Transfer window is air purification equipment used with clean plant, which is suitable for medium and small goods transfer between clean room and clean room or between clean room and non-clean room. By using the transfer window, the number of opening and closing doors of the clean room can be reduced, and the pollution in the clean area can be reduced to a lower degree. The products are widely used in microfine technology, electronic industry, biological laboratory, pharmaceutical factory, hospital, food processing industry and other air purification places.
Performance characteristics
1. The box body is made of high quality SUS304 stainless steel or steel plate baking paint, smooth and easy to clean.
2. Double doors interlock, effectively prevent cross-contamination.
3. Special sanitary silicone seal to ensure air tightness.
4. Equipped with UV sterilization lamp to meet GMP requirements.
5. Structure design safety, easy installation, good clean room compatibility.
Optional Accessories
1.Buzzer
2. Walkie-talkie
3. UV germicidal lamp
4. Pneumatic lift gate
5. Inner wall rounding process
Specification:
Model | External dimension W×D×H(mm) | Internal dimension W×D×H(mm) |
SL-CDE600 | 600×600×600 | 440×520×480 |
SL-CDC600 | 760×700×660 | 600×600×600 |
SL-CDE1000 | 1000×1000×1000 | 840×920×880 |
SL-CDC1000 | 1160×1100×1060 | 1000×1000×1000 |
Installation method
Choose a convenient location in the wall to open the hole, the hole is generally larger than the transfer window outer diameter of about 10mm, the transfer window into the wall, generally installed in the middle of the wall, keep the balance fixed, with rounded corners or other decorative strips to decorate the gap between the transfer window and the wall, play glue seal trim can be.
Operation specification
1. Wipe the articles to be passed with 0.5% peroxyacetic acid or 5% iodophor solution.
2. Open the outer door of the transfer window, quickly place the articles to be transferred, disinfect the transfer window with 0.5% peroxyacetic acid spray, and close the outer door of the transfer window.
3. Turn on the UV lamp inside the transfer window and irradiate the items to be transferred with UV light for at least 15 minutes.
4. Notify the lab personnel or staff in the barrier system to open the inner door of the transfer window and take out the items.
5. Close the inner door of the transfer window.
