
Price:
US$ 50
Place of origin:
China
Supply Ability:
3000 Set/ Sets per Month
valve body and causing induction failure to discharge water. Quality: Product Conduct routine performance and safety tests on national health equipment and household appliances. Meets the requirements of CJ/T194-2004 standard Power saving: The machine is powered by four No. 5 alkaline batteries Easy maintenance: Equipped with a water flow regulating valve and filter screen, it can be easily maint
[Related Keywords : Temperature faucet, Thermostatic sensing tap, Hotel bathroom sensor tap, brass sensing faucet]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Unit
Price:
US$ 27900 ~ 30900
Place of origin:
Malaysia
valves and coolers, and control must be performed for them. But in internal EGR, these functions can be performed by controlling the lift of the intake and exhaust valve.Performance911hp ( 670kW ) at 1938rpm in the L operating mode Type Approval testing in the presence of the relevant Classification Societies was preceded, which involved 110% of maximum continuous rating (MCR). 6AYM-WGT was possi
[Related Keywords : Yanmar Diesel Engine, Inboard Engine, Outboard Engine, Volvo Penta Engine]
Business Type
Supplier
Location
Malaysia, Malaysia
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
10 Piece
Price:
US$ 10 ~ 9999
Place of origin:
China
The Sun Hydraulics supplier portfolio includes cartridge valves for pressure, flow, logic, directional, and load controls, all available in up to 5 capacities. Sun’s standard manifolds are offered in an almost limitless variety–including direct mount, line mount, sandwiches, subplates, and motor mounts–and come in two basic materials: T6061 aluminum and ductile iron. Product Introduction M
[Related Keywords : Sun Hydraulics supplie, Sun's standard manifolds, Hydraulic Component supp]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Competitive test valve products from various test valve manufacturers and test valve suppliers are listed above, please select quality and cheap items for you.
Besides, we also provide you with related products such as 3way valve, instrument valve and brass valve for your choice.
 |
Recommended Content
