Min. Order:
1 Piece
Price:
US$ 20
Place of origin:
China
Supply Ability:
100000
Type A-KC/Type C-KC/Type X-KC series Reail-silm Thin-section bearings Details Product Features To support various load scenarios,Reail-SlIM Thin section ball bearings are available in three basic types: radial contact (type C), angular contact (type A), and fourpoint contact (type X) and in a variety of sizes ,or series (e.g., KA, KB, KC, etc.). Reail-SlIM Thin section ball bearings are availabl
[Related Keywords : thin bearing KA035CPO, kaydon KA042CPO, robot beafring KA047CPO]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
500sets/month
Bearings for CT scanner The structure of four-point contact ball is adopted with the following major technical parameters: 1 Overall dimension: Φ680mmXΦ865mmX55mm; 2 Bearing rotation speed:60rpm (now is 180~300 rpm); 3 Service life: 200X109revolutions; 4 Rotation precision:P5 (high precision); 5 Noise level:less than 70dB; 6 Friction torque:4N·m; 7 Sealing performance: oil leak-free.
[Related Keywords : Thin section, Thin wall, precision bearing, CT Bearing]
Business Type
Supplier
Location
Henan, China
Employees Total
1 - 5
Annual Revenue
Less than USD 100,000
Video
Min. Order:
5 Set
Price:
US$ 38
Place of origin:
China
Supply Ability:
3000/month
Our Thin Section Bearing product contains seven series of open types and five series of sealed types, with bore diameter ranging from 1 inch to 40 inch and cross section ranging from 0.1875 × 0.1875 inch to 1.000 × 1.000 inch. Three kinds of Open Thin Section Bearings are available: Radial contact (C Type), Angular contact (A Type) and Four-point contact (X Type). Two kinds of Sealed Thin Secti
[Related Keywords : Open, slim, thin section bearing]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
10 Set
Price:
US$ 100
Place of origin:
China
Supply Ability:
100000/month
thin section ball bearing: We offer robot arm thin section bearing,thin section bearing cages/retainers with standard sizes or customer designed sizes. These ultra thin section ball bearing cages are available in three types bearings: Radial, angular and four-point contact with or without seals. These thin section ball bearing are used in the aerospace industry, robots, textile machines, instrume
[Related Keywords : thin section ball bearing, thin section bearing, thin bearing, bearing]
Business Type
Supplier
Location
Shandong, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1000
Price:
USD 0.06
Place of origin:
China
Price Condition:
FOB Ningbo
Supply Ability:
500000pcs/per Month
Skate Bearings 696 specifications: 1) Shield / closure: Open bearing, Z, ZZ, RS, 2RS 2) Snap ring: N, NR 3) Tolerance codes: ABEC-1, ABEC-3, ABEC-5, ABEC-7 4) Vibration level codes: V4, V3, V2, V1 5) Internal clearance codes: C2, C3, C4, C5 6) Material: Carbon steel and Bearing steel 7) Retainer: PTFE, nylon, PEEK or stainless steel 8) Bore size: 1 - 500mm 9) Model: 672-6709, 682-6820, 6
[Related Keywords : 696 bearing, carbon bearing 696zz]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
5
Place of origin:
China
Price Condition:
FOB
Supply Ability:
500 Sets /Month
Where there is no any severe pollution,the opened bearings should be preferred;where the cleaning and well lubrication are required,the sealed bearings should be perferred. Quality control standard Nowdays,the product tracking is becoming more and more important.To meet this requirement,each series of bearings is numbered,for customers to confirm easily and quickly the company's products at
[Related Keywords : Precision Thin Section Bearing, Precision Open Type Bearing, Precision Deep Groove Ball]
Business Type
Manufacturer
Location
Henan, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
5 Set
Price:
US$ 25
Place of origin:
China
Supply Ability:
30000 per month
We specialized in producing Non-standard thin section bearings which include seven Open-series and five Sealed-series with bore diameters from 1 inch to 40 inches, and cross-section ranges from 0.1875*0.1875 inches to 1.000*1.000 inches by size, The top there type of our main products include: Deep groove ball bearings, Angular contact type bearings, Four-point contact ball bearings for which sta
[Related Keywords : thin section, thin wall, slim bearing, four point contact]
Business Type
Manufacturer
Location
Henan, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Video
Place of origin:
Korea
sections of the adventure facility, a circular hook designed with a narrow gap allows it to pass through a thin rail. Vertical Trek users can focus on using adventure facilities in a safer environment. Cable knot and Mac system assemble Installation and How to Use 1. To support the cable, position the shackle and ferrule rubber at a fixed point (cable, sling, pole, etc.), and make all the bearing
[Related Keywords : vertical trek]
Business Type
Manufacturer
Location
Gyeongsangbuk-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
Turkey
section.The nominal diameter of the steel bar is 8-50 mm, and the recommended diameter is8, 12, 16, 20, 25, 32 and 40 mm.Ribbed bars mainly bear tensile stress in concrete.The ribbed steel bar can bear the action of external force better because of the effect of ribbed and concrete.Ribbed bars are widely used in various building structures, especially large, heavy, light thin-walled and tall buil
[Related Keywords : Reinforcement steel rebar, Turkish Iron Rods, Deformed Steel Bar, Building Material]
Business Type
Supplier
Location
Ovaakca Bursa, Turkey
Employees Total
1 - 5
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
US$ 3
Place of origin:
China
Supply Ability:
10000pcs
Bearing Specifications : Needle roller bearings use long, thin cylindrical rollers to support radial loads. These needle rollers have a length that istypically three to four times its diameter. Needle roller bearings have a thinner cross section than other roller bearings and are ideal for limited-space applications that require carrying heavy loads. Drawn cup needle roller bearings have a deeply
[Related Keywords : needle bearing]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
bearing series is based on a single cross-section that remains constant as the bore diameter increases, resulting in significant space and weight savings. Bearings are available in both metric and imperial boundary sizes. Depending on the design and series, bearings can be chemically and corrosion-resistant. Withstands bi-directional radial and some axial loads Thin cross-section light Low fricti
[Related Keywords : Ball Bearing]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
bearing capacity 500-800kg 1 sheet 1.Assembling computer: Special CPU Intel dual core 3.2g processor (e6700) a main board Gigabyte industrial control motherboard i41mt Memory 2G 1600 memory Hard disk Solid state 60g hard disk Chassis power supply Great Wall Power Kuteng chassis (with handle) Key mouse Golden Hotan suit monitor Hkc19 inch display system Win 7 32-bit system remarks With 2 PCI / 2 P
[Related Keywords : Measuring Device]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
5 Unit
Price:
US$ 60 ~ 150
Place of origin:
China
Supply Ability:
100 units per month
bearing in mind the tighter the curve required, the narrower width of bandsaw needed. Smallest cutable radius (mm) 16 40 65 95 145 185 305 Band Height (mm) 6 10 12 15 20 25 30 Detailed Specifications can be customized! Advantages of Moresuperhard’s Electroplated Diamond Band Saw Blades – Excellent cutting surface – The highest level of precision at high cutting speeds and performance – H
[Related Keywords : Electroplated DIA BanSaw, PCD Band Saw blades, Band Saw blades]
Business Type
Manufacturer
Location
Henan, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
25 Kilogram
Price:
US$ 670
Place of origin:
China
Supply Ability:
30000/month
thinner plates and processed by cold-forming machine. The production cost is lower and the price is cheaper, and the length control is more flexible. However, due to the rudimentary processing method, the thickness of all parts of the pile body is the same, the cross-sectional size can not be optimized, resulting in an increase in the amount of steel used; the shape of the locking part is difficu
[Related Keywords : Z Steel Sheet Pile]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Min. Order:
3000 Ton
Price:
US$ 850
Place of origin:
China
Supply Ability:
20000tons
bearing area is relatively small, and the graphite tip is easy to produce stress concentration, so the strength, plasticity, and toughness of gray cast iron are lower than other cast iron. However, it has excellent vibration damping, low notch sensitivity, and high wear resistance. Introduction to Cast Iron Molding Cast iron moldings are broadly defined as objects cast in iron, which is the most
[Related Keywords : cast iron die casting]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
thin metal plates.The thread is a common thread with an arc-shaped triangular cross-section,and the thread surface also has a high hardness.Therefore,when connecting,the screw can also tap the internal thread in the thread bottom hole of the connected part to form a connection.This screw is characterized by low screwing torque and high locking performance.It has better working performance than or
[Related Keywords : Tapping Screw]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
D51 Series Vertical Ring Rolling Machine (Reaming Machine) is a machine for hot rolling and expanding of ring blanks. This product is mostly used for bearings, flat weld flanges, high diameter flanges, small thin-walled barrel-shaped parts and other non-welded ring parts processing and production links, forging enterprises after upsetting, punching, and then reaming process; as the machine can ro
[Related Keywords : Ring, Ring Rolling Machine, Beraing Ring, Gear Blank]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 2580
Place of origin:
China
Supply Ability:
1000pcs/month
Product DescriptionProduct series1. Single Row Four Point Contact Ball Slewing Bearings.2. Single Row Crossed Roller Slewing Bearings3. Double Row Ball Slewing Bearings4. Three Row Roller Slewing Bearings5. Thin Section Slewing bearings (Light type).6. Thin Section Slewing Bearings (Flange type)Outside Diameter300 - 5000 mmGear OptionsExternal gearInternal gearWithout gearBrand NameFHRaw material
[Related Keywords : Slewing Bearing, Excavator Swing Ring, Undercarriage Parts]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Piece
Price:
US$ 91~125
Place of origin:
China
bear greater surface load under high temperature 3.the product can adapt to electric furnaces with frequent use and fast temperature increasing and decreasing 4. the protective layer of heating elements is h=thin and compact which can avoid it from falling off during using to a large extent precise electric furnaces having highter requirement on heating elements such as electric furnaces for dent
[Related Keywords : MoSi2, Type U Bent, Silicon Molybdenum Rod, furnace]
Business Type
Manufacturer
Location
Henan, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1000 Ton
Price:
US$ 200
Place of origin:
United States
Supply Ability:
120000
sections.The nominal diameter of the steel bars is 8-50 mm, and the recommended diameters are 8, 12, 16, 20, 25, 32, and 40 mm. Ribbed steel bars mainly bear tensile stress in concrete. Ribbed steel bars have greater bonding capacity with concrete due to the action of ribs, so they can better withstand external forces. Ribbed steel bars are widely used in various building structures, especially l
[Related Keywords : Steel Rebar, Deformed Steel Bar, Iron Rods for building, Hrb 400 Steel Rebar]
Business Type
Supplier
Location
Florida, United States
Employees Total
11 - 50
Annual Revenue
USD 50,000,001 - 100,000,000
Competitive thin section bearing products from various thin section bearing manufacturers and thin section bearing suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
