Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
Supply Ability:
5000TONS
Thick Wall Seamless Steel Pipe Seamless steel pipe is hollow section, a large number of used for conveying fluid pipe, such as oil, natural gas, coal gas, water and some solid materials, such as pipelines. Compared to the steel pipe and round steel solid steel bending torsional strength phase at the same time, the weight is lighter, is a kind of economic cross section steel, widely used in the ma
[Related Keywords : Seamless steel pipe]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Ton
Price:
US$ 650
Place of origin:
China
Supply Ability:
1000 Ton/month
high quality seamless steel pipe tube hollow bar description the production of our seamless steel pipes is tightly regulated and all of the pipes we produced have been fully tested to international standards to ensure we only supply the highest products. Stock material: 1020. 1045. 4140. 4145. st37. st52. q345b. 16mn. a106. a315. a106. 15crmo. 35crmo. 42crmo. 20g Outside: 8-650mm Thickness: 2-300
[Related Keywords : Seamless steel pipe, steel pipe, steel pipe price]
Business Type
Supplier
Location
Tianjin, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
500 Kilogram
Price:
US$ 3.8 ~ 15
Place of origin:
China
Supply Ability:
500tons /month
As one of leading stainless steel pipe suppliers fittings flanges supplier manufacturers in china,304 304l stainless steel pipe,316l stainless steel pipe suppliers,310s stainless steel tubing,904l stainless steel pipe,duplex stainless steel pipe with amazing price Kcm Special Steel Co., Ltd we are Manufacturer of Stainless Steel Pipe and Tube and Fittings ( elbow, tee, Reducer, Cap, Cross, Flange
[Related Keywords : stainless steel pipe, stainless steel, stainless, stainless steel elbow]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Min. Order:
200 Piece
Price:
US$ 5
Place of origin:
China
insulation capabilities make them a good choice as economical hose and cable protection where molten splash is not a factor. For high temperature resistant electrical cable, wire covering, and high temperature pipe wrapping. E/C Glass Fiber Sleeving Temp.: 550 ℃ Wall thickness: 1.0mm~3.0mm Inner Diameter: 10mm~100mm Packing: 25m or 30m/roll In CTN or plastic woven bag of 20kg net each
[Related Keywords : fiberglass]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Unit
Price:
US$ 60
Place of origin:
China
Product Description DTH drill rods (also called as drill tubes or drill pipes) are the mechanism to transmit impact force and rotation torque to DTH hammer and DTH bit, as well as offer pass for the air flow. Sunmoy supplies a full size of friction welded DTH drill rods from 76mm to 140mm with different wall thickness. In DTH drilling, the percussive DTH hammer is located behind the drill bit, in
[Related Keywords : DTH drill rod, Sunmoy]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Video
Min. Order:
1000 Piece
Price:
US$ 0.08 ~ 0.4
Place of origin:
China
pipe end cap provides economical and sturdy protection for your product line. Our pipe end caps can be produced in various lengths, wall thicknesses and colors. Product Feature *Material: Soft PVC * Flexible and durable will not crack, tear or break *Dust proof, fire resistant, UV resistant, environmentally friendly, halogen-free * Can be used as thread protection caps, end caps, pipe caps, pipe
[Related Keywords : Soft PVC End Caps, Flexible PVC End Caps, Dip PVC End Caps, Wire PVC End Caps]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Tonne
Price:
US$ 500 ~ 650
Place of origin:
China
Product nameWelded Steel PipeMaterial10#, 20#, 45#, 16Mn, A53(A,B), Q235, Q345, Q195, Q215, St37, St42, St37-2, St35.4, St52.4, ST35Wall thickness1MM ~ 12MMOuter Diameter20MM ~ 508MMPhysical PropertyAPI 5L, ASTM A53-2007, ASTM A671-2006, ASTM A252-1998, ASTM A450-1996, ASME B36.10M-2004, ASTM A523-1996, BS 1387, BS EN10296, BS6323, BS 6363, BS EN10219, GB/T 3091-2001, GB/T 13793-1992, GB/T9711Gra
[Related Keywords : Welding Steel Pipe]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
10 Square Meter
Price:
US$ 84 ~ 115
Place of origin:
China
Supply Ability:
10000
1) Panel design: The aluminum plate adopts 2.5mm thick aluminum veneer or 3mm thick aluminum veneer, and the surface is powder-coated. Base material brand: 3003-H24. The specification of aluminum angle code is L20*2mm, length 40mm, and spacing 300mm. 2) Keel design: The vertical keel adopts 100*50*4 hot-dip galvanized square steel pipe, and the horizontal keel adopts L40*4 hot-dip galvanized angl
[Related Keywords : Metal curtain wall]
Business Type
Manufacturer
Location
天津, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
pipes should be treated with insulation twice; (3) The bonding points and all gaps of the insulation materials should be tightly sealed with glue. The conventional dimensions of rubber-plastic pipes usually include two parameters: outer diameter and wall thickness. The outer diameter generally ranges from a few millimeters to tens of millimeters, while the wall thickness depends on the purpose an
[Related Keywords : Insulation Pipe]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Video
Min. Order:
19 Metric Ton
Price:
US$ 5000
Place of origin:
China
wall thickness of the raw material meet the product requirements. When unloading the product, the pipe needs to be cut to the length required by the drawing. Cut and punch holes. Weld the horizontal and vertical tubes in all directions. Perform sandblasting to increase the adhesion of the powder. Phosphating or powder coating to increase the rust and corrosion resistance of steel palisade fencing
[Related Keywords : Palisade Fencing, Security Fence]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Pipe sizes available: Tube OD: 25.4 / 31.8 / 38.1 / 50.8 / 63.5 and 76.0 mm Pipe OD: 26.7 / 33.4 / 42.2 / 48.3 / 60.3 / 73.0 / 88.9 / 101.6 / 114.3 / 141.3 / 168.3 and 219.1 mm Tube/Pipe Wall Thickness: Minimum 2.13mm for solid fin Minimum 1.9mm for serrated fin Minimum thickness is also dependant on the fin thickness and tube/pipe OD. Fin HeightRange: Solid Fin: 6.3mm - 31.8mm Serrated Fin: 12.7
[Related Keywords : finned tube, extruded finned tube, Titanium pipe, titanium tube]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
pipes with narrow strip steel. (2) Under the same pressure conditions, the spiral welds are subjected to a smaller stress than the straight seams, which is 75% to 90% of the straight seam welded pipes, and can therefore withstand greater pressures. compared with the straight welded pipe with the same outer diameter, under the same pressure, the wall thickness can be reduced by 10% to 25%. (3) Acc
[Related Keywords : SSAW Steel Pipe]
Business Type
Manufacturer
Location
湖南, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Model: GC-6 Pipe Capacity:2 ”-6” (￠50 mm - ￠150 mm) Max wall thickness:6 mm Output RPM: 29r/min Motor:220V/380V Universal Motor 50/60 HZ Power:550W Net Weight:68.5 KGS Packing Size:410*670*680(mm)
[Related Keywords : pipe groover, grooving machine, electirc pipe groover, hydraulic roll groover]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Multi-function Pipe Bending Machine This machine is used to bend pipes, both for round pipe and square pipe. We can supply moulds in your needs, to bend various pipes with different angle. MWG-76 Round Mould: 16,19,22,25,32,38,51,63,76 mm Square Mould: 16,19,22,25,30,38,40,50 mm Wall Thickness : 0.5-2mm Power: 380V/50HZ/1.5KW Gross Weight: 290 Kg Packing Size: 920*580*1060(mm)
[Related Keywords : pipe bender, bending machine]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Meter
Price:
US$ 50
Place of origin:
China
weight and ease of installation can reduce installation costs by as much as 50% over metal piping system 4.Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipe 5.Longevity: more than 50 years under proper use 6.Recycled and Environment-friendly Application: delivery of natural gas, liquefied petroleum gas (LPG), and artificial coal gas.
[Related Keywords : Polyethylene Pipe, High Density Polyethylene]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Pipe Product Parameter: Description Name EN10219 Cold Formed Welded Structural Tubes S355J0 S355JR S355J2 Material S355J0,S355JR,S355J2 Standard EN10219 Certificate ISO9001:2015,CE,FPC Section Shape RHS,SHS,CHS Outer Diameter 15mm-1500mm Wall Thickness SCH10,SCH20,SCH30,STD,SCH40,SCH60,SCH80,SCH100,SCH120,SCH160,XS,XXS Length 1-12m,or customized according to customer requirements Surface Treatmen
[Related Keywords : Steel Plate, Steel pipe, Steel Beam]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
20 Ton
Price:
US$ 1000
Place of origin:
China
Supply Ability:
50000TONGPERYEAR
pipe wall. high strength and density,high smoothness internal and external surface, no casting defect, easy installation, easy maintain, long using life, environmental protecting,fireproofing and no noise. DN External diameter DE(mm) Wall thickness(mm) Unit weight Length Nominal value Tolerance Nominal value Minimum value kg/pc (mm) 40 48 +2 -1 3.0 2.5 12.70 3000+/-20 50 58 3.5 3.0 13.00
[Related Keywords : DIN EN877 PIPE, SML PIPES, EN877 FITTINGS, CAST IRON PIPE]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
Above 1000
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
10 Piece
Price:
US$ 10 ~ 100
Place of origin:
China
thickness of the concrete, the hardness of these segments wears out more or less quickly, and once the segment is worn out, the bit can no longer be used. In this case, replacing the segment is a real and inexpensive option.Normally, with sufficient wall thickness and effective length, perfect concentricity and complete joint threads, all drill pipes can be reused. Segments are welded when replac
[Related Keywords : Diamond Segment]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
5 Ton
Price:
US$ 1000 ~ 3000
Place of origin:
China
Pipe Material Q195 Standard GB, JIS Thickness 0.12mm -3.0mm Width 15-870mm Surface zinc coating Technique Cold Rolled with galvanized Packing In coils MOQ 5 MT Certification ISO9001:2008,SGS,BV, Application Widely used for roofs, outer walls, ovens, explosive-proof steel, electrically controlled cabinets,industrial freezers in the residential & industrial buildings Our carbon galvanized steel pip
[Related Keywords : galvanized steel pipe, steel pipe, steel pipe manufacturer]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Insulation Pipe is a flexible thermal insulation. It is of very lower thermal conductivity and high water vapor diffusion resistance due to its closed cell structure and used to retard heat gain and prevent condensation on cold water plumbing and air-conditioning lines. The wall thickness include1/4", 3/8", 1/2", 3/4"
[Related Keywords : insulation pipe, insulation tape, rubber pipe, PVC pipe]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Competitive thick wall pipe products from various thick wall pipe manufacturers and thick wall pipe suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
