Video
Min. Order:
1000 Piece
Price:
US$ 0.5 ~ 3
Place of origin:
China
two probes, often a top and a bottom compliant plunger, that can be used for testing both sides of a device or for making shorter signal paths between a tester and the device under test (DUT). Product Introduction: The probe has an outer diameter of 0.58mm and a total length of 5.7mm. Both ends of the probe are claw-shaped or pointed. Key features and uses 1.Double sided testing: Allows for simu
[Related Keywords : Double Head Probe Pin, Pin Test Probe Terminal, Dual-ended Test Probe, Dual-ended Pogo Pin]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
10 Square Meter
Price:
US$ 98 ~ 133
Place of origin:
China
Supply Ability:
10000
claws of the stainless steel docking claws; the vertical loads such as the self-weight of the glass are borne by the two claws below the docking claws, that is, the glass is suspended. The stainless steel docking claws transfer the load to the steel structure behind and finally to the main structure. Since the self-weight of the glass panels of this system is large, this force transmission method
[Related Keywords : Metal Curtain Wall]
Business Type
Manufacturer
Location
天津, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
claws, every feature is meticulously crafted to reflect the iconic look of this prehistoric giant. The costume is designed for dynamic performance, allowing natural head, tail, and limb motions that make the T-Rex appear as if it’s straight out of the Jurassic era. Key Features of T-Rex Realistic Dinosaur Costume : • Hyper-Realistic Design: Meticulous attention to detail with authentic skin t
[Related Keywords : Dinosaur Costume]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
600 Piece
Price:
US$ 8.6
Place of origin:
China
fiberglass with 100% plastic-coated in one color, fiberglass with 100% plastic-coated in two colors 4) Fixation: AB resin, wooden wedge, wooden wedge with metal ring, plastic wedge, plastic wedge with claw Being fine in quality, rich in variety and complete in specification, our products sell well in different countries and regions over the world and have enjoyed high reputation from clients.
[Related Keywords : splitting axe, stiking tools, garden tools, log splitter]
Business Type
Manufacturer
Location
SHANDONG, China
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Piece
Price:
US$ 9.99
Place of origin:
China
claws, displace more water and create attention-grabbing action that bass can't resist. Can be fished on a Texas Rig or No Sinker Rig, with up to a 4/0 hook, or used as a jig trailer to bulk up the bait. Proven Color: The tested and proven color help you match the hatch on any body of water, ideal for any fishing conditions that needs an enhanced action. Colorful Glitter: Features different color
[Related Keywords : Creature Baits]
Business Type
Supplier
Location
Hubei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Unit
Price:
US$ 100000 ~ 200000
Place of origin:
China
Supply Ability:
10,000 Set/ Sets per Month
claw layout greatly increase drying heating efficiency and reduce fuel consumption. * The optimal combination of two-grade dust filter system which is established based on the simulation analysis could obtain best filter effect. * High efficient vibratory screener, designed based on the simulation analysis and experiment test, has the optimal structure, best performance, realizes the efficient sc
[Related Keywords : hot mix asphalt plant, asphalt plants, mobile asphalt plant, asphalt mixing plant]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
1 Ton
Price:
US$ 1000
Place of origin:
China
Supply Ability:
50tons/day
4 prong T nuts PRODUCTS DESCRIPTION Four-claw nuts are parts that are tightly connected with mechanical equipment. They can only be connected by internal threads with the same specifications. For example, M4-P.7 nuts can only be connected with M4-P.7 series bolts (in nuts, the inner diameter of M4 finger nuts is about 4mm, and the distance between 0.7 finger and two threaded teeth is 0.7mm). Xinl
[Related Keywords : Four-claw nuts]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
two-claw type,three-claw type,four-claw type,six-claw type,eight-claw type, ten-claw type, twelve-claw type etc.Dust fre cutting machine saw blade cutting machine or planetary cutting machine can be applied,the property of machine group is reliable.The production efficiency is high with special device,it can produce inner wall spiral pipe inner wall hollow pipe ,and core layer foam pipe.It can al
[Related Keywords : Plastic Pipe Machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
two types of handle for choice Claw Grasping Forceps Excellent for slippery tissues for organs 360° finger-tip rotation for precise control of tip orientation Laparoscopic Babcock Forceps Excellent for tubular organs φ5*330mm working size with sfatey insulated shaft Advantages of Laparoscopic Gallbladder Grasper Product Descriptions Boer laparoscopic right angle grasper has the popular length 3
[Related Keywords : Disposable Laparoscopic]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Ton
Price:
US$ 2200
Place of origin:
China
Cyetpyrafen (SYP-9625) Wholesale Suspending agent, Acrylonitrile is a kind of new kind of acaricide, belongs to the systemic acaricide, mainly through the tag and the role of the stomach poison to kill mites, common for all kinds of crops against mites has better control effect, leaves, flowers, vegetables and other crops to cotton mites, leaf mites in the beginning, the claw mites, two variegate
[Related Keywords : curing agent]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
1. Production Description of 54'' Cat Tree Tower Condo Furniture Features: Quality and Protective Materials: The 54'' Cat Tree Tower Condo Furniture is composed of good quality 0.5in particle board with 400g skin-friendly plush covering, reinforced posts are wrapped with natural sisal rope for cats to scratch and sharpen their claws without damaging your own furniture.Lovely and Lively Designs:
[Related Keywords : Cat Tree Tower]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
claw. Why do welding rods need to be kept dry? Electrodes that have been degraded by moisture will not deposit quality welds as well as a dry rod will. Rods that have absorbed too much moisture may lead to weld cracking and porosity. Other welding characteristics such as arc performance may be affected as well. A low hydrogen rod coating that has absorbed moisture may result in a weld with hydrog
[Related Keywords : Welding Rod Dryer]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
30set per month
two directions. 5) The three - paw frame is three - claw synchronizing. After replacing the sand paper, the precision of the repositioning is high. 3.Technical indicators 1)grinding diameter: Dia118-Dia450mm DN100-400mm( 4"-16" ) 2)used for valve seat of plane globe valve,valve seat of safety valve . 3) spindle speed(rpm):0-900,0-2800 4)the greatest grinding depth: 850 mm 5)Power supply: 220 V/50
[Related Keywords : portable valve grinder, Grinding Lapping Machine, Grinding Machine]
Business Type
Supplier
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Video
Min. Order:
1 Set
Price:
US$ 10000 ~ 50000
Place of origin:
China
two claw belt type high speed tractor adopts stepless frequency speed control to meet the requirements for hauling stability Precise pneumatic cutter or automatic winder: automatically cut or collect the sealing strip according to customers’ requirement to reduce the labor strength and improve production efficiency. 3. Main technical parameters Production Line Speed:2-8m/minPower:about 26kwAppe
[Related Keywords : TPU seal strip machine, seal strip machine, pvc strip machine, seal strip extrusion]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Claws:SUS.Collar: Polyacetal .Sleeve: Polyacetal blqd® Straight Microduct Connector Features Connect two microducts which are the same outer diameter. Easy installation,without any special tools. Transparent plastic body,easy to observe the situation. High Temperature resistance -20℃--+50℃ High Pressure resistance >25bar. IP Rate: IP68 FR Resistance style also available V0 Stanadard:EN50411R
[Related Keywords : Microduct Connector]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 17100 ~ 27000
Place of origin:
China
Two parallel mixing paddles run in accord with the set fixed rotation ratio, high speed rotating on its own axis at the same time of orbital revolution. There is scraper runs together with paddles’ orbital revolution in the mixing tank, which moves the material to the paddles from tank wall, To archive the different shearing, The direction of both orbital revolution and rotating on its own axis
[Related Keywords : Polymer Slurry mixing machine, Slurry mixer, Mixing machine]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1 Set
Price:
US$ 50
Place of origin:
China
claw, cone, bearing, water eye and so on. According to the roller structure, it can be divided into two types: milling tooth type and insert tooth type. According to the bearing structure, it can be divided into sealed (or unsealed) rolling bearing and sealed (or unsealed) sliding bearing. The roller cone bit is suitable for drilling various formations. Most extensive. ②Diamond drills were init
[Related Keywords : pressure gauges for sale]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Place of origin:
China
claw blade and spiral hob. Crusher, spiral hob rotates blades at high speed to crush plastic products. It has the characteristics of high production efficiency and uniform particles. The process is more complicated than a flat knife. 3: The powerful crusher blade is suitable for crushing most plastic products such as sheets, pipes, profiles, plates and packaging materials. 4: There are two types
[Related Keywords : plastic recycling crusher blades]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Supply Ability:
1800000 square meters per month
two basic types of flexible security system technology and products to prevent geological disasters of various slopes and avalanche slope, bank erosion, blasting stone fly, falling objects and other hazards. Flexible system for protecting slope is composed of steel wire ropes,high-strength steel wire grids, anchor rods, uprights, up and down anchor ropes, energy dissipation rings and so on. The s
[Related Keywords : SNS Flexible System, Cheap Gabion Cages]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Min. Order:
1 Set
Price:
US$ 12000
Place of origin:
China
Supply Ability:
20 sets per month
Technical performance and feature 1. YFT-B vertical series hydraulic valve test bench is suitable for the shell and seal test of the valves below DN-300, it has two types of plane blind plates: plastic seal plates for non-flange valve test and O rings seal plates for flange valve test.2. The work panel has claws and the upward side has impact cylinder.3. the top beam can be turned over 90 degrees
[Related Keywords : valve test machine]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Competitive two claws products from various two claws manufacturers and two claws suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
