Tooth Wheels Wholesale

Gearbox JZQ Series China YueXin Soft Surface Tooth Decelerator Gear Reducer

• Place of origin:  

  China

tooth surface gear reducer series reducer is applicable for relative device of the crane, as well as for the driving gear of mechanical equipment used in transportation, metallurgy, chemical engineering, and light industry. Features: 1.Wide range of reduction ratio, nominal speed ratio 10-200% 2.High efficiency of mechanical drive with Class ll up to 96% and class lll up to 94%, 3.Running smoothl

[Related Keywords : Gear Reducer, Gearbox JZQ]

Brand New Sram Red AXS 2x12 with Powermeter Groupset

• Min. Order:  

  6 Set

• Price:  

  US$ 290 ~ 490

• Place of origin:  

  United States

tooth profile ensure even more efficient chain operation. The speed-dependent Orbit-Fluid vibration damping ensures reliable chain guidance, even in off-road use. You can easily configure and fine-tune the rear derailleur using your smartphone via the SRAM AXS app. An ANT+ transmitter integrated in the rear derailleur enables communication between your bike computer and the rear derailleur.This a

[Related Keywords : Sram Groupset, Road Bike, Triathlon Bike, Racing Bike]

P Planetary Gearbox

• Min. Order:  

  1 Unit

• Price:  

  US$ 2134 ~ 207456

• Place of origin:  

  China

◆ High carrying capacity, high tooth surface hardness, high accuracy, high speed, high reliability and high transmission efficiency.◆ Low noise, low cost, modular and standardized.◆ High power density, small size, light weight, compact structure, several planet wheels transmit load at the same time, so that power is shunted.◆ Up to 95% modular design, international production, faster prod

[Related Keywords : P Planetary Gearbox, Planetary Gearbox, Gearbox]

Original Polar 019290 TRI Circuit Board for Polar Cutter Machine Spare Parts Offset Printer Parts

• Min. Order:  

  1 Piece

• Price:  

  US$ 662

• Place of origin:  

  Germany

Toothed Wheel M655 061284 Disc Repair Kit 274583 Disc 424358 Wheel Bolt 250586 040181 SK66 Circuit Board Polar 016191 Polar EI 225499 Circuit Board Electric Board 027920 Shear Bolt 053062 Safety Bolt 017605 Shear Pins ZA3.017605 017605A Safety Screw 059882 Pinion Knife Change Gear 8241012 Thoothed Plate 256697 016241 IHR Circuit Board 59.15G03.001 15 Inch Display Screen Polar Air Nozzle 37*17m

[Related Keywords : Offset Printer Parts, Polar Cutting Parts, Polar 019290 TRI Board, Polar Circuit Board]

No Oil Water Injected Screw Air Compressor

• Min. Order:  

  1 Set

• Price:  

  US$ 2000 ~ 150000

• Place of origin:  

  China

wheels to form a meshing pair, installed inside the stainless steel shell. The screw's groove, the inner wall of the air end shell, and the tooth surface of the star wheel constitute the compression chamber. The motor directly drives the rotation of the screw shaft, which drives the rotation of the star wheel. The gas enters the screw groove through the suction port, undergoes compression, and is

[Related Keywords : no oil compressor]

Horizontal Rotating Rake

• Min. Order:  

  10 Piece

• Price:  

  US$ 560

• Place of origin:  

  China

• Supply Ability:  

  1000 Set/ Sets per year

The Yijia 5162 horizontal rotating rake has innovatively designed a modular rotor and replaceable toothed arm bracket, with high operational efficiency and long service life.The Yijia 5162 dual rotor rake is designed for simple and efficient operation. Two modular rotors with 20 tine arms and 80 tine arms can wrap grass into a double or two single grass strips. Innovative profiling wheel frames e

[Related Keywords : Horizontal Rotating Rake]

SFMFQ Maize Roller Mill

• Place of origin:  

  China

wheel toothed wedge belt, which does not jump or deviate, operates smoothly, and has low noise; • The tensioning device of the toothed wedge belt adopts an elastic automatic compensation structure to improve the service life of the belt; • The roller adopts automatic self-aligning roller bearings to ensure precise concentric rotation, and can withstand high rotational speed and roller pressur

[Related Keywords : Maize Roller Mill]

BMC Fourstroke 01 ONE Cross Country Mountain Bike 2022

• Min. Order:  

  4 Piece

• Price:  

  US$ 899.99 ~ 1099.99

• Place of origin:  

  Switzerland

Wheels Hubs DT Swiss XRC 1700 wheelset, 110x15mm Boost front, 148x12mm Boost rear with XD driver Wheels DT Swiss XRC 1700 wheelset, carbon, 25mm inner width Wheel Size 29" Spokes DT Swiss XRC 1700 wheelset Tires Vittoria Barzo, 29" x 2.25" Drivetrain Chain 429mm, Integrated upper slider, SRAM XX1 Eagle, 34 tooth, SRAM XX1 Eagle, 12-speed Crank SRAM XX1 Eagle Carbon, Length: 170mm (SM), 175mm (MD/

[Related Keywords : BMC Fourstroke 01 ONE, Cross Country, Mountain Bike, Trail Bike]

Rack and Pinion Pneumatic Actuator

• Min. Order:  

  1 Piece

• Price:  

  US$ 16.5

• Place of origin:  

  China

• Supply Ability:  

  6000 per month

Rack and pinion pneumatic actuator is a type of actuator that uses compressed air to move a piston that is connected to a rack and pinion mechanism.  The rack is a straight, toothed bar, while the pinion is a small, toothed wheel that engages with the rack.  When the pneumatic actuator receives a signal, the compressed air enters the piston chamber and pushes the piston, which moves the

[Related Keywords : pneumatic actuator]

BMC Fourstroke 01 Two Mountain Bike

• Min. Order:  

  1 Unit

• Price:  

  US$ 1699.29 ~ 1899.99

• Place of origin:  

  Singapore

Wheels Hubs DT Swiss XR 1700 wheelset, 110x15mm Boost front, 148x12mm Boost rear with MICRO SPLINE driver Wheels DT Swiss XR 1700 wheelset, 25mm inner width Wheel Size 29" Spokes DT Swiss XR 1700 wheelset Tires Vittoria Barzo, 29" x 2.25" Drivetrain Chain 429mm, Integrated upper slider, SRAM GX Eagle, 34 tooth, SRAM GX Eagle, 12-speed Crank SRAM GX Eagle Carbon DUB, Length: 170mm (SM), 175mm (MD/

[Related Keywords : Mountain Bike, BMC, Trail Bike, Cross Country]

Double Rail Type Hoist : HD-series

wheel adopt grease enclosed ball bearing standing hoist lood condition, easy exchange for maintenance. Wheel taper approx. 8 degree angle for I-beam and available to adopt H-beam as plain wheel without taper. * CONTROL PANEL It is composed of E.O.C.R to protect the motor and N.F.B to protect Hoist demage and two step lever cam to control highest limit. The operation of electromagnetic contac

[Related Keywords : hoist, electric wire rope hoist, rail hoist, electric chain hoist]

Stump Grinder Teeth

• Place of origin:  

  China

pockets and bolts are made with through-hardened alloy steel. CFS are manufactured using specifically formulated carbide stump grinder teeth to offer you a high quality tooth with a long cutting life. They are designed to work on all standard cutting wheels. Each stump grinder tooth fits securely into each pocket with no gauging required. We mean it when we say, 30 seconds to a new cutting edge!

[Related Keywords : Stump Grinder teeth]

180HP XG3165C Motor Grader

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

1.1 Usage: Grader of this type covers a wide range of use, including the land leveling, trenching, scratching the slope, moving earth, loosing earth, snow removing and other operations on considerably enormous floor areas such as highways, airports and farmlands. 1.2 Features: 1.2.1 The cooperation between the articulated frame and the front wheel steering promises a smaller turning radius. 1

[Related Keywords : XGMA motor grader, motor grader, XCMG motor grader, CAT motor grader]

Suction Wheel

• Place of origin:  

  China

• Price Condition:  

  FOB

Tooth Belt, Transport Belt, Thread, Conveyer Belt for 3215 Ventura，3214 Inventa Plus，3212 Inventa，3210 Aster Book Sewing Parts: Thread Carrier, Thread Hook, Thread Knife, Sewing Head, Bachmann Needle, Organ Needle, Gripper, Belt, Tooth Belt, Thread STAHL Folding Machine Parts: Suction Wheel, Feeder Sucker Complete, Bearing, Bushing, Transporter Belt, Perforation Blade, Sltter, Creasing Bla

[Related Keywords : Suction Wheel 233-029-01-00, Suction Wheel 233-002-0100, STAHL 228-146-0100, Suction wheel 233-028-0100]

Reclaimed Rubber Refiner Machine/Rubber Refinering Mill

• Min. Order:  

  1 set

• Place of origin:  

  China

• Price Condition:  

  FOB Qngdao

• Supply Ability:  

  300 sets/month

tooth, gear wheel reducer. the price is different), Almost no noise, safety and durable 2.Materials of Rolls: The roller are made of chilled cast iron alloy (LTGH), whose surface is 78HS, after quenching and precision processing it is harder than other company,(they are usually 72HS ) . The working surface is well grinded and machined.temperature uniformity in smooth surface, high hardness an

[Related Keywords : rubber refiner, rubber refiner machine, rubber refinering mill, rubber refiner mill]