There are 136 Color coated aluminum coil from 62 suppliers on EC21.com
Related Searches : aluminum , aluminium , acp , aluminum composite panel , die casting , casting , alumina
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
About US
HAOMEI----specializes in producing color coated aluminum for Exterior and Interior applications,. color coated aluminum are widely used in ACP,curtain panel,honey comb panel,shutter,roofing and most of the decoration areas. We have introduced in most advanced computerized metal processing equipment ,Pre-treatment by the German pharmaceutical Henkel and Kenema Mittel. PPG paint coatings using the United States, Sweden BECKER paint, the United States Lili valspar paint. PVDF, perfluorocarbons can be divided into surface coatings, self-cleaning nano-Kang Wu fluorocarbon coating, coated polyester, acrylic coating.With the superior quality and advanced management,our products had been export to Euro, Middle East, North America ,East Asia and many other areas and countriers.
Color coated aluminum sheet/coil
Specification
Substrates: |
Aluminium (AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc), etc. |
Thickness: |
0.15-4.0mm |
Width: |
<1800mm |
Coils core diameter: |
150mm ,405mm, 505mm, 508mm, 510mm |
Coating thickness: |
PVDF >=25micron POLYESTER>=18micron |
Color standard: |
E < 2 or it is not obvious by eyeballing |
Pencil hardness: |
> 2HB |
Coating adhesive: |
not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993) |
Bend stength: |
>100 times |
Boiling point: |
no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours) |
Corrosive: |
surface deep in the 5% muriatic acid and 5% NaCL, interior deep in the 2% muriatic acid and 2% NaCL, after 48 hours, no change |
Feather:
1, Material:Pre-treatment material from HenKel &Chemtell from Germany,
2, Paint: 70% PVDF from PPG or Valspar;
3.Pretreatment: the raw aluminum has to be washed by acid, and chromized. After it is dried out, it will be covered by oxide film to heighten the adhesion.
4, Colors: Can do as your requirement We are the first one to pass CTC of national testing certification center of building materials.
5. Good quality for Benting:
6. Polyester coating ingle coating, one layer, 18μm; double coating, two layers, 25~27μm.
PVDF coating: two layers of PVDF coating, at least 25μm, and if required, it will be covered by another layer of varnish, 35μm in total.
6.Application:
Application |
Exterior applications |
wall cladding, facades, roofs and canopies, tunnels, |
Interior applications |
wall cladding, ceilings, bathrooms, kitchens and |
|
Advertisement and market applications |
display platforms, signboards, fascia and shop fronts |
Packing
Standard export packing as follow:
Plastic film wrapped inside and carton packing. Wooden pallet with steel strip tied.
Buyers can slao choose to pay for wooden case packing, which enables safer and more room saving in loading.
Eye to Wall |
Eye to Sky |
parameters of PVDF Coating
PVDF (KYNAR500 PVDF>70%)
Item |
Result |
Test standard |
Coating thicknesss |
≥ 25 μm |
ISO 2360 ( CNS 8406 ) |
Pencil Hardness |
≥ 1H |
ASTM D3363 |
Color Retention |
Aging resistance test 4000 hours, maximum 5 units |
ASTM D2244 |
Glossr Retention |
Aging resistance test 4000 hours, 90% |
ASTM D2244 |
Chalk resistanc |
Aging resistance test 4000 hours, maximum 8 units |
ASTM D659 |
Flexibility( T shape bending ) |
IT, no crack |
ASTM D4145 |
Adhesiv |
1mm×1mm,No peeled off |
ASTM D3359 |
Impact resistance |
No crack, no dropout |
ASTM D2794 |
Friction resistance |
64.6 L/mil |
ASTM D968 |
Salt spray resistance |
3000 hours no change( 5%NaCL,35℃) |
ASTM D117 |
Humidity resistance |
3000 hours no change( 100RH35℃) |
ASTM D714 |
Mortar Resistance |
No change |
ASTM D605 |
Acid-resistance and alkali-resistance |
No change |
ASTM D1308 |
Solvent resistanc |
No change MEK 100times |
ASTM D2248 |
Registration Date | 2012/07/17(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Manufacturer |
Year established | 1997 |
Employees total | 101 - 500 |
Annual revenue | USD 10,000,001 - 50,000,000 |
Company | Haomei Industrial Co., Ltd |
---|---|
Address | 1103. first int., No. 14 Waihuan road, CBDZhengzhouHenan450046China |
Phone | 86 - 0371 - 65621391 |
Fax | 86 - 0371 - 65621393 |
Homepage | http://www.thick-aluminum-plate.com |
Contact | Ben Ma |