Key Features
16*100/1000Base-X SFP, 8*1000Base SFP/RJ45Combo, 4*1G/2.5/10GGBase-X SFP+ slots
AC/DC redundant power supply with polarity reverse/over-voltage/over-current protection
Support USB one key configuration&upgrading
DI/DO/RS485 are optional
Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4, ECMP, VRRP
Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping
port mirroring QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping
client Ping/Tracert test, ACL, QoS and SFP DDM function
Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download via web interface, firmware upgrade via HTTP/TFTP/USB
Support G.8032 ERPS protocol, recovery time ≤20ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
IP40 fan-less and Din-rail design
Operation temperature: -40℃ ~+75℃
With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.
Specification
Product Name: 32 port Hybrid Rate Rack Layer 3 Managed Industrial Ethernet Switch
Port
16*10/100/1000Base-T SFP
8*COMBO SFP/RJ45
4*1G/2.5G/10GBase-X SFP+
1*RJ45 Console port(115200,8,N,1)
1*USB 2.0 for configuration and firmware update
Data&Alarm Port(Optional)
1 channel RS485
1 channel DI(digital input)
1 channel DO(digital output)
Network Medium
10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter)
100BASE-TX: Cat 5 or above UTP (≤100 meter)
1000BASE-TX: Cat5 or above UTP (≤100 meter)
Network Protocol
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.3z 1000Base-X Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1Q VLAN
ITU-T G.8032 ERPS
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3ad LACP
Fiber Option
SFP Plugable Module(LC)
SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km
MM: 1310nm, 2Km; 850nm, 500-meter
Switching Capacity: 128Gbps
Throughput: 190.4Mpps
Packet Buffer: 12M
MAC Address: 16K
VLAN: 4K
Jumbo Frame: 10K bytes
Transfer Mode: Store and forward, forwarding delay<5us
MDX/MIDX: Support
Watchdog: Support
Network Topology
Star topology
Bus topology
Tree Topology
MTBF: 200,000 hours
Power Voltage
Input Voltage: 36-75VDC, 100~240VAC
Redundant power input
Removable 2*2-pin terminal block(DC/DC)
3-pin AC socket(AC/AC)
Input current: 1.2A DC/AC input Max
Total power consumption: Full loading ≤40W
Reverse polarity protection: Support
Reverse polarity protection: Support
Over-voltage protection: Support
Industry Standard
EMI: FCC Part 15B Class A
Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us)
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us)
RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m
EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K
CS: IEC 61000-4-6 10V
ESD: IEC 61000-4-2 Level 4(8K/15K)
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Protection Level: IP40
Installation Method: Din Mounted
Security Certificate: CE/FCC/RoHS
Working Temperature: -40℃~75℃
Storage Temperature: -40℃~85℃
Relative Humidity: 5%~95%, non-condensing
LED Indicators
PWR(Power indicator), Green Color
On: power status is normal
Off: power off or power connection failure
S(System indicator), Red Color
On: Normal operation
Off: Connection failure
Blinking: Device initialization
USB(USB status indicator), Green Color
On: USB flash drive is detected by device
Blinking: the device is reading and writing the data from USB flash drive
Off: USB flash drive is not inserted or not detected by device
ALM(Fault status indicator), Red Color
On: Fault alarm
Off: Device on normal working state
Ethernet Port
1. Green Indicator
On: port link up
Off: port link down
Blinking: data is in normal transmission
2. Yellow Indicator
On: port speed is 1000M
Off: port speed is 10/100M
Fiber port, Green Color
On: port link up
Off: port link down
Blinking: data is in normal transmission
L3 Function
ARP: ARP table aging
DHCP server
IPv4/IPv6: Static routing
ECMP
Support ECMP (Equal-cost multi-path routing)
Support the configuration of ECMP Max next-hop
Support capacity balanced configuration
Route policy: IPv4 prefix-list
VRRP: Virtual Router Redundancy Protocol
Routing Protocol Specification
RIP: RIPv1/v2
OSPFv2: OSPFv2
BGP4
BGP4
BGP Support Routing Recursive ECMP
Support to view the number of neighbors and up/down state
IS-IS: IS-ISv4
Routing entry: 13K
L2 Function
Port aggregation
Support GE port aggregation
Support 2.5GE aggregation
Support 10GE aggregation
Support static aggregation
Support LACP dynamic aggregation
Up to 64 aggregation groups and up to 8 ports per group
Port features
Support IEEE802.3x flow control
Support interface counters
Support port isolationPort mirroring(One-to-One, Many-to-One)
Support loop detection(Port-based; VLAN-based)
Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)
Mac-address table management
Support static Mac-address management
Support dynamic Mac-address Management
Support filtering Mac-address
Support MAC limit based on port and VLAN
Support MAC flapping based on port and VLAN
VLAN
Support access mode
Support trunk mode
Support hybrid mode
VLAN classification
Mac Based VLAN
IP Based VLAN
Protocol Based VLAN
GVRP
Normal mode
Fixed mode
Forbidden mode
QinQ
Port-based QinQ
VLAN-based QinQ(VLAN-stacking; VLAN-mapping)
Flow-based QinQ
LLDP
LLDP(Link Layer Discovery Protocol)
Ring network protocol
Support IEEE802.1D-STP
Support IEEE802.1W-RSTP
Support IEEE802.1S-MSTP
Support G.8032 ERPS protocol, single ring, sub Ring and major ring
Recovery time ≤20ms
L2 Multicast
IGMP snooping: Support IGMP snooping
Group address: Support group address
Security Function
ACL
IP Standard ACL
MAC extend ACL
IP extend ACL
IPv6 ACL
QoS
Support QoS Class, remarking
Support SP, WRR queue scheduling
Ingress port-based rate-limit
Egress port-based rate-limit
Support policy-based QoS
802.1x
Port access control
lMac-address access control
RADIUS server
Port-security: Port-security
IP source guard: IP Port/MAC binding
ARP-check: Support ARP-check and ARP packet filtering for illegal users
Access control: Support Telnet/SSH/HTTP/HTTPS user access control
Management&Maintenance Function
User Management
Support password protection
Support user authorization management
SNMP: Supporting SNMP V1/V2C/V3 version
Web Management
Web Management
Support HTTP V1.1
Support HTTPS
CLI management: Console/Telnet command line management
RMON: Support RMON(Remote Monitoring) alarm
Firmware upgrade: Firmware upgrade
Fault Detection
Ping/Tracerout
Dying gasp
Support optical transceiver DDM function
Cable detection: Support copper port cable detection
NTP: Network Time Protocol
Syslog/Debug
Syslog/Debug
Syslog send to two servers
Configuration import/export
Support FTP/TFTP remote import/export
Support USB import/export
Dual partition management: Support dual partition switching
Application Protocol Function
DHCP Snooping
DHCP snooping trust port
Support remote-id/circuit-id configuration
DHCP option-82
DHCP client: Support DHCP client
Telnet server: Support telnet server
Telnet client: Support telnet client
SSH server: Support SSH server
TACACS: Support TACACS(the terminal access controller accesses the control system)
SFlow: Support network traffic analysis
TFTP: Support TFTP Client
Mechanical Drawing
Packing List
1pc switch
1pc user manual
1pc console cable
