Zhuoji Zhuoji Brand CNC machine for grinding and polishing gem cutting surface, facet angle

(The sixth generation new model)

No. 810501888 Model XX-6M

The automatic machine is operated by 5 stepper motors, and the functions of each motor are as follows:

Y1 motor function: responsible for turning plate position (like octagonal hand or manipulator)

Y2 motor function: it is responsible for the angle or force of sanding downward (the greater the number is, the lower the direction)

Y3 motor function: it is responsible for swinging the machine head to the left or right, that is, setting the sand time, (the larger the number, the higher the direction of throwing the disc)

Y4 motor function: it is responsible for raising and lowering (such as the lifting table of octagonal hand). (The larger the number is, the higher it is)

Y5 motor function: responsible for forward and backward movement (the larger the number, the more forward)

Input board position --- y1 parameter (input the y1 value of the first board)

Adjust the stone --- y1 parameter (overall adjustment)

Raise and lower the height --- y4 parameter (height)

Direction adjustment lower swing angle - y2 parameter (y2 off disc height)

Height readjustment --- y4 parameter (height)

Overall increase and decrease of force - y2 parameter (overall increase and decrease of y2 force)

Polishing force --- y2 parameter (note: polishing force starts from 80)

Increase and decrease the force of each plate separately -- y2 parameter (the force of the first plate starts to be found)

Forward and reverse (stroke)

Rowing and clicking --- y3//y5 mode: forward and reverse (rowing), sand (clicking)

Stroke length, stroke short distance --- y5 parameter (y5 landing position)

Speed of rowing fast and slow --- speed setting (y5 speed)

Speed when sanding down: speed setting (v2 low speed), y2 parameter (y2 low speed height)

Polishing parameter operation function

Y3 parameter (y3 position: adjust to about 7000) --- test y4 parameter (y4 height) --- test

Y2 parameter (y2 off disc height) --- readjust y4 parameter (y4 overall lifting) --- adjust the stroke length and stroke short distance

Y5 parameter (y5 sliding distance) --- Increase force y2 parameter (overall increase or decrease of y2 force)

The number of processable layers is 1-10, and each layer has 16 plates

On the basis of the original functions, add types and size subdivision

1: Two types of gemstones have been added to the control box. The original gemstones are round, egg shaped, pear shaped, horse eye shaped, long shaped, rectangular, triangle shaped and heart shaped

2: Size subdivision, for example: 15 sizes can be saved in egg type, such as 5X7 7X9 10X12 10X14 12X16 (the old machine does not have this function)

3: The speed can be adjusted arbitrarily during the processing according to the needs, with high molding efficiency, uniform inch shape and high precision

Applicable to: corundum, spinel, ruby, turquoise, olivine, topaz/topaz, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass

Machinable shapes: round, oval, square, rectangle, triangle, pear, heart, water drop, horse eye, plum blossom, star, leaf, axe, three-dimensional bead, three-dimensional water drop, three-dimensional triangle square ring face, egg shaped ring face, pear shaped ring face, bracelet, intermediate finger, flat bead, round bead, etc

Lemon crystal stone 4x5, 8 hours a day, 1 person, 100 workpieces, 1 engineer, 3 machines

Auxiliary materials: diamond forming disc/polishing disc/polishing powder

Technical parameters:

Processing size: diameter 4-30mm

Size of processed gemstone: length 30X width 20X thickness 10mm

Control system: PLC program control programming

Maximum processing efficiency: 120-300 seconds

Processing quantity: 4x5 honing, 8 hours, 1 person, 100 workpieces

English system can be switched

Maximum loaded grinding plate size: 8 inches (200mm)

Maximum loaded polishing disc size: 8 inches (200mm)

Input voltage: AC220V

Motor power: 200W

Main speed: 2800r/min